SCULPFUN S9 레이저 조각기 사용 설명서

1. 서론

Welcome to the SCULPFUN S9 Laser Engraver user manual. This document provides essential information for the safe and effective operation of your new laser engraving and cutting machine. The SCULPFUN S9 is designed for precision and versatility, capable of engraving and cutting various materials with its powerful 5.5W laser module.

Please read this manual thoroughly before operating the device to ensure proper setup, safe usage, and optimal performance.

The SCULPFUN S9 Laser Engraver, showcasing 그 디자인과 examples of engraved and cut items.

2. 안전 정보

경고: 레이저 방사선은 눈 손상 및 피부 화상을 유발할 수 있습니다. 항상 안전 수칙을 준수하십시오.

• 눈 보호: The SCULPFUN S9 features a laser filter cover that can filter 98% of ultraviolet light, allowing observation of engraving without safety glasses. However, it is highly recommended to wear additional certified laser safety glasses during operation to ensure maximum protection.
• 비상 정지 : The machine is equipped with a main switch for emergency power off. Familiarize yourself with its location and operation before use.
• 화재 위험: Laser engraving and cutting can generate heat and sparks, posing a fire risk. Always operate the machine in a well-ventilated area, away from flammable materials. The A4-sized steel base can protect your table from laser damage and isolate fire risk.
• 통풍: Ensure adequate ventilation to dissipate fumes and smoke produced during engraving and cutting.
• 감독: 레이저 조각기를 작동시키는 동안에는 절대로 자리를 비우지 마십시오.
• 어린이와 애완동물: Keep children and pets away from the operating area. The laser point can attract attention and cause harm.

The laser module with its protective cover, designed to filter harmful light.

3. 제품 특징

• 90W Effect Ultra-fine Laser Beam: Utilizes the latest 5.5W laser diode technology with an ultra-fine 0.06mm sharp laser focus, providing high penetration depth and precision for both engraving and cutting.
• Fast Focus Design: Features the fastest focusing design. Simply slide the laser module and tighten the screws to achieve focus.
• Robust Full-Metal Structure: The all-metal frame design ensures extreme sturdiness and improves engraving accuracy.
• Integrated Measuring Scales: X and Y axes include precise scale lines for easy measurement of engraved objects.
• 폭넓은 호환성: Compatible with popular engraving software such as LaserGRBL, LightBurn, Benbox, GrblController, and Litefire. Supports PWM mode engraving.
• 운영 체제 지원 : Works with Windows and Mac systems.
• 지원됨 File 형식: JPG, PNG, DXF, SVG, G-Code, NC, BMP, etc.
• 넓은 조각 영역: Offers a generous working area of 410 x 420 mm to meet diverse engraving and cutting requirements.

Illustration of the laser beam shaping technology for ultra-fine engraving.

Demonstration of the SCULPFUN S9's cutting power on wood and acrylic.

Various materials suitable for engraving and cutting with the SCULPFUN S9, including wood, leather, acrylic, steel, and cloth.

4. 패키지 내용

Upon unpacking, please verify that all components are present and undamaged. The standard package for the SCULPFUN S9 Laser Engraver typically includes:

• Laser Engraver Frame Components (X-axis, Y-axis, support legs)
• 레이저 모듈
• 전원 어댑터 및 케이블
• USB 데이터 케이블
• Safety Glasses (recommended for additional protection)
• A4 Steel Backing Plate
• 조립 도구 및 나사
• 사용 설명서 (본 문서)

5. 설정

The SCULPFUN S9 is designed for quick and easy assembly, typically taking 10 to 20 minutes. Follow these general steps for setup:

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내 깨끗하고 평평한 표면에 놓으세요.
2. 프레임 조립: Connect the X and Y axis components to form the rectangular frame. Ensure all connections are secure.
3. 지지 다리 부착: Secure the four support legs to the corners of the frame.
4. 레이저 모듈 설치: Mount the laser module onto the X-axis carriage. Ensure it slides smoothly along the rail.
5. 케이블 연결: Connect the power cable to the machine and a suitable power outlet. Connect the USB data cable from the machine to your computer.
6. Place Steel Plate: Position the A4 steel backing plate under the working area to protect your surface.

