Nitecore NB10000 GEN2 휴대용 충전기 사용 설명서

1. 서론

The Nitecore NB10000 GEN2 is an ultra-lightweight, high-capacity portable charger designed for efficient power delivery to various electronic devices. Featuring a 10,000mAh battery, dual output ports, and multiple protection mechanisms, it is suitable for outdoor activities, travel, and daily use.

Figure 1: Nitecore NB10000 GEN2 Portable Charger

2. 제품 특징

• Ultra-Lightweight & Compact Design: Constructed with a carbon fiber polymer frame and carbon fiber sheets, weighing only 5.29oz (150g) and measuring 4.8'' x 2.32'' x 0.42''.
• 대용량: 10,000mAh Li-Po battery provides sufficient power for multiple charges of smartphones, headlamps, and other devices.
• Dual-Output Fast Charging: Equipped with one 18W USB-A output port and one 20W USB-C (PD + QC 3.0) two-way output/input port, allowing simultaneous charging of two devices.
• Secure Charging Protection: Integrated safeguards against overcurrent, short-circuit, over-discharge, overcharge, overvoltage, 과열.
• IPX7 방수 등급: Provides protection against water immersion up to 1 meter for 30 minutes.

Figure 2: Lightweight Carbon Fiber Construction

Figure 3: Dual-Output Ports for Fast Charging

3. 설정 및 작동

3.1 파워뱅크 충전하기

To charge the NB10000, connect it to a power source (e.g., wall adapter, computer USB port) using a USB-C cable. The USB-C port supports 18W input for rapid recharging. The blue LED indicators will illuminate to show the charging progress.

3.2 외부 장치 충전

Connect your device to the NB10000 using a compatible USB cable. The power bank features one USB-A output (18W) and one USB-C output (20W PD + QC 3.0). It can charge two devices simultaneously.

3.3 저전류 모드

For charging low-current devices such as wireless headphones or wearables, press and hold the Mode Button (power button) to activate Low Current Mode. A dedicated indicator will illuminate to confirm activation. This mode ensures safe and optimized charging for sensitive electronics.

Figure 4: Low Current Mode and Power Level Display

4. Power Level Display

The NB10000 features blue LED indicators to display the remaining battery power:

• 3 Constant-on LEDs: Approximately 100% power.
• 2 Constant-on LEDs: Approximately 70% power.
• 1 Constant-on LED: Approximately 30% power.
• 1 Flashing LED: Nearly depleted.

5. 안전 정보

The Nitecore NB10000 GEN2 is equipped with multiple safety features to ensure reliable operation and protect your devices:

• 과전류 보호
• 단락 보호
• 과방 전 보호
• 과충전 보호
• 오버볼tage 보호
• 열 보호

The device has an IPX7 waterproof rating, meaning it can withstand accidental immersion in water up to 1 meter for 30 minutes. However, it is crucial ~ 아니다 to charge or discharge the power bank while it is wet or submerged. Ensure all ports are dry before use.

그림 5: 통합 안전 보호 장치

6. 사양

7. 유지관리

• 보조 배터리를 극한 온도, 직사광선 및 부식성 물질로부터 멀리하십시오.
• 부드럽고 마른 천으로 기기를 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
• 장기간 사용하지 않을 때에는 시원하고 건조한 곳에 보관하세요.

8. 문제 해결

• 장치가 충전되지 않음: Ensure the charging cable is securely connected to both the power bank and the power source/device. Check if the power source is active.
• 느린 충전: Verify that the cables and adapters used support fast charging protocols (PD/QC 3.0) if fast charging is desired. Some devices may limit charging speed.
• LED 표시등이 작동하지 않습니다. Press the power button to check the battery level. If the device is unresponsive, try connecting it to a power source to see if it reactivates.

9. 보증 및 지원

The Nitecore NB10000 GEN2 Portable Charger typically comes with a 1-Year Protection Plan. For warranty claims, technical support, or further assistance, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty validation.

10. 공식 제품 영상