오디오테크니카 AT-LP7 벨트 구동 턴테이블 사용 설명서

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your Audio-Technica AT-LP7 belt-drive turntable. Please read this manual thoroughly before using the product to ensure correct operation and to maximize its performance and longevity. Keep this manual for future reference.

안전 정보

화재, 감전 및 부상의 위험을 줄이기 위해 이 제품을 사용할 때는 항상 기본적인 안전 수칙을 준수하십시오. 제품을 비나 습기에 노출시키지 마십시오. 뚜껑을 열지 마십시오.asing; refer all servicing to qualified personnel. Ensure the power cord is securely connected and not damaged. Disconnect the power adapter from the outlet when not in use for extended periods.

패키지 내용

다음 품목이 모두 패키지에 포함되어 있는지 확인하세요.

• 턴테이블 유닛
• 더스트 커버
• 플래터
• 안전 벨트
• 균형추
• Headshell (AT-HS10) with VM Stereo Cartridge (VM520EB)
• EP Adapter (for 45 RPM records)
• Audio Cable (approx. 1.4m)
• AC Adapter (approx. 1.3m)

설정

1. 풀기 및 배치

포장에서 모든 구성품을 조심스럽게 꺼내십시오. 턴테이블을 직사광선, 열원 및 과도한 진동을 피해 안정적이고 평평한 곳에 놓으십시오. 제품 주변에 충분한 환기가 이루어지도록 하십시오.

2. 플래터 및 벨트 설치

1. Place the platter onto the spindle on the turntable base.
2. Locate the drive belt. Carefully stretch the drive belt around the inner rim of the platter and then around the motor pulley.

Image: The Audio-Technica AT-LP7 turntable, showing the main unit with the platter and tonearm assembled. This provides an overview 제품의 외관에 관한 것입니다.

3. Cartridge and Headshell Installation

The AT-LP7 comes with a pre-mounted VM520EB cartridge on an AT-HS10 headshell. If you need to install or replace a cartridge:

1. Attach the headshell (with cartridge) to the tonearm. Secure it by rotating the locking ring clockwise.
2. Ensure the stylus guard is in place before proceeding.

Image: A close-up of a hand carefully handling the VM520EB cartridge, which is attached to the headshell and tonearm. This illustrates the process of cartridge adjustment or installation.

4. Tonearm Balance and Tracking Force Adjustment

1. 제로 밸런스: With the stylus guard on, gently release the tonearm clamp. Rotate the counterweight until the tonearm is horizontally balanced.
2. 추적력: While holding the counterweight stationary, rotate the tracking force ring to '0'. Then, rotate the entire counterweight to set the recommended tracking force (standard 2.0g for VM520EB).
3. 안티 스케이트 : Set the anti-skate dial to the same value as the tracking force.

5. 오디오 시스템 연결

The AT-LP7 features a built-in phono preamplifier, allowing connection to either a phono input or a line-level input on your amp수신자 또는 수신자.

1. Connect the supplied audio cable to the RCA output jacks on the rear of the turntable.
2. Set the PHONO/LINE selector switch on the rear panel to the appropriate position:
   • 포노: 에 연결하는 경우 amp포노 입력 단자가 있는 앰프.
   • LINE : If connecting to a line-level input (e.g., AUX, CD) on an amplifier without a phono input.
3. Connect the other end of the audio cable to the corresponding input on your amp리퍼.
4. Connect the AC adapter to the DC IN jack on the turntable and then plug it into a power outlet.

Image: The rear panel of the AT-LP7 turntable, showing the output selector switch (PHONO/LINE), RCA output jacks, and the DC IN power input. This highlights the connectivity options.

운영

1. 레코드 재생

1. 턴테이블에 레코드를 올려놓으세요. 45RPM 싱글 레코드를 재생하려면 EP 어댑터를 사용하세요.
2. Select the appropriate speed (33-1/3 or 45 RPM) using the speed selector knob.
3. 카트리지에서 스타일러스 가드를 제거합니다.
4. 톤암 리프트 레버를 사용하여 톤암을 부드럽게 들어 올리십시오.
5. 톤암을 레코드의 원하는 시작 홈 위로 이동시키세요.
6. 리프트 레버를 사용하여 톤암을 천천히 내리십시오. 스타일러스가 레코드에 닿으면 재생이 시작됩니다.

이미지: 위에서 아래로 view of the AT-LP7 turntable with a record spinning on the platter and the tonearm positioned for playback. This illustrates the turntable in operation.

2. 재생 중지

1. 톤암 리프트 레버를 사용하여 톤암을 들어 올리십시오.
2. Return the tonearm to its rest and secure it with the clamp.
3. Replace the stylus guard.
4. Press the STOP button to halt platter rotation.

3. Using the Dust Cover

The detachable dust cover protects the turntable from dust when not in use. Simply place it over the turntable. Remove it during playback to prevent acoustic feedback and ensure optimal sound quality.

Image: The AT-LP7 turntable with its transparent dust cover positioned over the platter and tonearm, demonstrating its protective function.

유지

1. 스타일러스 청소

Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. A dirty stylus can cause distorted sound and damage to your records.

2. 턴테이블 청소

Wipe the turntable cabinet and dust cover with a soft, dry cloth. For stubborn dirt, use a cloth lightly damp물로 세척하세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.

3. 벨트 교체

The drive belt is a consumable item. If the platter speed becomes inconsistent or the belt shows signs of wear, it may need to be replaced. Contact Audio-Technica support for replacement belts.

문제 해결

• 전원 없음: Ensure the AC adapter is securely connected to both the turntable and a working power outlet.
• 소리가 나지 않거나 볼륨이 낮음: Check all audio cable connections. Verify the PHONO/LINE selector switch is set correctly for your amp앰프 입력. amplifier's input is selected and volume is adjusted.
• 왜곡된 소리: Clean the stylus. Check tracking force and anti-skate settings. Ensure the record is clean and free of debris.
• 잘못된 속도: Verify the speed selector is set to the correct RPM (33-1/3 or 45) for the record being played. Check if the drive belt is properly seated and not worn.
• 허밍 소음: Ensure the turntable is properly grounded if your amplifier requires it (though the AT-LP7 has a built-in pre-amp, grounding can sometimes help with external phono stages). Move the turntable away from other electronic devices that may cause interference.

명세서

보증 및 지원

For warranty information, product support, or to purchase replacement parts, please visit the official Audio-Technica website or contact your local Audio-Technica dealer. Keep your proof of purchase for warranty claims.

더 많은 정보와 지원은 다음에서 찾을 수 있습니다. Audio-Technica Brand Store.