소개
Thank you for choosing the YABER 4000A Portable Car Battery Jump Starter, Model YR200. This device is designed to provide a reliable and convenient solution for jump-starting 12V vehicles, serving as a portable power bank, and offering emergency lighting. With a powerful 4000A peak current, it can start vehicles with up to 7.0L gas or 5.5L diesel engines. Its compact, lightweight, and robust design, coupled with IP66 waterproof rating, ensures durability and ease of use in various conditions.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your YABER Jump Starter. Please read it thoroughly before first use and keep it for future reference.
Image: The YABER 4000A Portable Car Battery Jump Starter, showcasing its compact design and included smart jumper cables.
패키지 내용
패키지를 열 때 모든 품목이 들어 있고 상태가 양호한지 확인하세요.
- YABER Car Jumper Battery Pack (YR200)
- 스마트 점퍼 케이블
- USB 충전 케이블
- 사용 설명서 (본 문서)
안전 정보
부상이나 기기 및 차량 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.
- Do not use the jump starter if the smart clamp또는 케이블이 손상되었습니다.
- 올바른 극성 연결을 확인하십시오 (빨간색 클립).amp 포지티브, 블랙 clamp to negative) to avoid short circuits.
- 얼어붙은 배터리를 점프 스타트하려고 하지 마세요.
- 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
- 제품을 분해하지 마십시오. 서비스는 자격을 갖춘 담당자만 수행해야 합니다.
- Avoid exposing the device to extreme temperatures outside the recommended operating range (-4°F to 140°F).
- The smart safety technology provides multiple protections including short circuit, overheat, reverse polarity, over-voltage, and overload protection. Always heed warning signals.
Image: Visual representation of the YABER jump starter's safety features, including protection against short circuit, overcharge, over-discharge, reverse polarity, reverse charge, overcurrent, reverse connection, and high temperature.
설정 및 충전
초기 요금
Before first use, fully charge your YABER Jump Starter. While a charger/adapter is not included, it is compatible with any universal USB charger, such as your phone charger.
- Connect the provided USB charging cable to the jump starter's charging port.
- Connect the other end of the USB cable to a compatible USB power adapter (e.g., 5V/2A phone charger) or a USB port on a computer.
- The indicator lights on the jump starter will illuminate to show charging progress. All lights will be solid when fully charged.
배터리 수준 확인
Press the power button briefly to check the current battery level indicated by the LED lights.
작동 지침
점프 스타트 차량
차량 시동을 걸려면 다음 단계를 주의 깊게 따르십시오.
- Step 1: Insert Smart Clamp 플러그. 스마트 CL의 플러그를 삽입하십시오.amp completely into the jump starter's port. The indicator lights on the smart clamp will flash red and green alternately, indicating it's ready.
- Step 2: Connect to Car Battery. 빨간색 클립을 올바르게 클립하세요amp to the positive (+) electrode of the car battery and the black clamp to the negative (-) electrode. The indicator lights will continue to flash red and green alternately, and you may hear a relay closing sound.
- 3단계: 엔진을 시동하십시오. Once connected, start your vehicle's engine. If the engine does not start on the first attempt, disconnect the smart clamps from the car battery, wait for at least 30 seconds, and then try again.
- 4단계: Cl 제거amps. 차량 시동이 걸리자마자 점퍼 케이블을 제거하십시오.amp자동차 배터리에서 30초 이내에 방전됩니다.
Image: A visual guide demonstrating the four steps to jump-start an engine: inserting the smart clip, connecting to the battery, starting the car, and removing the clamps.
Video: An official demonstration of the YABER YR200 Car Battery Jump Starter in action, showing its features and ease of use for jump-starting vehicles.
파워 뱅크로 사용
The YR200 features a 12000mAh capacity, allowing it to charge various electronic devices.
- Connect your phone, tablet, camera, or other USB-powered device to the USB output port(s) of the jump starter using your device's charging cable.
- 점프 스타터가 자동으로 기기 충전을 시작합니다.
Image: The YABER jump starter functioning as a 12000mAh power bank, charging a smartphone and a tablet simultaneously.
LED 손전등 모드
The YR200 is equipped with a versatile LED flashlight for emergency situations or general illumination.
- Press and hold the power button for a few seconds to turn on the flashlight (Illumination mode).
- Press the power button again to cycle through the modes:
- 구조 요청 모드: Emits a Morse code SOS signal.
- 스트로브 모드: Emits a rapid flashing light.
- 손전등을 끄려면 전원 버튼을 다시 길게 누르세요.
Image: A person utilizing the YABER jump starter's built-in LED flashlight to illuminate an engine bay, demonstrating its utility in low-light conditions. The image also highlights the three available light modes: Illumination, SOS, and Strobe.
유지
- 충전재: It is recommended to charge the product every 3 months, even if not in use, to prolong its lifespan and ensure it's ready when needed.
- 저장: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The optimal operating and storage temperature range is from -4°F to 140°F (-20°C to 60°C).
- 청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 강한 화학 물질이나 연마성 세척제는 사용하지 마세요.
- 방수 기능: The device is IP66 waterproof, meaning it is protected against powerful water jets and dust. Ensure all port covers are securely closed to maintain water resistance.
Image: The YABER jump starter undergoing water and dust resistance tests, confirming its IP66 rating when caps are closed.
문제 해결
If you encounter issues with your YABER Jump Starter, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 점프 스타터가 켜지지 않습니다. | 배터리가 소진되었습니다. | 점프 스타터를 완전히 충전하세요. |
| 연결 후 차량이 시동되지 않습니다. | 잘못된 clamp 연결(역극성). 차량 배터리가 심각하게 손상되었습니다. Jump starter not fully charged. | CL을 확인amps are connected correctly (red to positive, black to negative). The smart clamp will indicate errors. 전문 정비사와 상담하세요. 사용하기 전에 점프 스타터가 완전히 충전되었는지 확인하십시오. |
| 스마트 CLamp indicator lights are not flashing. | 스마트 CLamp not fully inserted into the jump starter. Damaged smart clamp. | 스마트 클라를 확보하세요amp plug is fully inserted. 교체를 위해 고객지원팀에 문의하세요. |
| 사용 중에 기기가 뜨거워집니다. | 고전류 방전 중 정상 작동. 과부하 또는 단락. | This is normal. If excessively hot, disconnect and allow to cool. The smart protection system should prevent damage. Check connections and vehicle battery condition. |
If the problem persists after attempting these solutions, please contact YABER customer support.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 야 베르 |
| 모델 | YR200 |
| 피크 출력 전류 | 4000 Amps |
| 배터리 용량 | 12000mAh |
| 시작 권tage | 12V |
| 엔진 호환성 | 최대 7.0L 가솔린 / 5.5L 디젤 |
| 제품 크기(D x W x H) | 3.35인치 x 5.52인치 x 1.06인치 |
| 품목 무게 | 0.72파운드(약 11.5온스) |
| 방수 등급 | IP66 |
| 작동 / 보관 온도 | -4°F ~ 140°F(-20°C ~ 60°C) |
| 특별 기능 | 3 LED Light Modes (Flashlight, SOS, Strobe), Smart Safety Jumper Cables, Portable Power Bank Function |
보증 및 지원
YABER provides comprehensive support for your product:
- 보증: 2년 무상 보증.
- 기술 지원: 평생 기술 지원.
- 고객 서비스: 연중무휴 7시간 고객 서비스.
For any assistance, questions, or concerns, please contact YABER customer support via email. Contact information can typically be found on the product packaging or the official YABER web대지.
