BLACK+DECKER 1.5 HP Variable Speed In Ground Pool Pump Instruction Manual

1. 제품 오버view

The BLACK+DECKER 1.5 HP Variable Speed In Ground Pool Pump is designed for efficient and quiet operation in in-ground pool systems. It features WiFi connectivity, Energy Star certification for energy savings, and automatic dual voltage sensing (115V/230V). The pump includes a self-priming motor, low-speed options for thorough filtration, and exclusive self-diagnostics to maintain high performance.

이미지 1.1: 이상view of the BLACK+DECKER 1.5 HP Variable Speed Pool Pump.

주요 특징:

• Self-Priming, Quiet, Variable Speed Motor with Low Speed Options for Thorough Filtration, and Exclusive Self-Diagnostics.
• Consumer-Friendly Installation (1.5” and 2” ports included), with an easy to program touchpad for optimal speeds, and automatic smart dual voltage sensor (115V-230V).
• Permanent magnet technology increases pump efficiency, earning Energy Star Certification for reduced energy costs (qualifies for utility rebates in select states).
• WiFi Enabled: Connects to any Smartphone/Smart device.
• 5-Year Warranty Included.

2. 설정 및 설치

Proper installation is crucial for the optimal performance and longevity of your BLACK+DECKER Variable Speed Pool Pump. Ensure all local codes and ordinances are followed during installation.

2.1 언박싱 및 구성품

Upon unboxing, verify all components are present and in good condition. The package includes the pump unit, instruction manual, electrical cover, union fittings for 1.5" and 2" plumbing, pump basket, and pump lid.

Image 2.1: The pump comes with union adapters for both 1.5" and 2" pipes, and an adjustable base.

Image 2.2: Product dimensions are approximately 26.5" L x 11" W x 13" H. Ensure adequate space for installation.

2.2 배치 및 장착

Place the pump on a level, stable surface. The adjustable base can be removed to anchor the pump directly to a concrete pad, reducing vibration and ensuring stability. Four screws secure the pump to its base, which can be removed for direct mounting.

Image 2.3: The pump should be installed on a stable, level surface near the pool equipment.

2.3 배관 연결

The pump is equipped with both 1.5" and 2" union adapters to accommodate various plumbing sizes. The suction side of the pump is where water enters from the pool, passing through the pump basket. The discharge side is where filtered water returns to the pool. Ensure all connections are watertight to prevent leaks and maintain pump efficiency.

2.4 전기 연결

The pump supports dual voltage (115V/230V). Connect the supply wires to the electrical box located on the back of the motor. Ensure proper grounding and bonding to prevent stray voltage. The electrical box contains terminals for line 1, line 2, and ground connections. Always consult a qualified electrician if unsure about wiring procedures.

Image 2.5: The motor housing includes a protected electrical box for wiring connections and a control panel for operation.

3. 사용 설명서

The BLACK+DECKER Variable Speed Pool Pump features an easy-to-use digital control panel for setting optimal speeds and schedules.

3.1 제어판 이상view

The control panel allows you to adjust pump speed, set operating times, duration, and monitor wattage. It includes buttons for four preset speeds, manual/schedule mode selection, display options, quick clean function, and start/stop.

Image 3.1: The easy programming touchpad allows for individual customization of 4 speeds, ranging from 350 RPM to 3,450 RPM.

3.2 Setting Speeds and Schedules

• 속도 버튼(1-4): Select desired running speed. The pump can operate between 350 RPM and 3450 RPM.
• Manual/Schedule Mode: Toggle between manual operation and programmed schedules.
• 표시하다: Cycle through different display options such as current speed, time, duration, and wattage.
• 빠른 청소: Activate a temporary high-speed cleaning cycle.
• 시작/중지: Initiate or halt pump operation.

Adjusting speeds allows for energy optimization. Run at lower RPMs during off-peak hours for filtration and higher RPMs for cleaning or when more circulation is needed.

4. 유지관리

정기적인 유지 관리는 수영장 펌프의 수명 연장과 효율적인 작동을 보장합니다.

4.1 Cleaning the Pump Basket

The pump basket collects debris before it enters the pump impeller. Regularly inspect and clean the basket to prevent clogs and maintain optimal water flow. To access the basket, simply twist the pump lid counter-clockwise to open, remove the basket, empty debris, and rinse. Reinsert the basket, ensuring it aligns with the grooves, and securely close the lid by twisting clockwise.

4.2 방한처리

In regions with freezing temperatures, proper winterization is essential. The pump includes drain plugs on both the inlet and outlet sides. Remove these plugs to completely drain water from the pump, preventing freeze damage. Store the plugs in a safe place for reinstallation in the spring.

5. 문제 해결

이 섹션에서는 수영장 펌프에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.

• 펌프가 프라이밍되지 않음: Ensure the pump basket is full of water before starting. Check for air leaks in the suction line or a clogged pump basket.
• 유량 감소: Inspect the pump basket and skimmer baskets for debris. Check filter pressure and backwash if necessary. Verify all valves are fully open.
• 비정상적인 소음/진동: Ensure the pump is securely mounted to its base or pad. Check for debris in the impeller or a loose motor component.
• 누출: Inspect all plumbing connections for tightness. Check O-rings on the pump lid and union adapters for proper seating and condition.
• 전기 문제: Ensure the pump is receiving the correct voltage (115V or 230V). Check circuit breakers and electrical connections.

6. 사양

Image 6.1: Detailed product specifications for a similar model (BDXBTV23825).

Image 6.2: Detailed product specifications for a similar model (BDXBTV24333).

7. 보증 및 지원

The BLACK+DECKER 1.5 HP Variable Speed In Ground Pool Pump comes with a 5-Year Warranty. For technical support, troubleshooting assistance, or warranty claims, please contact BLACK+DECKER customer service. Refer to the contact information provided in the full instruction manual included with your product.