Shad H0CR61IF 3P 시스템 설치 및 사용 설명서 (혼다 CB650R용)

1. 제품 오버view

The Shad 3P System is an innovative side attachment system designed for specific motorcycle models, offering a secure and integrated solution for mounting Shad side cases. This system is engineered to be lightweight, minimizing impact on the motorcycle's center of gravity and enhancing safety. It is specifically compatible with SH36 and SH35 side cases.

주요 특징:

• Integrated design for seamless aesthetic with the motorcycle.
• Lightweight construction to maintain motorcycle handling and safety.
• Durable and strong fixings for reliable case attachment.
• Designed and manufactured in Barcelona.

Figure 1: Individual components of the Shad 3P System bracket.

2. 상자 안에 무엇이 들어있나요?

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Shad 3P System fixing kit (specific to Honda CB650R)
• All necessary fasteners and mounting hardware

Note: Side cases (SH36/SH35) are sold separately and are not included with the 3P System kit.

3. 설정 및 설치

This section provides general guidance for installing the Shad 3P System. For detailed, model-specific instructions, always refer to the diagram and instructions included in your physical fixing kit. Professional installation is recommended if you are unfamiliar with motorcycle accessory installation.

필요한 도구(포함되지 않음):

• 표준 미터법 렌치 세트
• 육각렌치 세트
• 토크 렌치(패스너를 제대로 조이는 데 권장됨)

설치 단계(일반):

1. 오토바이 준비: Ensure the motorcycle is on a stable stand. Remove any existing components that obstruct the mounting points for the 3P System, such as passenger grab handles or specific fairing pieces, as indicated in your kit's instructions.
2. 장착 지점 식별: Locate the designated mounting points on the motorcycle frame, typically near the rear footpegs and under the rear seat/fender.
3. Attach Main Brackets: Secure the main support brackets of the 3P System to the motorcycle's frame using the provided fasteners. Do not fully tighten fasteners at this stage.
4. Install Connecting Rods/Bars: Connect any cross-bars or connecting rods between the main brackets to ensure structural integrity.
5. 정렬 및 조임: Once all components are loosely fitted, ensure proper alignment of the entire system. Gradually tighten all fasteners to the torque specifications provided in your kit's instructions.
6. 최종 확인: Verify that the system is securely mounted and does not interfere with any moving parts of the motorcycle or rider/passenger comfort.

Figure 2: The Shad 3P System bracket installed on a Honda CB650R motorcycle, viewed from the rear left side.

Figure 3: A Honda CB650R motorcycle equipped with the Shad 3P System and compatible side cases.

4. 사용 설명서

The Shad 3P System is designed for easy attachment and detachment of compatible Shad SH36/SH35 side cases.

사이드 케이스 부착:

1. Align the mounting points on the back of the SH36/SH35 side case with the corresponding pins and hooks on the 3P System bracket.
2. Gently push the side case onto the bracket until it clicks securely into place.
3. Ensure the case is firmly attached by attempting to pull it away from the motorcycle. It should not move or wobble.
4. Lock the side case using its integrated lock and key mechanism for security.

측면 케이스 분리:

1. Unlock the side case using the key.
2. Locate the release lever or button, typically found inside the case or on the mounting mechanism.
3. Activate the release mechanism while gently pulling the side case away from the 3P System bracket.

Figure 4: A Honda CB650R motorcycle fully equipped with the Shad 3P System, side cases, and a compatible Shad top case (top case system sold separately).

5. 유지관리

Regular maintenance ensures the longevity and safe operation of your Shad 3P System.

• 청소: 금속 부품은 순한 비눗물로 세척하십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
• 점검: Periodically inspect all fasteners for tightness. Vibrations from riding can cause fasteners to loosen over time. Re-tighten to specifications if necessary.
• 손상 확인: Check for any signs of damage, cracks, or excessive wear on the brackets and mounting points. Replace damaged components immediately.
• 매끄럽게 하기: If any moving parts or locking mechanisms feel stiff, apply a small amount of silicone-based lubricant.

6. 문제 해결

This section addresses common issues you might encounter with the Shad 3P System.

• Side Case Does Not Attach Securely:
  • Ensure the 3P System brackets are correctly installed and aligned.
  • Verify that the side case is compatible (SH36 or SH35).
  • Check for any obstructions on the mounting points of either the case or the bracket.
• Difficulty Detaching Side Case:
  • Ensure the case is fully unlocked.
  • Apply firm but gentle pressure to the release mechanism while pulling the case.
  • Check for dirt or debris in the locking mechanism and clean if necessary.
• Loose or Rattling Brackets:
  • Re-tighten all mounting bolts and fasteners according to the installation instructions.
  • Inspect for any worn rubber grommets or spacers that may need replacement.

7. 사양

8. 보증 및 지원

For warranty information, please refer to the documentation provided with your purchase or visit the official Shad website. For technical support or inquiries regarding your Shad 3P System, please contact Shad customer service directly.

보증 청구를 위해 항상 구매 증빙 서류를 보관하세요.

9. 공식 제품 영상

판매자가 제공한 해당 상품의 공식 제품 영상은 찾을 수 없었습니다.