소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Neoteck DC 12V Timer Switch. Please read this manual thoroughly before use to ensure proper functionality and safety.
Figure 1: Neoteck DC 12V 16A Electronic LCD Timer Switch overview.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 네오텍 |
| 색상 | Gray, Off-white |
| 재료 | 폴리카보네이트 |
| 제품 치수 | 1.97인치 깊이 x 3.15인치 너비 x 3.15인치 높이 |
| 품목 무게 | 9.9온스(281그램) |
| 설정 수 | 16개의 ON/OFF 프로그램 |
설치 및 배선
Before installation, ensure the power supply is disconnected. Refer to the wiring diagram for correct connections.
Figure 2: Product dimensions, wiring diagram, and display symbol explanations.
배선 연결
Connect the timer switch according to the provided diagram. Ensure the fire line and neutral line are correctly connected to the input terminals. The output terminals connect to your electrical appliances.
디스플레이 심볼
Understand the symbols on the LCD for proper operation:
- P: 프로그램 설정
- 디+: 요일 조정
- H+: 시간 조정
- 남+: 분 조정
- 시계: Time display/Exit program mode
- C: 리셋 버튼
- 수동 : Manual ON/OFF/AUTO mode selection
- C/R: Cancel/Recovery
작동 지침
1. Local Time Setting
- "시계" 버튼을 누르세요.
- 누르다 D+ 하루를 설정합니다.
- 누르다 H+ 시간을 설정합니다.
- 누르다 M+ 분을 설정합니다.
2. 프로그래밍 모드 진입
To set ON/OFF times, follow these steps:
- 누르다 P (Program) once. The display will show "01 ON".
- 사용 D+, H+, M+ to set the desired turn ON time.
- 누르다 P 다시 한번. 디스플레이에 "01 OFF"가 표시됩니다.
- 사용 D+, H+, M+ to set the desired turn OFF time.
- 추가적인 켜짐/꺼짐 프로그램(최대 16개)을 만들려면 1~4단계를 반복하십시오.
- After setting all programs, press the "Clock" button to save and exit.
Figure 3: Detailed steps for setting local time and programming ON/OFF cycles.
3. 수동 모드 선택
를 누르세요 수동 button to cycle through modes: ON, AUTO, OFF. In AUTO mode, the timer operates according to your programmed settings.
4. Resetting Programs
To clear all programs and reset the timer, press the C (Reset) button using a pointed object.
5. 배터리 교체
The timer switch includes a rechargeable lithium battery for power reserve during outages. If the display is blank or erratic, the battery may need replacement. Carefully open the casing and replace the CR2032 lithium cell. Ensure correct polarity.
유지
- 장치를 깨끗하고 건조하게 유지하십시오.
- 타이머를 극한 온도나 직사광선에 노출시키지 마세요.
- 배선 연결 상태를 정기적으로 점검하여 안전을 확보하십시오.
- The internal lithium battery (CR2032) is rechargeable and provides power reserve. If the timer loses settings during power outag네, 배터리를 교체해야 할 수도 있습니다.
문제 해결
- 타이머가 설정된 시간에 켜지거나 꺼지지 않습니다.
- Ensure the timer is in "AUTO" mode.
- Verify that the current time and programmed times are set correctly.
- 모든 배선 연결을 확인하십시오.
- 화면이 비어 있거나 제대로 표시되지 않습니다:
- 타이머의 전원 공급을 확인하십시오.
- The internal battery may be depleted. Replace the CR2032 lithium cell if necessary (refer to Operating Instructions for battery replacement).
- Timer gets warm during operation:
- Some warmth is normal, especially with higher loads. Ensure the timer is not enclosed in a way that prevents proper ventilation.
- If it becomes excessively hot or emits smoke/odor, immediately disconnect power and contact support.
- Incorrect settings after power outage:
- The internal battery may not be holding a charge. Replace the CR2032 lithium cell.
일반적인 응용 프로그램
The Neoteck DC 12V Timer Switch can be used for various applications requiring scheduled power control:
- Preventing overcharge for battery-powered devices.
- Controlling water pumps or irrigation systems.
- Managing water heater operation.
- Automating lighting systems.
- Controlling chicken coop doors.
- Solar tracking systems.
그림 4: 예amples of timer switch applications.
영상 1: 언박싱 및 초기 설정view of the Neoteck DC 12V Timer Switch, showing package contents and the device itself.
보증 정보
Neoteck products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Neoteck web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
고객 지원
If you encounter any issues or have questions regarding your Neoteck DC 12V Timer Switch, please contact our customer support team:
- 이메일: support@neoteck.com
- Web대지: 방문하세요 아마존에서 네오텍 스토어를 만나보세요 FAQ 및 추가 리소스를 확인하세요.
Please provide your product model number (DC 12V Timer Switch) and a detailed description of the issue when contacting support.
