하이퍼 터프 20886

하이퍼 터프 300루멘 LED 헤드라이트amp

모델: 20886 사용자 설명서

1. 서론

Thank you for choosing the Hyper Tough 300-Lumen LED Headlamp. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your headlamp사용하기 전에 이 설명서를 자세히 읽고 나중에 참조할 수 있도록 보관하십시오.

2. 안전 정보

  • 배터리 안전: Always insert batteries correctly, observing polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries if the headlamp will not be used for an extended period. Dispose of used batteries responsibly.
  • 눈 안전: Do not shine the light directly into eyes, as it can cause temporary vision impairment or damage.
  • 열: The LED light source may become warm during prolonged use. Avoid direct contact with the light housing when operating for extended periods.
  • 방수 기능: 이 헤드amp is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion.
  • 영향: While impact-resistant, avoid dropping the headlamp from excessive heights to prevent damage.

3. 패키지 내용

  • 하이퍼 터프 300루멘 LED 헤드라이트amp (1)
  • AAA 배터리 (3)

4. 제품 오버view

The Hyper Tough 300-Lumen LED Headlamp features a versatile lighting system with both spot and flood modes, controlled by a variable light output dial. It is designed for hands-free illumination in various environments.

하이퍼 터프 300루멘 LED 헤드라이트amp, overall view

그림 1: 전반적인 view of the Hyper Tough 300-Lumen LED Headlamp, showing the main light unit, adjustable strap, and rear battery pack.

Close-up of the variable light output dial on the Hyper Tough headlamp

그림 2: Close-up of the variable light output dial, located on the side of the headlamp unit, used for mode and brightness selection.

5. 설정

5.1 배터리 설치

  1. Locate the battery compartment at the rear of the head strap.
  2. 배터리 덮개를 엽니다.
  3. Insert three (3) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
  4. 배터리 덮개를 단단히 닫으세요.

5.2 헤드 스트랩 조절하기

머리amp features a two-way fully adjustable head strap for a comfortable and secure fit. Adjust the elastic straps by sliding the buckles to achieve the desired tension and position on your head. The rear-mounted battery pack aids in improved weight distribution.

6. 사용 설명서

The Hyper Tough 300-Lumen LED Headlamp offers multiple lighting modes and variable output control via a single dial.

  1. 전원 켜기/끄기: Rotate the variable light output dial clockwise to turn the headlamp on. Continue rotating to cycle through modes and adjust brightness. Rotate counter-clockwise until it clicks to turn the headlamp 끄다.
  2. Mode Selection and Brightness Control: The dial allows seamless transition between different light modes and brightness levels.
    • Spot Modes: As you rotate the dial clockwise from the off position, the headlamp will activate in spot mode. Continue rotating to increase brightness through Spot Low, Spot Medium, and Spot High. This mode provides a focused beam for distance illumination.
    • 홍수 모드: Further rotation of the dial will engage the flood mode. This mode provides a wide, uniform beam pattern, ideal for close-range work and reduced glare.
Hyper Tough headlamp illuminating in spot mode

그림 3: 머리amp operating in a focused spot beam mode, suitable for illuminating distant objects.

Hyper Tough headlamp illuminating in flood mode

그림 4: 머리amp operating in a wide flood beam mode, providing broad illumination for close-up tasks.

7. 유지관리

7.1 청소

헤드를 닦아주세요amp 부드러운 damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic housing or lens.

7.2 배터리 관리 및 보관

  • Replace batteries when the light output becomes dim or inconsistent.
  • 만약 헤드가amp will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and corrosion.
  • 헤드를 저장하세요amp 직사광선을 피해 서늘하고 건조한 곳에 보관하십시오.

8. 문제 해결

문제가능한 원인해결책
헤드amp 켜지지 않습니다.배터리가 소진되었거나 잘못 삽입되었습니다.배터리를 새 배터리로 교체하고 극성이 올바른지 확인하세요.
빛이 어둡거나 깜빡입니다.배터리 전원이 부족합니다.배터리를 교체하세요.
다이얼이 뻣뻣하거나 돌리기 힘듭니다.장치에 먼지나 이물질이 있습니다.Gently clean around the dial. Do not force rotation.

9. 사양

특징세부 사항
모델 번호20886
Light Output (Spot High)300루멘
Run Time (Spot High)9시간 15분
Beam Distance (Spot High)155 미터
Light Output (Spot Medium)80루멘
Run Time (Spot Medium)32시간 30분
Beam Distance (Spot Medium)94 미터
Light Output (Spot Low)30루멘
Run Time (Spot Low)85시간 15분
Beam Distance (Spot Low)59 미터
Light Output (Flood)95루멘
Run Time (Flood)24시간
Beam Distance (Flood)13 미터
전원3 x AAA 배터리(포함)
광원 유형주도의
재료플라스틱
방수성IPX4(방수)
충격 저항성1미터
치수(소포)21.1 x 17.6 x 7.9cm
무게 (소포)256g

10. 보증 및 지원

Specific warranty information for this product was not provided in the available data. For warranty claims or technical support, please refer to the product packaging or contact Hyper Tough customer service directly through their official web사이트 또는 연락처 채널.

관련 문서 - 20886

사전view Hyper Tough HT19-401-003-11 20V Max 무선 체인톱 빠른 시작 가이드
Hyper Tough HT19-401-003-11 20V Max 무선 사슬톱에 대한 빠른 시작 가이드로, 충전, 배터리 설치, 조립 및 안전 작동 절차에 대한 내용을 담고 있습니다.
사전view 하이퍼 터프 1.5AMP 디테일 샌더 사용 설명서
Hyper Tough 1.5에 대한 포괄적인 사용 설명서AMP 안전 지침, 작동, 유지관리, 사양 및 보증 정보를 다루는 디테일 샌더(모델 AQ20021G)입니다.
사전view HYPER TOUGH HT300 OBD2 코드 리더기 사용 설명서
이 종합 사용 설명서는 HYPER TOUGH HT300 OBD2 코드 리더기의 작동 지침과 안전 정보를 제공합니다. 1996년 이후 출시된 OBD2 차량의 문제 해결, '엔진 점검' 경고등 문제 해결, 일반 및 제조사별 코드 검색, 정지 화면 데이터 표시 방법을 알아보세요.
사전view 하이퍼 터프 2.0 Amp 1/4 시트 샌더 사용 설명서
Hyper Tough 2.0 사용 설명서 Amp 1/4 시트 샌더(모델 AQ20019G)에는 안전 지침, 도구 해부학, 작동, 설치, 문제 해결, 유지 관리, 사양 및 보증 정보가 포함되어 있습니다.
사전view Hyper Tough 40V MAX 12인치 무선 자동급유식 전기톱: FAQ, 설명서 정보 및 보증
Hyper Tough 40V MAX 12인치 무선 자가급유식 체인톱(HT19-401-003-04)에 대한 일반적인 질문에 대한 답변을 확인하세요. 배터리 호환성, 체인 조립, 오일 사용, 유지 관리 및 보증에 대한 자세한 정보를 알아보세요.
사전view Hyper Tough 20V 7.5인치 팬 사용 설명서
Hyper Tough 20V 7.5인치 팬(모델 C1005)의 안전, 작동, 유지 관리 및 문제 해결 방법을 자세히 설명하는 종합 사용 설명서입니다. 안전하고 효과적인 사용을 위한 필수 안내서입니다.