1. 서론
This manual provides detailed instructions for the safe and effective use of your Pinty 1x30 4 MOA Red/Green Dot Sight. Designed for sporting activities, this sight offers quick target acquisition with its dual-color reticle and robust construction. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your device.

Image: The Pinty 1x30 4 MOA Red/Green Dot Sight, a compact and durable optical device.
2. 안전 정보
- Always handle the sight and any associated equipment responsibly.
- Never look directly at the sun or any intense light source through the sight, as this can cause permanent eye damage.
- Ensure the sight is securely mounted before use to prevent injury or damage.
- 배터리는 어린이의 손이 닿지 않는 곳에 보관하십시오. 삼켰을 경우 즉시 의사의 진료를 받으십시오.
- Do not attempt to disassemble or modify the sight, as this may void the warranty and cause damage.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1x Pinty 1x30 Red/Green Dot Sight
- 1x 육각 렌치
- 1x 청소 천
- 1x CR2032 배터리
- 1x 사용자 설명서

Image: Contents of the Pinty Red/Green Dot Sight package.
4. 설정 및 설치
4.1 배터리 설치
- Locate the battery compartment cap, usually on the side of the illumination dial.
- 캡을 시계 반대 방향으로 돌려서 풉니다.
- Insert one CR2032 battery with the positive (+) side facing outwards.
- Screw the cap back on clockwise until secure, ensuring a tight seal.
4.2 조준경 장착
The Pinty Red/Green Dot Sight is designed for standard 20mm Picatinny and Weaver rails.
- Loosen the mounting screw(s) on the sight's base.
- Align the sight's base with the rail on your device.
- 조준경을 원하는 위치가 될 때까지 레일에 밀어 넣으십시오.
- Tighten the mounting screw(s) firmly using the provided hex wrench to secure the sight. Ensure it is stable and does not wobble.

Image: The Red/Green Dot Sight securely mounted on a Picatinny rail.

Image: Key components of the Pinty Red/Green Dot Sight, showing mounting points and adjustment dials.
5. 사용 설명서
5.1 Power On/Off and Reticle Selection
The sight features a rotary dial on the side for power control and reticle selection.
- Rotate the dial to select between red or green reticle illumination.
- Each color typically has multiple brightness settings (e.g., 3 levels for red, 3 for green). Rotate the dial further to increase or decrease brightness.
- To turn off the sight, rotate the dial to the "OFF" position.
추천: Use the red reticle for low-light conditions or night use, and the green reticle for bright daylight conditions for better visibility.
5.2 풍향 및 고도 조정
The sight allows for precise adjustments to ensure accuracy. Adjustments are typically 4 MOA per click.
- 고도 조정: Located on the top of the sight. Remove the protective cap, then use a flathead screwdriver or coin to turn the adjustment screw. Turning clockwise typically moves the point of impact down, and counter-clockwise moves it up.
- 편류 조정: Located on the side of the sight. Remove the protective cap, then use a flathead screwdriver or coin to turn the adjustment screw. Turning clockwise typically moves the point of impact right, and counter-clockwise moves it left.
Perform adjustments incrementally and test after each adjustment until the desired accuracy is achieved.
6. 유지관리
6.1 청소
- 제공된 청소용 천으로 렌즈를 부드럽게 닦아주세요. 연마성 재질이나 독한 화학 약품은 사용하지 마십시오.
- 잘 지워지지 않는 얼룩의 경우, 렌즈에 직접 닿지 않도록 광학 기기용 세척액을 소량 묻혀 천에 바르십시오.
- Keep the sight body clean by wiping it with a soft, damp 옷감.

Image: Illustration of the 5-layer multi-coating on the lenses, designed for optimal light transmission and clear vision.
6.2 보관
- Always use the spring-loaded flip lens covers when the sight is not in use to protect the lenses from dust and debris.
- 조준경은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- 장기간 보관할 경우 누액을 방지하기 위해 배터리를 제거하는 것이 좋습니다.
7. 문제 해결
- Reticle not appearing or dim:
- Check if the sight is turned on.
- Ensure the battery is correctly installed with the positive (+) side facing out.
- Replace the CR2032 battery if it is low or depleted.
- 부식된 배터리 접점을 청소하세요.
- Inaccurate aiming:
- Verify the sight is securely mounted to the rail and not loose.
- 5.2절에 설명된 대로 풍향 및 고도 조정을 수행하십시오.
- Fogging on lenses:
- Allow the sight to acclimate to the ambient temperature.
- Ensure lens caps are properly sealed when not in use.
8. 사양
| 모델 | FAC-RGS-0000-00 |
| 객관적인 조리개 | 30mm (XNUMXmm) |
| 확대 | 1x |
| 분야 View | 50도 |
| 아이 릴리프 | 제한 없는 |
| 레티클 유형 | 4 MOA Dot (Red/Green) |
| 마치다 | 매트블랙 |
| 전원 | 1 x CR2032 배터리(포함) |
| 치수(길이 x 너비 x 높이) | 130 x 65 x 70mm(5.12인치 x 2.56인치 x 2.75인치) |
| 무게 | 278g |
| 레일 호환성 | Standard 20mm Picatinny/Weaver Rails |
| 재료 | 알루미늄, 금속 |
| 내구성 특징 | Weather-resistant, Shock-resistant, Corrosion-resistant, Waterproof, Fogproof |

Image: Durability features of the Pinty Red/Green Dot Sight, including resistance to temperature, corrosion, shock, water, and fog.
9. 보증 및 지원
Pinty products are designed for reliability and performance. For warranty information or technical support, please refer to the official Pinty web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.





