소개
This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your Kegco 3P-XCK-2448S Two-Tap Stainless Steel Keg Dispenser. Please read all instructions carefully before use and retain this manual for future reference.
The Kegco 3P-XCK-2448S is a commercial-grade kegerator designed for dispensing beverages from kegs. It features a durable stainless steel exterior and interior, forced air refrigeration, and a dual-faucet tower. This unit is suitable for both freestanding and built-in installations.
안전 정보
- 청소나 유지관리를 하기 전에는 반드시 전원을 차단하세요.
- 장치 주변의 적절한 환기를 확인하십시오.
- 인화성 추진제가 들어 있는 에어로졸 캔 등 폭발성 물질을 이 기기에 보관하지 마십시오.
- 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
- 어린이가 기기에서 멀리 떨어지게 하십시오.
설정
짐 풀기: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and retailer.
놓기: This unit is designed for both freestanding and built-in use. Ensure adequate clearance for ventilation, especially around the front-accessible cooling unit. Place the unit on a level, stable surface capable of supporting its weight (234 lbs) plus the weight of full kegs.
전기 연결: Connect the unit to a grounded electrical outlet. Refer to the specifications for power requirements.
Important Note: This kegerator does not include a draft dispense kit. You will need to purchase dispensing equipment separately (e.g., CO2 tank, regulator, keg couplers, beer lines, gas lines).
초기 운영
- After placement, allow the unit to stand upright for at least 24 hours before plugging it in. This allows the refrigerant to settle.
- Plug in the unit. The digital temperature display will illuminate.
- Adjust the temperature controller to your desired setting. The unit features forced air refrigeration to maintain consistent temperatures.
- Install your chosen kegs and connect the dispense system (purchased separately). The interior is large enough to hold two full-size kegs, or a combination of smaller kegs such as three quarter slim kegs or up to seven 5-gallon kegs.
그림 1: 전면 view of the Kegco 3P-XCK-2448S Two-Tap Stainless Steel Keg Dispenser with dual faucet tower.
그림 2: 내부 view demonstrating capacity for two full-size kegs. Note the internal light and air hoses.
그림 3: 내부 view showing arrangement for multiple smaller kegs, such as seven 5-gallon kegs.
작동 지침
온도 조절
The unit features a digital temperature display and an internal temperature controller. Adjust the temperature as needed for your specific beverages. Forced air is routed into the beer tower to maintain consistent cold temperatures from keg to faucet.
Figure 4: Close-up of the digital temperature display, showing the current internal temperature.
Figure 5: Interior temperature controller dial and switch for the internal light.
Keg Loading and Storage
- The interior is designed to accommodate various keg sizes, including two full-size kegs, up to three quarter slim kegs, or up to seven 5-gallon kegs.
- Two heavy-duty adjustable shelves are included, allowing for versatile storage of cans, bottles, or mugs alongside kegs.
- The rubber floor mat helps protect the stainless steel interior from heavy kegs.
- Self-closing doors with magnetic gaskets ensure a positive seal, and locks are provided for security.
Remote CO2/Nitrogen Cylinder Mount
The unit includes a knockout for mounting a remote CO2 or nitrogen cylinder, providing flexibility for gas supply placement.
유지
물받이 청소
The built-in drip tray routes to an external drain, simplifying daily maintenance. Regularly empty and clean the external drain container and the drip tray grate.
Figure 6: Close-up of the removable drip tray grate on the top surface of the unit.
Figure 7: External drain connection point for the drip tray.
일반 청소
- Wipe down the stainless steel exterior and interior with a soft cloth and mild detergent. Avoid abrasive cleaners.
- Periodically clean the condenser coils located near the cooling unit for optimal performance.
- Ensure all hoses and lines within the cabinet are clear and properly routed.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않음 | 전원 공급이 안 됨; 회로 차단기가 작동함; 전원 코드에 결함이 있음. | Check power outlet; reset circuit breaker; inspect power cord for damage. |
| 장치가 충분히 냉각되지 않음 | Temperature setting too high; obstructed airflow; dirty condenser coils; door not sealing properly. | Lower temperature setting; ensure proper ventilation; clean condenser coils; check door gaskets for proper seal. |
| 과도한 소음 | 장치가 수평이 아닙니다. 팬이 막혔습니다. 구성 요소가 느슨합니다. | 제품이 수평인지 확인하고, 팬 주변에 장애물이 없는지 점검하십시오. 소음이 계속되면 서비스 센터에 문의하십시오. |
| Beer not dispensing properly | CO2 tank empty; regulator pressure incorrect; clogged lines; faulty coupler. | Check CO2 level; adjust regulator pressure; clean beer lines; inspect/replace coupler. (Note: Dispense system is separate). |
명세서
- 모델 번호: 3P-XCK-2448S
- 상표: 케그코
- 제품 크기: 49 x 25 x 36인치(폭 x 깊이 x 높이)
- 품목 무게: 234파운드
- 용량: Two full-size kegs, up to three quarter slim kegs, or up to seven 5-gallon kegs.
- 냉각 시스템: Forced air refrigeration
- 외부 소재: 스테인리스 스틸
- 인테리어 소재 : Stainless Steel walls and ceiling, rubber floor mat
- 특징: Two-faucet tower, digital temperature display, interior lighting, self-closing doors with locks, built-in drip tray with external drain, knockout for remote CO2/nitrogen cylinder.
보증 및 지원
For technical assistance or questions regarding your Kegco 3P-XCK-2448S Keg Dispenser, please contact Kegco customer support. Our knowledgeable team is available during regular business hours to assist with setup and operational inquiries.
반품 정책: Kegco offers hassle-free returns within 90 days of receiving your order if you are not completely satisfied with your purchase.
자세한 내용은 공식을 방문하세요. Kegco Store on Amazon.
