소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Morimoto M LED 2.0 Bi-LED Projector. Designed for custom automotive retrofits, this universal projector lens offers both low beam and high beam functionality with an ECE-compliant RHD (Right-Hand Drive) beam pattern and cutoff. Please read this manual thoroughly before beginning any installation or operation to ensure proper function and safety.
Image: The Morimoto M LED 2.0 Bi-LED Projectors, showcasing the compact design and the product packaging.
무엇이 포함됩니까?
설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
- 영사기: 1x Morimoto M LED 2.0 Bi-LED RHD Projector
- 운전사: 1x M LED 1.0 Driver
- 하드웨어: 1x Threaded shaft with lock ring
이미지: 폭발 view of the projector components, illustrating the lens, housing, and associated hardware.
설정 및 설치
The Morimoto M LED 2.0 Bi-LED Projector is designed for universal fitment in custom automotive retrofit applications. Due to the specialized nature of headlight retrofitting, professional installation is highly recommended. This section provides general guidance.
설치 전 확인 사항
- 전기 작업을 시작하기 전에 차량 배터리의 전원을 차단하십시오.
- Confirm the projector fits within the intended headlight housing.
- 모든 구성품을 검사하여 손상 흔적이 있는지 확인하세요.
프로젝터 장착
The projector utilizes a threaded shaft for secure mounting. This allows for precise adjustment and locking into place within the headlight assembly.
- Carefully insert the projector into the headlight housing opening.
- Secure the projector using the provided threaded shaft and lock ring from the rear of the housing.
- Ensure the projector is oriented correctly for the RHD beam pattern.
전기 연결
Connect the M LED 1.0 Driver to the projector and then to the vehicle's electrical system. The system operates on a 9-30V DC input.
- Connect the projector's cable to the input port on the M LED 1.0 Driver.
- Connect the driver's power input to the vehicle's low beam and high beam wiring. Consult a vehicle-specific wiring diagram if unsure.
- 모든 연결 부분이 안전하고 적절하게 절연되어 단락을 방지하세요.
Image: The M LED 2.0 Bi-LED drivers, essential components for power regulation and function of the projectors.
작업
The Morimoto M LED 2.0 is a Bi-LED projector, meaning it provides both low beam and high beam functionality from a single projector unit. The transition between low and high beam is controlled by an internal cutoff shield mechanism.
Low Beam Function
When the low beams are activated, the internal cutoff shield is in place, creating a sharp, ECE-compliant RHD cutoff line. This prevents glare for oncoming traffic while providing ample illumination of the road ahead.
이미지: 전ample of the RHD beam pattern with a distinct cutoff line, as projected on a test wall.
High Beam Function
When the high beams are activated, the cutoff shield retracts, allowing the full light output to be projected. This provides maximum illumination for increased visibility during night driving in areas without oncoming traffic.
Light Path and Cutoff Mechanism
The projector utilizes a sophisticated optical system, including a sub-reflector and cutoff shield, to precisely control the light output and beam pattern. The RHD beam pattern ensures proper illumination for right-hand drive vehicles.
Image: Technical diagram explaining the internal optics and how the light is managed to create the desired beam patterns.
유지
The Morimoto M LED 2.0 Bi-LED Projector is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.
- 청소: Keep the exterior lens of the headlight assembly clean from dirt and debris. Use a soft cloth and mild cleaning solution. Do not use abrasive cleaners.
- 점검: Periodically check the wiring connections for any signs of wear or corrosion.
- 방수 기능: The projector is designed to be waterproof. Ensure that the headlight housing itself is properly sealed after installation to protect the internal components from moisture.
문제 해결
If you encounter issues with your Morimoto M LED 2.0 Bi-LED Projector, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Projector does not illuminate | 전원이 안 들어옴, 연결 불량, 드라이버 불량. | Check all wiring connections. Verify power supply to the driver. Test the driver if possible. |
| High beam not activating | Wiring issue to high beam trigger, faulty driver. | Ensure high beam trigger wire is correctly connected to the driver. Check driver functionality. |
| Improper beam pattern/cutoff | Projector not seated correctly, internal component misalignment. | Re-check projector mounting and orientation. If issue persists, contact support. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Morimoto customer support.
기술 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | PR353 |
| 광원 | HML-3 7545 LED |
| 색온도 | 6300K |
| 기능 | Bi-LED (Low Beam & High Beam) |
| Traffic Pattern | RHD (Right-Hand Drive) with ECE Cutoff |
| 강함 | 70,000cd |
| 힘 | 29.5와트 |
| 입력 Voltage | 9-30V DC |
| 렌즈 직경 | 3.0인치 |
| 렌즈 소재 | 사파이어 유리 |
| 치수(높이 x 너비 x 깊이) | 82mm x 95mm x 124mm (150mm with shaft) |
| 샤프트 직경 | 35mm |
| 품목 무게 | 1 파운드 |
| 특별 기능 | 방수복 |
| 자동차 적합 유형 | 유니버설 핏 |
보증 및 지원
보증 정보
The Morimoto M LED 2.0 Bi-LED Projector comes with a 5년 보증. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the official Morimoto web사이트를 방문하거나 고객 서비스에 문의하세요.
고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please contact Morimoto customer support. You can typically find contact information on the official Morimoto web사이트 또는 공인 딜러를 통해 구매하세요.
온라인 리소스: 방문하세요 Morimoto Store on Amazon 추가 제품 정보 및 리소스를 확인하세요.
