1. 제품 오버view
The EPLO Smart Toilet E16 is a modern, one-piece bidet toilet designed for enhanced comfort and hygiene. It integrates advanced features such as a heated seat, automatic flushing, and a multi-function bidet system into a sleek, tankless design.
주요 특징:
- 탱크리스 디자인: Provides a compact form factor and efficient water usage.
- 자동 세척: Includes off-seat auto flush, foot sensor flush, button control, and remote control flush options.
- Heated Bidet Seat: Adjustable temperature for personalized comfort.
- Warm Water Bidet: Self-cleaning arc wand with adjustable spray shape, position, water pressure, and temperature for front and rear wash.
- 온풍 건조기: Adjustable air temperature for post-wash drying.
- LED 디스플레이 및 야간 조명: Provides operational status and gentle illumination.
- 자동 탈취: Integrated system to maintain freshness.
- ECO 에너지 절약 모드: 전력 소비를 최적화합니다.
Image 1.1: The EPLO Smart Toilet E16, showcasing its sleek, one-piece design and accompanying remote control.
2. 안전 정보
부상이나 손상을 방지하기 위해 설치 및 사용 전에 모든 안전 지침을 주의 깊게 읽으십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
일반 안전 예방 조치:
- Ensure the toilet is connected to a grounded 110V AC power outlet. Do not use extension cords.
- 제품을 물에 담그거나 전기 부품에 직접 물을 뿌리지 마십시오.
- Keep children and individuals with reduced physical, sensory, or mental capabilities under supervision when operating the toilet.
- 유지관리나 청소를 하기 전에 전원을 분리하세요.
- Do not attempt to repair the unit yourself. Contact qualified service personnel for assistance.
- 변기 뚜껑이나 변기 시트 위에 무거운 물건을 올려놓지 마십시오.
- 욕실의 적절한 환기를 보장하십시오.
3. 설치 및 설정
Professional installation is recommended for this product due to plumbing and electrical requirements. Ensure all local codes and regulations are followed.
포함된 구성 요소:
- Main Unit (EPLO Smart Toilet E16)
- 원격 제어
- 씰링 플랜지
- Installation Cardboard Template
- 사용 설명서 (본 문서)
- 앵글 밸브
- 장착 액세서리 키트
설치 전 체크리스트:
- Verify a 12-inch rough-in measurement from the wall to the center of the drain pipe.
- Ensure a 110V AC grounded electrical outlet is available within reach of the toilet's power cord.
- Confirm a 1/2-inch accessory connection type for water supply.
- 욕실의 주수도를 차단하세요.
설치 단계(요약):
- 설치 공간을 준비하려면 기존 변기를 제거하고 플랜지를 청소하십시오.
- Use the provided installation cardboard template to mark drilling points for the mounting bolts.
- Install the mounting bolts and the sealing flange onto the drain pipe.
- Carefully place the EPLO Smart Toilet E16 main unit over the mounting bolts and secure it.
- Connect the water supply line to the angle valve and then to the toilet's water inlet.
- 전원 코드를 접지된 콘센트에 연결하십시오.
- 주 급수를 켜고 누수가 없는지 확인하십시오.
- Perform an initial flush to ensure proper operation.
Image 3.1: Dimensional diagram of the EPLO Smart Toilet E16, showing overall height, depth, width, and rough-in measurement.
4. 사용 설명서
The EPLO Smart Toilet E16 offers multiple ways to operate its various functions. Familiarize yourself with the remote control and side panel buttons for optimal use.
Flushing Options:
- 시트에서 내린 후 자동 물내림 기능: The toilet automatically flushes after you stand up. This feature can be enabled/disabled via the remote control.
- 발 센서식 물내림: Wave your foot near the sensor at the base of the toilet to activate a flush. This feature can be enabled/disabled via the remote control.
- Side Button Flush: Buttons located on the side panel of the toilet allow for manual flushing.
- 원격 제어식 물내림 장치: Use the dedicated flush buttons on the remote control.
Image 4.1: Illustration of the various flushing methods available on the EPLO Smart Toilet E16.
비데 기능:
The bidet wand offers comprehensive cleansing with adjustable settings.
- 자기 청소: The wand cleans itself before and after each use.
- 힙 워시: Standard posterior cleansing.
