소개
This manual provides detailed instructions for setting up, operating, and maintaining your RAINPOINT WiFi Automatic Watering System. This innovative system is designed to provide automated and remote-controlled watering for your indoor potted plants, ensuring they receive optimal hydration even when you are busy or away on vacation.
상자 안에는 무엇이 들어 있나요?
패키지에 모든 구성품이 들어 있는지 확인하세요.
- 선물 패키지
- USB 케이블 x 1
- 10m (32.8Ft) Tubing x 1
- Tubing End Caps x 3
- Detachable Hook x 1
- 필터 x 1
- Check Valve x 1
- T Barb Fitting x 10
- Straight Barb Fitting x 3
- Micro Drip Emitters x 10
Image: All components included in the RAINPOINT WiFi Automatic Watering System kit.
설정
시스템 오버view
이미지: 이상view of the RAINPOINT system setup, including the device, water reservoir, and drip lines to plants.
장치 전원 공급
The system supports two power modes: battery (4x AAA, not included) or USB cable. It is recommended to keep the USB cable powered for continuous operation and to ensure the schedule runs during power outag에스.
Image: The device can be powered via USB cable or 4 AAA batteries (not included).
Wi-Fi 연결
Important: Only connect with 2.4GHz WiFi. For dual-band routers, independently enable the 2.4GHz WiFi band and name it differently from the 5GHz WiFi band. Ensure the USB cable is powered on before pairing WiFi.
Image: The device requires a 2.4GHz Wi-Fi connection.
To connect your mobile device to the watering system:
- Open the RainPoint APP and tap "Add Device".
- Select "Wi-Fi Water Timer with Pump" from the device list.
- 2.4GHz Wi-Fi 네트워크 이름과 비밀번호를 입력하세요.
- Connect the device with a data cable to establish pairing.
- Turn on the power and hold down the Wi-Fi button for 3-5 seconds until the indicator flashes quickly, once per second.
- 앱에서 표시등이 빠르게 깜빡이는지 확인하세요.
- Ensure the device is powered on during the adding process.
- 기기가 성공적으로 추가되면 앱에 해당 기기가 표시됩니다.
Image: Steps for connecting the device to the mobile application.
Image: Continuation of the Wi-Fi pairing process in the app.
Drip Irrigation Setup
Follow these steps to set up the drip irrigation system for your plants:
- Measure the required tubing length for each plant.
- Cut the tubing to the measured lengths.
- Attach the tubing with T-Joints for branching.
- Attach the tubing with the dripper at the plant's base.
- Install a filter at the end of the water inlet pipe to prevent blockages.
- Install the check valve at the outlet pipe near the pump to prevent backflow.
- Hook the device to your water tank (e.g., a bucket).
- Insert the dripper into the soil near the plant's roots.
Image: Guidelines for optimal pump and plant placement for effective watering.
작동 지침
앱을 통한 원격 제어
The RainPoint APP allows you to remotely manage multiple watering plans. Notifications will be sent to the APP when "Automatic" watering plans are active or if the pump runs out of water. This feature is ideal for plant care when you are busy or on vacation.
Image: Real-time notifications from the RainPoint app.
Image: The system ensures plants are watered even when you are away.
물주기 모드
The system offers flexible watering modes:
- 자동 모드: Customize irrigation plans based on local weather, temperature, humidity, sunrise/sunset, or specific days of the week.
- 시간 제한 모드: Set watering duration from 20 seconds to 30 minutes, and watering frequency from 1 hour to 24 hours, or from 1 day to 7 days.
- 수동 급수: Initiate watering on demand.
- Delayed Watering: Postpone scheduled watering if needed.
Image: Adjustable settings for watering frequency and duration.
Image: Smart weather-based watering and rain delay functions.
Family Co-Management
The RainPoint APP allows you to add multiple family members, enabling co-management of the watering system. This prevents accidental repeat watering and ensures consistent plant care.
Image: Family access to one device for shared control.
유지
물 공급원
Ensure the water reservoir always has sufficient water. The system will send notifications if the pump runs out of water.
필터 청소
Regularly check and clean the filter at the end of the water inlet pipe to prevent impurities from blocking the system.
Tubing and Emitters
Periodically inspect the tubing and micro drip emitters for any clogs or damage. Clean or replace as necessary to ensure consistent water flow.
Image: Key components for system maintenance and longevity.
문제 해결
물 흐름 없음
- Check if the water reservoir is empty. Refill if necessary.
- Ensure the pump is powered on and connected.
- Inspect the filter for clogs and clean it.
- Check tubing for kinks or blockages.
Wi-Fi 연결 문제
- Wi-Fi 네트워크가 2.4GHz인지 확인하세요.
- 기기가 Wi-Fi 라우터의 범위 내에 있는지 확인하십시오.
- Restart the device and attempt to reconnect via the app.
- Confirm the USB cable is powered on during pairing.
Inconsistent Watering
- Check for air bubbles in the tubing.
- 모든 연결 부분이 안전하고 누수가 없는지 확인하세요.
- Verify drippers are not clogged.
- Review your watering schedule settings in the app.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | IK10PW |
| 재료 | 플라스틱 |
| 전원 | Battery or USB Cable |
| 호스 길이 | 32.8 피트 (10m) |
| 제어 유형 | 앱 제어 |
| Number of Pieces (for 10 plants) | 10 (Micro Drip Emitters) |
| 최대 압력 | 0.3개의 막대 |
| 물의 흐름 | 30L/시간 |
| 작동 온도 | 3°C ~ 50°C(37°F ~ 122°F) |
| 권tag전자 및 현재 | 5V & 1A |
| 품목 무게 | 1.37파운드 |
| 패키지 크기 | 8.58 x 5.87 x 3.9 인치 |
| 한국어: | 726754250156 |
Image: Device features and technical specifications.
보증 및 지원
For detailed warranty information and customer support, please refer to the official RAINPOINT web사이트를 방문하거나 고객 서비스에 문의하세요.
추가 리소스와 FAQ도 다음에서 찾을 수 있습니다. RAINPOINT Store on Amazon.
An installation manual in PDF format is also available: 설치 설명서(PDF).
