1. 서론
The ABUS Alarmbox 2.0 is a mobile alarm system designed to provide enhanced security for various objects such as bicycles, e-scooters, prams, and other valuable items. It features an intelligent alarm system with 3D position detection, capable of distinguishing between minor impacts and sustained theft attempts. This manual provides detailed instructions for the proper setup, operation, and maintenance of your Alarmbox 2.0.
2. 패키지 내용
- ABUS Alarmbox 2.0 unit
- 2개의 키
- Mounting straps (shortenable metal straps)
- CR2 배터리
3. 안전 정보
- Ensure the Alarmbox is securely mounted to prevent accidental detachment.
- 장시간 극한의 온도나 직사광선에 기기를 노출시키지 마세요.
- Keep keys in a safe place and away from unauthorized access.
- The alarm emits a loud sound (100 dB). Avoid prolonged exposure to the alarm sound at close range.
- 사용한 배터리는 현지 규정에 따라 폐기하십시오.
4. 제품 오버view
Familiarize yourself with the components of your ABUS Alarmbox 2.0.
그림 1: 앞쪽 view of the Alarmbox 2.0, highlighting the power button (left) and key cylinder (right).
그림 2: 맨 위 view of the Alarmbox 2.0, displaying the ABUS logo and the status LED.
그림 3: 옆 view of the Alarmbox 2.0, illustrating the speaker grille for the alarm sound.
5. 설정
5.1 배터리 설치
- Locate the battery compartment on the Alarmbox unit.
- 구획 덮개를 엽니다.
- Insert the supplied CR2 battery, ensuring correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
5.2 Mounting the Alarmbox
The Alarmbox 2.0 can be attached to various round geometries using the provided metal straps.
- Position the Alarmbox on the desired object (e.g., bicycle frame, e-scooter stem).
- Thread the metal straps through the designated slots on the Alarmbox and around the object.
- Tighten the straps firmly to secure the Alarmbox in place. The straps can be shortened if necessary.
그림 4: Example of the Alarmbox 2.0 mounted on an e-scooter, demonstrating its application.
5.3 Connecting Adapter Chains/Cables (Optional)
For additional security, the Alarmbox housing can accommodate ABUS adapter chains or cables (e.g., ACH 6KS, ACL 12/100, ACH IVY 6KS). To connect an adapter:
- Remove the alarm button from the Alarmbox unit.
- Insert the end of the compatible ABUS adapter chain or cable into the opening where the button was removed.
- Ensure the chain/cable is securely seated. The alarm will arm when the cable is inserted and the button is removed.
6. Operating the Alarmbox
6.1 알람 활성화
To activate the alarm function:
- Press the power button on the Alarmbox.
- A short beep will confirm activation. The LED indicator may flash.
- The alarm system is now armed and will detect movement or impacts.
6.2 Deactivating the Alarm
To deactivate the alarm function:
- Insert the key into the key cylinder.
- Turn the key to disarm the system. The power button will pop out.
- The alarm is now deactivated.
6.3 Intelligent Alarm Function
The Alarmbox 2.0 features an intelligent alarm system:
- Short Warning: For minor impacts or brief movements, a short 5-second warning tone will sound. This helps to deter potential thieves without triggering a full alarm for accidental bumps.
- Full Alarm: If the object continues to move or experiences a strong impact after the warning, a loud 100 dB alarm will be triggered for 15 seconds. After 15 seconds, the alarm stops, and the system rearms itself.
7. 유지관리
7.1 배터리 교체
When the battery indicator signals low power, replace the CR2 battery by following the battery installation steps in Section 5.1.
7.2 청소
Clean the Alarmbox with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the housing or internal components. Ensure the device is dry before re-activating.
8. 문제 해결
- 경보가 작동하지 않음: Check if the battery is correctly installed and has sufficient charge. Ensure the power button is fully pressed.
- 오경보: Ensure the Alarmbox is securely mounted and not subject to excessive vibrations from external sources (e.g., strong winds, passing heavy vehicles). The intelligent alarm function is designed to minimize false alarms.
- Alarm too quiet: Check if the speaker grille is obstructed. Ensure the battery has sufficient power.
9. 사양
| 모델 번호 | 61482 |
| 소음 수준 | 100데시벨 |
| 센서 기술 | Vibration Sensor (3D Position Detection) |
| 전원 | 배터리 구동 |
| 배터리 유형 | CR2 (Alkaline) |
| 재료 | 알류미늄 |
| 품목 무게 | 0.52킬로그램(1.14파운드) |
| 제품 크기(L x W x H) | 3.46" x 2.24" x 1.46"(88mm x 57mm x 37mm) |
| 제어 방법 | 터치(버튼) |
| 특별 기능 | Alarm, Battery Indicator, Portable |
10. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the official ABUS web해당 웹사이트를 방문하거나 가까운 ABUS 대리점에 문의하십시오. 구매 영수증을 보관하여 구매 증빙 자료로 활용하십시오.
ABUS Contact Information:
방문해주세요 www.abus.com for the most up-to-date support and contact details.
