소개
Thank you for choosing the EMOS ESW5002 Wireless Weather Station. This device provides real-time indoor and outdoor weather data, including temperature, humidity, air pressure, heat index, comfort index, and a 12-24 hour weather forecast. This manual will guide you through the setup, operation, and maintenance of your new weather station to ensure optimal performance.
패키지 내용
모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.
- 1x Wireless Color Display Main Unit
- 1x Wireless Thermo-Hygro Outdoor Sensor
- 1x Power Adapter for Main Unit
- 1x 사용자 설명서
Image: All components included in the EMOS ESW5002 weather station package.
제품 끝view
메인 디스플레이 유닛
The main display unit features a clear color LCD screen that shows all weather data, time, and date. It can be powered by the included AC adapter or backup batteries (not included).
이미지: 앞면 view of the EMOS ESW5002 main display unit with labeled sections for outdoor metrics, weather forecast, indoor metrics, pressure, heat index, moon phase, date, and time.
이미지: 후면 view of the main display unit, highlighting AC power input, backup battery compartment, and various control buttons.
실외 센서
The wireless outdoor sensor measures external temperature and humidity. It is water-resistant (IPX4) and operates on 2x AA batteries (not included), offering approximately 10 months of battery life.
Image: The water-resistant outdoor sensor with its specifications and battery requirements.
설정
1. 메인 유닛 전원 공급
- Connect the provided AC power adapter to the main unit and plug it into a power outlet.
- For backup power, insert 3x AAA batteries (not included) into the battery compartment on the back of the main unit. This ensures continuous operation during power outag에스.
2. 실외 센서 전원 공급
- Open the battery compartment on the outdoor sensor.
- AA 건전지 2개(별도 구매)를 넣을 때, +/- 극성을 반드시 확인하세요.
- 방수 기능을 유지하려면 배터리함을 단단히 닫으십시오.
3. 센서 페어링
The main unit and outdoor sensor should automatically pair within a few minutes after both are powered on. If pairing does not occur, press the 'SENSOR' button on the back of the main unit to initiate a manual search.
4. 센서 배치
Place the outdoor sensor in a shaded area, protected from direct sunlight and rain, to ensure accurate temperature and humidity readings. The sensor has a wireless range of up to 100 meters (unobstructed).
이미지: 전ample placement of the main unit indoors and the outdoor sensor outside for accurate readings.
Image: The weather station supports connecting up to eight additional sensors (sold separately) for monitoring different areas.
작동 지침
디스플레이 기능
컬러 디스플레이는 포괄적인 개요를 제공합니다.view 현재 날씨 상황 및 시간 정보:
- 실외 측정 항목: Temperature, Humidity, and Alert indicators.
- 24h Weather Forecast: Graphical representation of upcoming weather.
- 실내 측정 지표: Temperature, Humidity, and Alert indicators.
- 압력: Current air pressure reading.
- Heat Index & Moon Phase: Calculated heat index and current moon phase.
- 날짜 및 시간: 현재 날짜 및 시간입니다.
Button Functions (Rear Panel)
| 단추 | 기능 |
|---|---|
| 시간 설정 | Enter time/date setting mode. |
| 경보 | 설정 또는 view 알람 시간. |
| 알리다 | 설정 또는 view temperature/humidity alerts. |
| 알람/스누즈 | Activate snooze during alarm, or turn off alarm. |
| 채널/+ | Switch outdoor sensor channels or increase value during settings. |
| 메모리/- | View MIN/MAX records or decrease value during settings. |
| 색인 | Toggle between different display indices (e.g., Heat Index, Dew Point). |
| 역사 | View 역사적 데이터. |
| 감지기 | Manually search for outdoor sensor signal. |
| 바로 | Switch between absolute and relative air pressure. |
| ° C / ° F | Toggle temperature units between Celsius and Fahrenheit. |
| 다시 놓기 | Factory reset (use a pointed object). |
시간 및 날짜 설정
- Press and hold the 'TIME SET' button.
- Use the 'CHANNEL/+' and 'MEM/-' buttons to adjust values.
- Press 'TIME SET' again to confirm and move to the next setting (e.g., 12/24 hour format, hour, minute, year, month, day).
알림 사용자 지정
You can set high and low alerts for indoor and outdoor temperature and humidity.
- Press the 'ALERT' button to cycle through alert settings.
- When the desired alert (e.g., Outdoor Temp High) is displayed, press and hold 'ALERT' to enter setting mode.
- Use 'CHANNEL/+' and 'MEM/-' to adjust the alert value.
- Press 'ALERT' to confirm and move to the next setting.
유지
- 청소: 디스플레이 장치와 센서를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 배터리 교체: Replace batteries in the outdoor sensor when the low battery indicator appears on the main unit. Replace backup batteries in the main unit annually or as needed.
- 센서 배치: Periodically check the outdoor sensor's placement to ensure it remains protected from direct elements and maintains optimal signal strength.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 실외 데이터가 표시되지 않습니다. | 센서가 페어링되지 않았거나 범위를 벗어났습니다. 센서 배터리가 부족합니다. | Press 'SENSOR' button to re-pair. Move sensor closer. Replace sensor batteries. |
| 온도/습도 측정값이 잘못되었습니다. | Sensor exposed to direct sunlight/rain; interference. | Relocate sensor to a shaded, protected area. Ensure no large metal objects or electronics are nearby. |
| 디스플레이가 어둡거나 아무것도 표시되지 않습니다. | AC adapter not connected; low backup batteries. | Ensure AC adapter is securely plugged in. Replace backup batteries. |
| 시간/날짜가 올바르지 않습니다. | Manual setting required after power loss. | Follow 'Setting Time and Date' instructions. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | ESW5002 |
| 치수(길이 x 너비 x 높이) | 21.5 x 15 x 10cm |
| 무게 | 809그램 |
| 디스플레이 유형 | 컬러 LCD |
| 전원(주 장치) | AC Adapter (included), 3x AAA Batteries (backup, not included) |
| 전원(실외 센서) | 2x AA 배터리(포함되지 않음) |
| 연결 기술 | 무선 주파수(433MHz) |
| 특별 기능 | Customizable Alerts, Weather Forecast, Temperature/Humidity Monitoring, Radio-controlled System, Color Screen |
| 재료 | 금속 |
보증 및 지원
EMOS products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided on the EMOS official web웹사이트 또는 구매 서류를 참조하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
