제품 끝view
The ANSMANN AES4 Timer Switch is a digital weekly timer designed to automate the switching of electrical devices. It features a clear LCD display, 10 programmable switching times, a random function for simulating presence, and a summer time adjustment feature. This device helps in managing energy consumption and enhancing home security.
그림 1: 앞쪽 view of the ANSMANN AES4 Timer Switch, showing the LCD display and control buttons.
설정 및 초기 구성
Before first use, ensure the timer switch is fully charged by plugging it into a live socket for at least 30 minutes. This will activate the internal battery for memory retention.
1. 장치 재설정
To clear all previous settings and ensure a fresh start, locate the small 다시 놓기 button (usually recessed) and press it with a pointed object (e.g., a pen tip). The display will show all segments, then reset to 00:00.
2. 현재 시간 및 요일 설정
- 를 누르세요 시계 버튼을 한 번 누르세요. 디스플레이에 현재 시간이 표시됩니다.
- 를 누르세요 주 버튼을 반복해서 눌러 현재 요일(월, 화, 수, 목, 금, 토, 일)을 설정하세요.
- 를 누르세요 시간 버튼을 반복해서 눌러 현재 시간(0~23)을 설정하세요.
- 를 누르세요 분 버튼을 반복해서 눌러 현재 분(0~59)을 설정하세요.
- To exit time setting mode, press any other button or wait approximately 30 seconds for the device to return to normal display.
그림 2: Close-up of the LCD display, illustrating the day and time setting interface. Note the "SUMMER" indicator for summer time function.
3. 12/24 Hour Display Selection
일반 시계 모드에서 버튼을 누르세요. 시계 버튼을 누른 다음 시간제 노동자 button simultaneously to toggle between 12-hour (with AM/PM indicator) and 24-hour display formats.
4. Summer Time Function
To activate or deactivate the summer time (Daylight Saving Time) function, press the 시계 버튼을 누른 다음 켜짐/자동/꺼짐 button simultaneously. The display will show "SUMMER" when activated, and the time will advance by one hour.
작동 지침
The AES4 Timer Switch allows for up to 10 ON/OFF programs per day or week, along with manual control and a random function.
1. ON/OFF 시간 프로그래밍
- 를 누르세요 시간제 노동자 button. The display will show "1 ON". This is the first ON program.
- 사용 주, 시간, 그리고 분 buttons to set the desired ON time and day(s) for this program. You can select specific days, weekdays, weekends, or all days.
- 를 누르세요 시간제 노동자 button again. The display will show "1 OFF". This is the first OFF program.
- 사용 주, 시간, 그리고 분 buttons to set the desired OFF time and day(s) for this program.
- Repeat steps 1-4 for up to 10 ON/OFF programs. Pressing 시간제 노동자 will cycle through P1 ON, P1 OFF, P2 ON, P2 OFF, ..., P10 ON, P10 OFF.
- 프로그래밍 모드를 종료하려면 시계 버튼을 누르거나 30초 동안 기다리세요.
그림 3: Example of the timer switch being used to automate Christmas lighting, turning lights on from 17:00 to 08:00.
그림 4: The timer switch automating aquarium lighting, ensuring fish have a regular light cycle, for examp르, 08:00부터 20:00까지.
2. 수동 켜짐/자동/꺼짐 모드
를 누르세요 켜짐/자동/꺼짐 작동 모드를 순환하는 버튼:
- 에: The connected device is continuously ON, overriding all programs.
- 자동 : The connected device operates according to the programmed ON/OFF times. This is the standard operating mode for automated control.
- OFF : The connected device is continuously OFF, overriding all programs.
3. 랜덤 기능
The random function is designed to simulate presence in your home by randomly switching the connected device ON and OFF within a specific time window (e.g., 18:00 to 06:00). This can deter potential intruders.
To activate the random function, press the 무작위의 button. "RANDOM" will appear on the display. Press it again to deactivate.
그림 5: The timer switch utilizing its random mode to simulate occupancy, enhancing home security by randomly turning lights on and off.
유지
The ANSMANN AES4 Timer Switch requires minimal maintenance.
- 청소: 부드럽고 마른 천으로 기기를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오. 청소하기 전에 기기의 전원 플러그를 뽑으십시오.
- 저장: If storing the device for an extended period, ensure it is unplugged and kept in a dry, cool place.
- 배터리: The internal battery is designed for memory retention during power outages. It is not user-replaceable.
문제 해결
If you encounter issues with your ANSMANN AES4 Timer Switch, try the following steps:
- 화면이 비어 있거나 응답하지 않습니다. Ensure the timer is plugged into a live power outlet. If it has been unplugged for a long time, the internal battery might be depleted. Plug it in for at least 30 minutes to charge.
- 프로그램이 실행되지 않습니다.
- Check if the timer is in "AUTO" mode. If it's in "ON" or "OFF" mode, programs will be overridden.
- 현재 시간과 날짜가 올바르게 설정되어 있는지 확인하십시오.
- Review your programmed ON/OFF times to ensure they are set as intended and do not conflict.
- Device connected to timer is not turning ON/OFF:
- Ensure the connected device is properly plugged into the timer switch.
- Check if the connected device itself is working by plugging it directly into a wall socket.
- Ensure the timer switch is receiving power.
- 무작위 함수가 작동하지 않습니다: Ensure the "RANDOM" indicator is visible on the display.
- 일반적인 오작동: Perform a full reset of the device by pressing the recessed 다시 놓기 button. Note that this will erase all programmed settings.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 1260-0006 |
| 제품 치수 | 2.36 x 2.35 x 5.31 인치 |
| 품목 무게 | 5.4온스(153그램) |
| 화면 크기 | 2.1 인치 |
| 최대 전력 등급 | 3680 W (as per product title/description) |
| 전환 시간 | Up to 10 ON/OFF programs per day/week |
| 기능 | Digital Timer, Random Function, Summer Time, 12/24-hour display |
보증 및 지원
For detailed warranty information and technical support, please refer to the official Ansmann web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
Official Ansmann Web대지: www.ansmann.de
