팀그룹 T-Force Delta RGB DDR5 메모리 모듈 사용 설명서

1. 서론

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your TEAMGROUP T-Force Delta RGB DDR5 32GB (2x16GB) 6400MHz Desktop Memory Module. This high-performance DDR5 memory kit is designed to deliver enhanced speed and stability for compatible systems, featuring vibrant RGB lighting and support for Intel XMP3.0 for optimized performance. It is compatible with Intel 600 Series Chipsets and newer platforms supporting DDR5 memory.

This image displays two individual TEAMGROUP T-Force Delta RGB DDR5 memory modules. Each module features a black heat spreader with the T-Force logo and 'DELTA' branding, accented by a translucent top bar that illuminates with RGB lighting.

2. 설정 및 설치

Proper installation of your memory modules is crucial for system stability and performance. Please follow these steps carefully:

1. 준비: Before beginning, ensure your computer is powered off and unplugged from the wall outlet. Discharge any static electricity by touching a grounded metal object, such as the computer case.
2. 열린 사건: 컴퓨터 케이스를 열어 마더보드에 접근하세요.
3. DIMM 슬롯 찾기: Identify the DDR5 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory (typically slots 2 and 4, or 1 and 3, counting from the CPU).
4. 고정 클립을 엽니다. Gently push open the white or black retention clips at both ends of the selected DIMM slots.
5. 메모리 모듈 삽입: Align the notch on the bottom edge of the memory module with the key in the DIMM slot. Apply even pressure to both ends of the module until it clicks into place and the retention clips automatically close. Do not force the module if it does not fit; recheck the alignment.
6. 설치 확인: Ensure both retention clips are fully closed and the module is seated firmly and evenly in the slot.
7. Repeat for Second Module: Install the second memory module into the corresponding dual-channel slot following the same procedure.
8. 케이스를 닫고 전원을 켜세요: 컴퓨터 케이스를 닫고 전원 케이블을 연결한 후 시스템의 전원을 켭니다.

This image shows a single TEAMGROUP T-Force Delta RGB DDR5 memory module securely installed in a motherboard's DIMM slot. The module's translucent top bar is illuminated with a gradient of blue and purple RGB lighting, highlighting its aesthetic design.

3. 작동 및 구성

3.1 Enabling XMP3.0

To achieve the rated 6400MHz speed, you must enable Intel XMP3.0 (Extreme Memory Profile) in your motherboard's BIOS/UEFI settings. This is a one-click overclocking feature that configures the memory to its optimal speed and timings.

1. BIOS/UEFI에 접속하세요: Restart your computer and repeatedly press the designated key (usually Del, F2, F10, or F12) during startup to enter the BIOS/UEFI setup.
2. XMP 설정 찾기: Navigate to the 'Overclocking', 'Memory Settings', or 'AI Tweaker' section. Look for an option labeled 'XMP', 'DOCP', or 'EXPO' (for AMD platforms, though this module is optimized for Intel).
3. Pro 활성화file: Select the XMP3.0 profile (often labeled 'Profile 1' or similar) and enable it.
4. 저장 및 종료: Save the changes and exit the BIOS/UEFI. Your system will restart with the memory running at its advertised speed.

3.2 RGB 조명 제어

The T-Force Delta RGB DDR5 modules feature 120-degree ultra-wide RGB lighting. You can customize the lighting effects using your motherboard's RGB synchronization software.

• Install the appropriate RGB software for your motherboard (e.g., ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync).
• Launch the software and select the memory modules to customize their lighting patterns, colors, and synchronization with other RGB components in your system.

This image illustrates the compatibility of the memory modules with popular motherboard RGB synchronization software, allowing users to control and customize the lighting effects across their system. Supported software includes ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion, and MSI Mystic Light Sync.

This image features four TEAMGROUP T-Force Delta RGB DDR5 memory modules installed side-by-side in a motherboard. The modules' RGB lighting cycles through a rainbow spectrum, showcasing the wide range of customizable lighting effects.

4. 유지관리

TEAMGROUP T-Force Delta RGB DDR5 memory modules are designed for durability and reliability. Minimal maintenance is required.

• 깨끗하게 유지하십시오: 메모리 모듈과 기타 구성품에 먼지가 쌓이지 않도록 컴퓨터 내부를 주기적으로 청소하세요. 압축 공기를 사용하여 먼지를 부드럽게 제거하세요.
• 공기 흐름 확보: Maintain good airflow within your computer case to help dissipate heat from the memory modules, especially during prolonged high-performance operation.
• 물리적 손상 방지: Handle memory modules by their edges to avoid touching the gold contacts or integrated circuits. Store unused modules in anti-static bags.

5. 문제 해결

If you encounter issues with your memory modules, consider the following troubleshooting steps:

• 시스템이 부팅되지 않음/화면이 표시되지 않음:
  • Ensure the memory modules are fully seated in their DIMM slots. Re-seat them by gently pushing down until the clips lock.
  • Verify that the modules are installed in the correct slots for dual-channel operation as specified by your motherboard manual.
  • If using multiple modules, try booting with only one module at a time to identify a potentially faulty stick or slot.
• 잘못된 메모리 속도가 감지되었습니다:
  • Access your BIOS/UEFI settings and confirm that Intel XMP3.0 is enabled. If not, enable it and save changes.
  • Ensure your motherboard BIOS/UEFI is updated to the latest version, as this can improve memory compatibility and stability.
• 시스템 불안정/충돌:
  • If XMP is enabled, try disabling it to see if the system stabilizes. This can help determine if the issue is related to the overclocked profile 또는 다른 구성 요소.
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic, MemTest86) to check for errors in the memory modules.
• RGB Lighting Not Working/Synchronizing:
  • Ensure the motherboard's RGB software is correctly installed and up-to-date.
  • 다른 RGB 제어 소프트웨어와 충돌이 있는지 확인하세요.
  • Verify that the RGB headers on the motherboard are properly connected (though these modules typically draw power and RGB control directly from the DIMM slot).

6. 사양

7. 보증 및 지원

TEAMGROUP products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official TEAMGROUP web사이트 또는 구매 시 포함된 문서를 참조하세요.

7.1 기술 지원

For technical assistance, troubleshooting, or product inquiries, please visit the official TEAMGROUP support channels:

• 공식 브랜드 스토어: Visit the TEAMGROUP Store on Amazon
• 사용자 가이드(PDF): 사용자 가이드 다운로드(PDF)
• For additional support, please visit the TEAMGROUP official website and navigate to their support section.