WOBANE LED 디스플레이 조명 키트(모델 WBE006) 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your WOBANE LED Display Light Kit, Model WBE006. This kit is designed to provide versatile and efficient lighting for various applications such as showcases, bookshelves, kitchen counters, and other shelving units. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. 안전 지침

• 설치 또는 유지 관리 전에 전원 공급 장치가 분리되어 있는지 확인하십시오.
• 본 제품은 실내에서만 사용하도록 설계되었습니다. 물이나 높은 습도에 노출시키지 마십시오.
• Use only the provided 24W ETL Listed power adapter. Using an incompatible adapter may damage the product or pose a fire hazard.
• Do not cut the LED strips at any point other than the designated cut marks.
• LED 스트립을 심하게 구부리지 마십시오. 내부 회로가 손상될 수 있습니다.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• If any part of the kit is damaged, discontinue use immediately and contact customer support.

3. 패키지 내용

아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하세요.

• 8 x 12-inch LED Light Bars
• 1 x 24W ETL Listed Power Supply
• 4 x 6.7-inch Straight Connectors
• 2 x 20-inch Straight Connectors
• 5 x 90-degree Connectors
• 2 x Cross Connectors
• 1 x "U" Style Connector
• 케이블 홀더 2개
• 5 x PINs (for connectors)

그림 1: 이상view of included components in the WOBANE LED Display Light Kit.

4. 제품 사양

Figure 2: The included 24W ETL Listed power adapter.

5. 설정 및 설치

5.1 준비

1. 표면 청소: Ensure the installation surface is clean, dry, and free of dust or grease. This will ensure optimal adhesion of the LED strips.
2. 레이아웃 계획: Before peeling off the adhesive, plan the desired arrangement of your LED strips and connectors. Consider the length of the strips and the various connector types (straight, 90-degree, cross, U-shape) to achieve your desired lighting design.

Figure 3: Key steps for preparing the surface and attaching the LED strips.

5.2 Attaching LED Strips

3. 떼어서 붙이기: Carefully peel off the protective backing from the adhesive tape on the back of each LED strip.
4. 위치 및 보도: Firmly press the LED strip onto the prepared surface, ensuring good contact along the entire length.

5.3 Connecting LED Strips

The kit includes various connectors to create custom lighting configurations:

• Straight Connectors: Use these to extend the length of your LED strips in a straight line. The kit includes 6.7-inch and 20-inch options to bridge gaps.
• 90-Degree Connectors: Ideal for turning corners in cabinets or shelves.
• Cross Connectors: Allows for branching the LED strips in multiple directions, useful for creating unique patterns or lighting multiple sections from a central point.
• "U" Style Connector: Provides flexibility for specific corner or edge applications.

To connect, align the pins of the connector with the contact points on the LED strip and gently press them together. Ensure a secure connection for proper electrical contact.

Figure 4: Different types of connectors for flexible installation.

그림 5: example installation showing the use of connectors and the ON/OFF switch.

The LED strips can be cut at designated marks (typically every 3 LEDs) if a shorter length is required. Always cut only at these marked points to avoid damaging the strip.

Figure 6: Detailed diagram of LED strip dimensions and included accessories.

5.4 전원 연결

5. Connect the power adapter to the end of your assembled LED strip configuration.
6. 전원 어댑터를 표준 전기 콘센트에 연결하십시오.
7. Use the included cable holders to secure the power cable and prevent it from falling or being accidentally disconnected.

그림 7: 예ample of using long connectors to bridge separate cabinets.

6. 사용 설명서

Once the LED light kit is fully installed and connected to power, you can operate it using the inline switch on the power cable.

• 전원 켜기/끄기: Press the button on the inline switch to turn the lights on or off.
• 밝기 조정: The inline switch may also feature touch controls for adjusting brightness levels. Refer to the specific switch design for detailed operation.

7. 유지관리

• 청소: To clean the LED strips, ensure the power is disconnected. Gently wipe the strips with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• 접착 지속 시간: Over time, the adhesive tape may lose its stickiness, especially in areas with temperature fluctuations or high humidity. If strips begin to detach, clean the surface and reapply with new double-sided adhesive tape suitable for the application.
• 구성 요소 확인: Periodically inspect all connections and cables for any signs of wear or damage.

8. 문제 해결

9. 보증 및 고객 지원

WOBANE products are designed for quality and reliability. For any questions, technical assistance, or warranty inquiries, please contact WOBANE customer support.

You can find more information and contact details on the official WOBANE store: WOBANE Store on Amazon.