SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. 이상view

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outag에스.

그림 1.1: 전면 view of the TM618 Timer Module.

2. 주요 특징

• 컴팩트하고 공간을 절약하는 디자인.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. 설정 및 설치

3.1. 배선도

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Initial Power-Up and Battery

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. 사용 설명서

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. 현재 시간 설정

1. 를 누르세요 시계 버튼을 누르고 계세요.
2. 잡고 있는 동안 시계, 누르다 주 현재 요일을 설정합니다.
3. 잡고 있는 동안 시계, 누르다 시간 현재 시간을 설정합니다.
4. 잡고 있는 동안 시계, 누르다 최소 현재 분을 설정합니다.
5. 릴리스하다 시계 버튼을 클릭하세요. 이제 시간이 설정되었습니다.

4.2. ON/OFF 시간 프로그래밍

이 타이머는 최대 16개의 켜짐/꺼짐 프로그램을 지원합니다. 각 프로그램은 켜짐 시간과 꺼짐 시간으로 구성됩니다.

1. 를 누르세요 음식물 버튼을 한 번 누르세요. 디스플레이에 "1 ON"이 표시됩니다.
2. 누르다 주 to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. 누르다 시간 원하는 ON 시간을 설정하세요.
4. 누르다 최소 원하는 ON 분을 설정합니다.
5. 누르다 음식물 다시 한번. 디스플레이에 "1 OFF"가 표시됩니다.
6. 2~4단계를 반복하여 이 프로그램의 원하는 꺼짐 날짜, 시간 및 분을 설정하십시오.
7. 누르다 음식물 to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press 상기하다 ~하는 동안 viewing the specific ON or OFF program you wish to clear.

4.3. 수동 조작

를 누르세요 수동 버튼을 눌러 다양한 작동 모드를 전환할 수 있습니다.

• 자동 켜짐: The timer is currently ON and will follow the programmed schedule.
• 자동 꺼짐: The timer is currently OFF and will follow the programmed schedule.
• 에: The timer is forced ON, overriding any programs.
• OFF : The timer is forced OFF, overriding any programs.

4.4. Recall Function

그만큼 상기하다 button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. 유지관리

5.1. 배터리 관리

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. 청소

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing 또는 디스플레이를 확인하십시오. 기기에 액체가 들어가지 않도록 하십시오.

6. 문제 해결

• 디스플레이가 비어 있습니다: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• 실행되지 않는 프로그램: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review your programmed ON/OFF times for accuracy.
• 타이머가 버튼에 반응하지 않습니다: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. 사양

7.1. 치수

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. 보증 및 지원

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.