Visual guide for the fast assembly process of the SCULPFUN S9.

6. 사용 설명서

Operating the SCULPFUN S9 involves preparing your design, setting up the machine, and initiating the engraving or cutting process through compatible software.

6.1 소프트웨어 설치 및 연결

The SCULPFUN S9 is compatible with various software. It is recommended to use LaserGRBL (free) or LightBurn (paid, highly recommended for advanced features). Download and install your preferred software on your Windows or Mac system.

Once installed, connect the engraver to your computer via the USB cable. The software should detect the device. Refer to the software's specific documentation for detailed connection and setup procedures.

The SCULPFUN S9 supports various software, including LaserGRBL and LightBurn, for broad compatibility.

6.2 레이저 초점 맞추기

Accurate focusing is crucial for optimal engraving and cutting results. The SCULPFUN S9 features a quick-focus design:

1. Place the material you wish to engrave or cut on the working surface.
2. Loosen the screws on the laser module that allow it to slide vertically.
3. Lower the laser module until the focus point (usually a small red dot or crosshair) is sharp and clear on the surface of your material.
4. Tighten the screws to secure the laser module in place.

6.3 Preparing Your Design and Engraving

1. 수입 디자인: Open your chosen software (e.g., LightBurn) and import your design file (JPG, PNG, DXF, SVG, G-Code, NC, BMP).
2. 위치 자료: Place your material on the engraver's bed. Use the precise scale lines on the X and Y axes to accurately position your material and measure its size.
3. 매개변수 설정: Adjust engraving/cutting parameters such as power, speed, and passes within the software based on your material and desired outcome. Refer to online resources or test cuts for recommended settings for different materials.
4. Frame the Job: 소프트웨어의 프레임 기능을 사용하여 미리 설정하세요.view the laser's path and ensure your design fits within the material.
5. 조각/절단 시작: Once satisfied with the setup, initiate the process from the software. Monitor the machine closely during operation.

The large 410x420mm engraving area with integrated measuring rules for precise object placement.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 Laser Engraver.

• 레이저 렌즈 청소: Periodically clean the laser lens with a soft, lint-free cloth and a small amount of isopropyl alcohol. Ensure the machine is off and unplugged before cleaning.
• Inspect and Tighten Screws: Over time, vibrations can loosen screws. Regularly inspect all screws and connections on the frame and laser module, tightening them as needed.
• 레일과 벨트를 청소하세요: Keep the X and Y axis rails and belts free from dust and debris to ensure smooth movement of the laser module.
• 올바르게 보관하세요: 사용하지 않을 때는 조각기를 직사광선과 극한의 온도를 피해 깨끗하고 건조한 곳에 보관하세요.

8. 문제 해결

This section addresses common issues you might encounter with your SCULPFUN S9 Laser Engraver.

9. 사양

• 제품 크기(길이 x 너비 x 높이): 41 x 41 x 42cm
• 제품 무게: 4.67킬로그램
• 모델 참조: CJM-3705-014255-08E0B-1120
• 재료 유형: Silicone Oxide (frame components)
• 전원: 코드식 전기
• 권tage: 12 볼트
• 레이저 출력 전력: 5.5W (90W effect)
• 조각 영역: 410 x 420mm
• 한국어: 860013771195

10. 보증 및 지원

SCULPFUN products are designed for reliability and performance. While specific warranty details are not provided in this manual, SCULPFUN is known for responsive customer service. If you encounter any issues or require technical assistance, please contact SCULPFUN customer support through their official channels or the retailer where you purchased the product.

When contacting support, please have your model number (CJM-3705-014255-08E0B-1120) and a detailed description of the issue ready. Providing photos or videos can also assist in faster resolution.