1. 서론
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the Okin JLDQ-12 and JLDQ.12.133.226M power recliner and bed motor actuator replacement. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. 제품 오버view 및 구성 요소
The Okin JLDQ.12.133.226M is an electric linear actuator designed for power recliners and adjustable beds. It is specifically engineered as a direct replacement for the original Okin JLDQ.12.133.226M model.
2.1 주요 구성 요소
- 액추에이터 모터: The main unit responsible for linear movement.
- 커넥터:
- 5핀 원형 플러그: 스위치 핸드 컨트롤에 연결하기 위한 용도입니다.
- 2핀 사각형 플러그: 전원 공급 장치에 연결합니다.
Figure 1: Okin JLDQ.12.133.226M motor actuator with attached cables.
그림 2: 상세 view of the 5-pin round plug for the recliner switch and the 2-pin square plug for the power supply.
3. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | JLDQ.12.133.226M |
| 하중 용량 | Push force: 750N, Pull force: 750N |
| 뇌졸중 | 226mm (XNUMXmm) |
| 최소 설치 크기(수축) | 133mm (XNUMXmm) |
| 최대 설치 크기 | 359mm (XNUMXmm) |
| 동작 주파수 | 1분 켜짐 / 8분 꺼짐 |
| 속도 | 29VDC SMPS, 무부하 시 10초 |
| 모습 | 검정색(PA), 은색/흰색(알루미늄) |
| 제품 치수 | 8.9 x 8.9 x 14.13 인치 |
| 품목 무게 | 4.59파운드(2.09킬로그램) |
Figure 3: Product label displaying technical data and model information, including serial number 21061699년 00271분기 그리고 모델 JLDQ.12.133.226M. For patent information, visit www.dewertokin.de/patents.
4. 설정 및 설치
중요 호환성 참고 사항: This motor is specifically designed to replace the OKIN model JLDQ.12.133.226M. Different actuator/motors are generally not compatible due to strict requirements for minimum installation dimensions, stroke, and plug types. Always verify your existing motor's brand and model before attempting replacement.
4.1 설치 전 확인 사항
- 모델 확인: Confirm that your existing motor is an Okin JLDQ.12.133.226M.
- 전원 차단: Ensure the power supply to the recliner or bed is completely disconnected before starting any installation work.
- 구성 요소 검사: Check the new motor and cables for any visible damage.
4.2 설치 단계
- 기존 모터를 제거하세요: Carefully detach the old motor from the recliner or bed frame. Note how it was connected to ensure correct installation of the new unit.
- 새 모터 위치 지정: Align the new Okin JLDQ.12.133.226M motor with the mounting points on the frame.
- 모터 고정: Fasten the motor securely to the frame using appropriate hardware (not included, typically reused from the old motor or provided with the furniture).
- 케이블 연결:
- 연결하다 5핀 원형 플러그 to the hand control switch.
- 연결하다 2-pin square plug to the power supply unit.
- 케이블 관리 : Ensure all cables are routed safely, away from moving parts, and secured to prevent pinching or damage.
그림 4: 예ample of the motor actuator mounted, showing its extended position.
5. 사용 설명서
Once the motor is correctly installed and all connections are secure, reconnect the main power supply to your recliner or adjustable bed.
- 전원 켜기: Plug the recliner/bed into a suitable power outlet.
- 손 통제: Use the hand control unit to operate the recliner or bed. Press and hold the appropriate buttons to extend or retract the actuator, adjusting the position as desired.
- 듀티 사이클: Adhere to the specified operation frequency: 1분 켜짐 / 8분 꺼짐. Continuous operation beyond 1 minute can lead to overheating and damage to the motor. Allow the motor to cool down for at least 8 minutes after 1 minute of continuous use.
6. 유지관리
Regular maintenance ensures the longevity and reliable operation of your Okin motor actuator.
- 청소: Wipe clean the exterior of the motor and cables with a dry or slightly damp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
- 케이블 검사: Periodically check all cables and connections for wear, fraying, or loose plugs. Ensure they are securely attached and not pinched.
- 움직이는 부품: Ensure the linear shaft moves freely and is not obstructed by debris or fabric.
- 매끄럽게 하기: 모터는 일반적으로 내부 윤활과 관련하여 유지 보수가 필요 없습니다. 오킨 고객 지원팀의 특별한 지시가 없는 한 내부 부품에 윤활유를 주입하지 마십시오.
7. 문제 해결
If your recliner or adjustable bed is not functioning correctly, follow these troubleshooting steps:
- 움직임 없음:
- Check if the power cord is securely plugged into the wall outlet and the power supply unit.
- Verify that the 2-pin square plug from the motor is firmly connected to the power supply.
- Ensure the 5-pin round plug from the motor is properly connected to the hand control.
- 다른 기기로 벽면 콘센트를 테스트하여 전원이 들어오는지 확인하세요.
- 간헐적 운동:
- 모든 케이블 연결부가 헐거워지거나 손상된 부분이 있는지 점검하십시오.
- Ensure the motor is not overheating. Allow it to cool down if it has been operated continuously.
- 특이한 소음:
- Check for any obstructions around the motor or the linear shaft.
- 모터가 프레임에 단단히 고정되어 진동하지 않는지 확인하십시오.
- Motor Does Not Extend/Retract Fully:
- Verify that there are no physical obstructions preventing full movement.
- Ensure the motor is correctly installed with the specified minimum and maximum installation sizes.
If issues persist after following these steps, contact Okin customer support or a qualified technician.
8. 중요한 안전 정보
- 설치, 유지보수 또는 청소 작업을 하기 전에 항상 전원을 차단하십시오.
- 이 제품은 실내에서만 사용하도록 설계되었습니다.
- Do not allow children or pets to play near the moving parts of the recliner or bed.
- Ensure proper cable routing to prevent tripping hazards or damage to the cables.
- 모터 또는 그 구성품을 임의로 개조하지 마십시오. 허가되지 않은 개조는 오작동을 일으키고 보증을 무효화할 수 있습니다.
- Only use this motor as a replacement for the specified Okin JLDQ.12.133.226M model. Using incompatible parts can cause damage to the furniture and the motor.
9. 보증 및 지원
For warranty information, technical support, or further assistance, please refer to the official Okin website or contact your product retailer. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the Okin store for more products and information: 아마존에서 오킨 스토어를 만나보세요.
