중요한 안전 정보
Operating a laser engraver requires strict adherence to safety guidelines to prevent injury and damage. Always read and understand all instructions before use.
- 눈 보호: Always wear the provided laser safety glasses when the machine is in operation. The laser filter cover on the S9 filters 98% of ultraviolet light, but direct exposure can still cause severe eye damage.
- 화재 위험: 레이저 조각 및 절단 작업은 열과 불꽃을 발생시켜 화재를 일으킬 수 있습니다. 작동 중에는 절대로 기계를 방치하지 마십시오. 소화기를 즉시 사용할 수 있도록 비치하십시오.
- 통풍: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving/cutting.
- 재료 안전: Only engrave or cut materials specified as safe. Some materials can produce toxic fumes or catch fire easily.
- 작업 표면 보호: Use the A4 steel pad provided to protect your work surface from laser damage and to isolate potential fire risks.
- 비상 정지 : Familiarize yourself with the location of the emergency power switch on the S9 machine for immediate shutdown.
The laser module features a protective cover to help filter harmful light, enhancing eye safety during operation.
A safety metal pad is included to protect your table from laser penetration and reduce fire risks.
제품 끝view
The SCULPFUN S9 is a high-performance laser engraver and cutter designed for precision work on a variety of materials. It features advanced laser beam shaping technology, an all-metal structure for stability, and a user-friendly fixed-focus design.
The SCULPFUN S9 machine, showcasing its robust design and examples of its engraving and cutting capabilities on different materials.
주요 특징
- Laser Beam Shaping Technology: Utilizes a 5.5W diode laser with an ultra-fine 0.06mm laser focus, providing a 90W CO2 laser effect for strong cutting penetration and fine engraving.
- 높은 정밀도: Achieves an engraving precision of 0.01mm, allowing for incredibly detailed work.
- Fixed-Focus Design: Features a combination of a fixed-focus lens and a sliding design for quick and easy focusing by simply moving the laser and tightening screws.
- Robust All-Metal Structure: Ensures extreme sturdiness and enhances engraving accuracy, designed for quick assembly within 10-20 minutes.
- 넓은 조각 영역: Offers a generous 410mm x 420mm working area to accommodate various project sizes.
- 광범위한 호환성: Supports popular engraving software such as LaserGRBL, LightBurn, Benbox, Grbl Controller, and LiteFire, compatible with Windows and MAC systems, and various file formats (JPG, PNG, DXNF, SVG, G-Code, BC, BMP).
상세한 view of the laser module, emphasizing its advanced laser beam shaping technology for superior performance.
Visual comparison illustrating the thinner, more effective energy range of the S9 laser compared to an ordinary square laser.
A magnified image demonstrating the ultra-thin, high-precision engraving line capability of the S9, as fine as 0.08mm.
조립 및 설정
The SCULPFUN S9 is designed for quick and straightforward assembly. Follow these general steps to set up your machine:
- 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼내어 포장 목록과 대조하여 확인하십시오.
- 프레임 조립: Connect the aluminum profiles to form the main frame of the engraver. The design allows for rapid assembly, typically within 10-20 minutes.
- 레이저 모듈 설치: Mount the laser module onto the gantry. Ensure it is securely fastened.
- 케이블 연결: Attach all necessary power and data cables according to the provided diagrams.
- 전원 켜기: Connect the power adapter and turn on the machine using the main power switch.
Visual guide illustrating the simple, step-by-step assembly process for the SCULPFUN S9.
레이저 초점 맞추기
The S9 features a fixed-focus laser combined with a sliding design for easy focusing. To set the focus:
- Place the material to be engraved or cut on the work surface.
- Move the laser module down until the fixed-focus spacer (usually a small metal cylinder) touches the material surface.
- Tighten the screws on the laser module to secure it in this position.
- Remove the fixed-focus spacer. The laser is now correctly focused for your material.
Operating the SCULPFUN S9
소프트웨어 호환성
The SCULPFUN S9 is compatible with a wide range of sophisticated engraving software, offering flexibility for your projects:
- 레이저GRBL
- LightBurn (supports MAC system)
- Benbox
- Grbl Controller
- LiteFire
It supports PWM engraving mode and various file formats including JPG, PNG, DXF, SVG, G-Code, BC, and BMP.
The SCULPFUN S9 offers broad compatibility with popular laser engraving software, enhancing user flexibility.
지원 자료
The S9 can engrave and cut a diverse range of materials:
- 조각 재료: Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, black stone.
- 절단 재료: Wood (up to 15mm thick), acrylic board (up to 10mm thick), cardboard, non-woven fabric, bamboo, certain plastic boards.
A visual display of the SCULPFUN S9's versatility, showing successful engraving and cutting on a wide array of materials.
Images demonstrating the S9's impressive cutting capabilities on thick materials like 15mm wood, 10mm plywood, and 10mm acrylic.
기본 작업 단계
- 디자인 준비: Create or import your design using your chosen engraving software. Adjust settings such as power, speed, and passes according to your material and desired outcome.
- 장소 재료: Securely place your material on the work surface, ensuring it is flat and within the engraving area. Use the A4 steel pad underneath.
- Set Focus: Follow the fixed-focus procedure described in the Setup section to ensure optimal laser focus.
- 기계 연결: 조각기를 USB 케이블로 컴퓨터에 연결하세요.
- 작업 시작: Initiate the engraving or cutting process from your software.
- 진행 상황 모니터링: Stay near the machine and monitor the process for any issues, especially fire hazards.
- 전원 끄기 : Once the process is complete, turn off the machine and disconnect it from the power source.
유지 보수 및 관리
Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 laser engraver.
- 레이저 렌즈 청소: 레이저의 출력과 정밀도를 유지하려면 주기적으로 부드럽고 보풀 없는 천과 렌즈 세척액을 사용하여 레이저 렌즈를 청소하십시오.
- 벨트와 레일을 검사하세요: Check the tension of the timing belts and ensure the guide rails are clean and free of debris. Lubricate rails if necessary, using appropriate lubricant.
- 일반 청소: Keep the machine free of dust and material residue. Use compressed air to clean hard-to-reach areas.
- 펌웨어 업데이트: 제조사 확인해보세요 website for any available firmware updates to ensure your machine runs with the latest improvements.
일반적인 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대한 해결책을 제공합니다.
| 문제 | 가능한 원인 및 해결책 |
|---|---|
| 기계 전원이 켜지지 않습니다 |
|
| 레이저가 작동하지 않거나 출력이 약합니다. |
|
| 조각/절단 품질이 좋지 않음 |
|
| Machine not responding to software |
|
| 작동 중 비정상적인 소음 |
|
기술 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | S9 |
| 레이저 파워 | 5.5W Diode Laser (90W CO2 laser effect) |
| 레이저 파장 | 455 ± 5nm |
| 조각 영역 | 410mm x 420mm |
| 조각 정밀도 | 0.01mm |
| 최대 절단 두께 | 15mm wood, 10mm acrylic |
| 제품 크기(L x W x H) | 41 x 42 x 0.1cm |
| 제품 무게 | 4.62kg |
| 작동 모드 | 수동 |
| 제조업체 | Inncen |
보증 및 고객 지원
The SCULPFUN S9 Laser Engraver Machine comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's web구체적인 보증 약관은 해당 사이트에서 확인하세요.
For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact the manufacturer or your point of purchase. Keep your purchase receipt and model number (S9) handy when contacting support.
