1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your C-LOGIC Programmable Digital Thermostat. Please read this manual thoroughly before installation and use to ensure proper function and safety. This thermostat is designed for wall installation and 2-wire connection to heating systems.
2. 안전 정보
- 설치는 자격을 갖춘 전기 기술자 또는 난방 기술자가 수행해야 합니다.
- Always disconnect power to the heating system at the main circuit breaker before installation or maintenance.
- 온도 조절 장치를 물이나 과도한 습기에 노출시키지 마십시오.
- Ensure correct wiring connections to prevent damage to the thermostat or heating system.
- This device requires 2 AA batteries (not included) for operation. Do not mix old and new batteries, or different types of batteries.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- C-LOGIC Digital Thermostat Unit
- 벽면 플러그 (2개)
- 장착 나사(2x)
- 사용 설명서 (본 문서)
Image: Contents of the C-LOGIC thermostat package, showing the thermostat unit, mounting hardware, and a manual icon.
4. 제품 오버view
4.1. 앞면 View 및 디스플레이
이미지: 앞면 view of the C-LOGIC thermostat. The backlit LCD displays the set temperature, current room temperature, time, and an active heating icon. A rotary knob is located at the bottom center.
The thermostat features a clear, backlit LCD screen that displays:
- SET Temperature: 원하는 온도.
- ROOM Temperature: The current ambient temperature.
- 시간: 현재 시간.
- 난방/냉방 표시기: An icon indicating active heating or cooling (if configured for cooling).
- 프로그램 표시기: Shows the active program number.
4.2. 컨트롤
이미지: 측면 view of the C-LOGIC thermostat, highlighting the ON/OFF switch located on the right side.
- 회전식 손잡이: Used to adjust temperature settings and navigate menus. Pressing the knob typically confirms selections.
- 온 / 오프 스위치: Located on the side of the unit to power the thermostat on or off.
4.3. 치수
Image: A technical drawing illustrating the dimensions of the thermostat: 86 mm (width) x 86 mm (height) x 29 mm (depth).
5. 설치
5.1. 온도 조절 장치 장착
The thermostat is designed for wall mounting. Choose a location away from direct sunlight, drafts, and heat sources for accurate temperature readings.
- 온도 조절기의 앞면 패널과 뒷면 패널을 조심스럽게 분리하세요.
- Position the back plate on the wall at the desired height.
- Mark the drilling points through the mounting holes on the back plate.
- Drill holes (typically 5mm diameter) at the marked points and insert the provided wall plugs.
- 제공된 나사를 사용하여 뒷판을 벽에 고정하십시오.
5.2. 배선 연결
This thermostat is compatible with 2-wire heating systems (e.g., gas, diesel, pellet boilers). It connects to the COM (Common) and NO (Normally Open) terminals of your heating system. Maximum current capacity is 5A.
Image: Installation guide showing recommended drill bit sizes (5mm for plugs, 3mm for screws) and wiring diagrams for both heating and cooling units. The heating connection uses COM and NO terminals.
Image: Detailed wiring diagram. NC (Normally Closed contact), COM (Common terminal), and NO (Normally Open contact) are labeled. The heating connection uses COM and NO.
- 중요한: Ensure power to your heating system is OFF before proceeding.
- Connect the two wires from your heating system to the 코. 그리고 아니요 terminals on the thermostat's back plate.
- If your system supports cooling, you would typically use COM and NC (Normally Closed) terminals, but this thermostat is primarily designed for heating applications.
- Once wiring is complete, carefully reattach the front panel of the thermostat to the back plate.
5.3. 배터리 설치
The thermostat requires 2 AA batteries for operation.
이미지: 뒤로 view of the thermostat with the battery cover removed, revealing the battery compartment designed for two AA batteries.
- Open the battery compartment cover on the back of the thermostat.
- 올바른 극성(+/-)을 확인하여 새 AA 배터리 2개를 삽입합니다.
- 배터리 덮개를 단단히 닫으세요.
- Turn on the thermostat using the ON/OFF switch on the side.
6. 기본 동작
6.1. 전원 켜기/끄기
Use the ON/OFF switch located on the side of the thermostat to power the unit on or off.
6.2. 온도 조절
When the thermostat is on, rotate the knob to adjust the desired SET temperature. The display will show the new set temperature. The thermostat will automatically activate the heating system if the room temperature falls below the set temperature.
6.3. 디스플레이 정보
The backlit LCD screen continuously displays the current room temperature, the set temperature, and the current time. A flame icon indicates when the heating system is active.
7. 프로그래밍
The thermostat offers programmable features to manage comfort and economy temperatures throughout the day. It includes 3 programs: 2 fixed and 1 configurable.
7.1. 시간 및 날짜 설정
Before programming, ensure the current time and day are correctly set. Refer to the specific instructions in your full manual for detailed steps on setting the clock.
7.2. Fixed Programs
The thermostat comes with two pre-set fixed programs. Details of these programs are typically outlined in the full product manual. These programs offer standard comfort and economy settings for common daily routines.
7.3. Configurable Program (Hour by Hour)
The configurable program allows you to set specific comfort or economy temperatures for each hour of the day, adapting to your personal schedule.
- Access the programming mode (refer to your full manual for button sequences).
- Select the configurable program option.
- For each hour, use the rotary knob to select either 'Comfort' or 'Economy' temperature.
- Confirm each hour's setting.
- Save the program settings.
메모: Detailed instructions for entering programming mode, setting specific temperatures for comfort/economy, and saving programs are found in the comprehensive manual provided with the product.
8. 유지관리
- 청소: 부드럽고 마른 천으로 온도 조절기를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 배터리 교체: Replace batteries when the low battery indicator appears on the display. Always replace both AA batteries simultaneously.
- 장애물을 피하십시오: Ensure no objects block the thermostat's vents or sensors, as this can affect temperature accuracy.
9. 문제 해결
- 온도 조절기가 켜지지 않음: Check battery installation and ensure the ON/OFF switch is in the 'ON' position. Replace batteries if necessary.
- 난방 시스템이 응답하지 않습니다. Verify wiring connections (COM and NO). Ensure the thermostat is set to a temperature higher than the current room temperature. Check the heating system's power supply.
- 온도 측정 오류: 온도 조절 장치가 직사광선, 통풍구 또는 열원에 노출되지 않도록 하세요.
- 프로그래밍상의 어려움: Refer to the detailed programming section in your full product manual. Ensure the time and day are set correctly.
10. 기술 사양
| 특징 | 사양 |
|---|---|
| 상표 | 씨로직 |
| 모델 번호 | 8435394776767 |
| 색상 | 하얀색 |
| 치수(길이 x 너비 x 높이) | 8.6 x 8.6 x 2.9cm |
| 무게 | 170그램 |
| 전원 | AA 배터리 2개(포함되지 않음) |
| 권tage | 24볼트(AC) |
| 재료 | 플라스틱, 금속 |
| 연결 기술 | 유선(2선 연결) |
| 온도 제어 유형 | 프로그래밍 가능 |
| 특정 용도 | Heating (Gas, Diesel, Pellet boilers, etc.) |
| Max Current Capacity | 5A |
11. 보증 및 지원
보증 정보 및 기술 지원에 대해서는 구매 시 제공된 설명서를 참조하거나 판매점에 문의하십시오. 구매 영수증은 구매 증빙 자료로 보관하십시오.
