1. 제품 오버view
The Elekpia Remote Control is a dedicated replacement remote for compatible Vizio Sound Bar Speaker Systems. It is designed to provide immediate functionality without the need for complex programming or pairing processes. Simply insert the required batteries, and the remote is ready for use.

그림 1: 전면 view of the Elekpia remote control.
2. 설정 지침
2.1 배터리 설치
- 리모콘 뒷면에서 배터리함을 찾으세요.
- 배터리 덮개를 엽니다.
- Insert two (2) new AAA alkaline batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- 배터리 덮개를 단단히 닫으세요.
중요 참고 사항: For optimal performance and to ensure the LCD screen functions correctly, please use BRAND NEW AAA alkaline batteries. 충전식 배터리는 권장하지 않습니다.

그림 2: 각도 view 리모컨의.
3. 사용 설명서
This remote control is designed for immediate use with compatible Vizio Sound Bar Speaker Systems without requiring any programming or pairing. Point the remote directly at your sound bar's infrared receiver.
3.1 기본 기능
- 전원 버튼 (⏻): Press to turn the sound bar on or off.
- 입력 버튼(⎜): Press to cycle through available audio input sources (e.g., Bluetooth, Optical, AUX).
- 메뉴 버튼: Access the sound bar's menu for advanced settings. Use the directional arrows to navigate.
- 볼륨 높이기/줄이기(+/-): Adjust the main volume level of the sound bar.
- 음소거 버튼(🔇): 소리를 음소거하거나 음소거 해제합니다.
3.2 재생 컨트롤
When using Bluetooth or other media playback modes, the following buttons control media playback:
- 재생/일시 정지 버튼(⏯): 오디오 재생을 시작하거나 일시 정지하세요.
- 이전 트랙 버튼 (⏮): 현재 트랙 또는 이전 트랙의 시작 부분으로 이동합니다.
- 다음 트랙 버튼 (⏭): 다음 트랙으로 건너뜁니다.
- Directional Arrows (▲▼◀▶): Navigate through menus or adjust specific settings as displayed on the sound bar's LCD screen.
4. 호환성
This Elekpia remote control is compatible with a wide range of Vizio Sound Bar Speaker System models, including but not limited to:
- SB3251n-E0, SB3831-D0, SB3851-D0, SB4031-D5, SB4051-D5, SB4451-C0, SB4531-D5, SB4551-D5
- SB3621N-E8M, SB3621N-G8, SB3630-E6, SB3651-E6, SB3830-D0
- S3851W-D4, S3851X-C4
- sb3651n-h6
- (and other similar Vizio sound bar models)
5. 유지관리
- 배터리 교체: Replace batteries when the remote's response becomes sluggish or the LCD screen dims. Always use new AAA alkaline batteries.
- 청소: 부드럽고 마른 천으로 리모컨을 닦으세요. 액체 세제나 연마성 재질은 사용하지 마세요.
- 저장: 리모컨은 건조하고, 극한 온도와 직사광선을 피해 보관하십시오.
6. 문제 해결
- 리모컨이 응답하지 않음:
- 배터리가 올바른 극성에 맞게 올바르게 삽입되었는지 확인하세요.
- 오래된 배터리를 새 AAA 알카라인 배터리로 교체하세요.
- Ensure there are no obstructions between the remote and the sound bar's infrared receiver.
- Confirm the remote is pointed directly at the sound bar.
- LCD screen is dim or not visible:
- This is a known characteristic of some Vizio sound bar remotes. Ensure you are using brand new alkaline batteries, as low battery power can exacerbate this.
- 원격 기능에 오류가 있습니다.
- Verify your Vizio sound bar model is listed in the compatibility section.
- No programming is required for this remote; if issues persist, contact customer support.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | Elekpia Viz-soundbar |
| 상표 | 엘렉피아 |
| 제품 치수 | 5.5 x 1.2 x 0.5 인치 |
| 품목 무게 | 1.41 온스 |
| 필요한 배터리 | AAA 건전지 2개 (알칼리 건전지 권장) |
| 색상 | 검은색 |
| 특징 | 인체공학적 디자인 |
| 최대 지원 장치 | 1 |
| 호환 장치 | Vizio Home Theater Sound Bars |
8. 보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact Elekpia customer service directly. Specific warranty details are not provided in this manual.