- 여성청결제: Gentle front cleansing.
- 맥동 세척: Provides a massaging effect.
- 조정 사항: Water pressure, spray position, and water temperature can be adjusted using the remote control.
그림 4.2: 아치형 스프레이 노즐과 다양한 세척 모드.
편의 기능:
- 가열된 좌석: Adjust the seat temperature (86°F to 99°F) via the remote or side panel.
- 온풍 건조기: After cleansing, use the warm air dryer with adjustable temperature settings for comfort.
- 야간 조명: A soft LED nightlight provides illumination in the dark.
- LED 디스플레이: Shows current settings for air temperature, water temperature, and seat temperature.
Image 4.3: Comfort features including heated seat, warm air dryer, and nightlight.
고급 기능:
- 사전 적심: The bowl is rinsed when you first sit down to help prevent waste adhesion.
- 자동 탈취: Activated automatically to neutralize odors.
- 에코 모드: Activates energy-saving settings to reduce power consumption.
Image 4.4: Pre-wetting and auto deodorization features.
5. 유지관리
Regular cleaning and maintenance will ensure the longevity and optimal performance of your EPLO Smart Toilet E16.
청소:
- 청소하기 전에 항상 전원을 분리하십시오.
- 부드러운 d를 사용하세요amp cloth and mild, non-abrasive cleaner for the exterior surfaces.
- 강한 화학 물질, 연마 패드 또는 용제를 사용하지 마십시오. 이러한 것들은 마감재를 손상시킬 수 있습니다.
- Clean the bidet wand regularly. The self-cleaning function helps, but manual cleaning may be necessary.
필터 유지 관리:
The tankless design utilizes internal filters to protect the water pump from impurities. If you experience reduced flushing power or water flow, the filters may need cleaning.
- Symptoms of Clogged Filters: Reduced flush strength, weak bidet spray, or no water flow.
- 절차: Disconnect power and water supply. Access the internal water lines (refer to detailed diagrams in the full printed manual if available). Carefully remove and clean the small filters. Reassemble and test. If unsure, contact customer support.
6. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제를 다룹니다. 여기에 나열되지 않은 문제는 고객 지원팀에 문의하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음/LED 디스플레이 꺼짐 | 전원 코드가 뽑혔고, 차단기가 작동하여 전원이 나갔습니다.tage. | Check power connection, reset circuit breaker, verify power supply. |
| Weak flush or no flush | Water supply off, clogged filters, low water pressure. | Ensure water supply is on, clean filters (see Maintenance), check household water pressure. |
| Bidet spray is weak or inconsistent | Clogged bidet nozzle, low water pressure, clogged filters. | Clean bidet nozzle, check water pressure, clean filters. |
| Heated seat/water not working | Feature disabled, temperature setting too low, power issue. | Ensure feature is enabled and temperature is set correctly via remote/side panel. Check power. |
| 리모콘이 응답하지 않음 | 배터리 방전, 방해물, 범위 벗어남. | Replace remote batteries, ensure clear line of sight to toilet, move closer. |
| Foot sensor/Auto flush not working | Feature disabled, sensor obstructed. | Enable feature via remote control (long-press 1/2 flush button for foot sensor, long-press full-flush button for auto-flush), clear any obstructions around the sensor. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | EP-E16 |
| 제품 치수 | 27.2인치 깊이 x 16.14인치 너비 x 19인치 높이 |
| 품목 무게 | 83 파운드 |
| 설치 유형 | 바닥 장착 |
| 모양 | 타원형 |
| 좌석 소재 종류 | PP |
| 권tage | 110볼트(AC) |
| 물 소비량 | 1.6 Gallons per Full Flush / 1.1 Gallons per Half Flush |
| 플러시 타입 | Dual (Siphonic and Jet) |
| 러프인 | 12 인치 |
| 액세서리 연결 | 1/2인치 |
| 디스플레이 스타일 | LED 디스플레이 |
| 인증 | EGS, CUPC, CEC |
| 한국어: | 781509732851 |
8. 보증 및 지원
보증 정보:
The EPLO Smart Toilet E16 comes with a 1 년간 품질 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생한 제조상의 결함 및 고장에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
고객 지원:
If you encounter any problems or have questions regarding your EPLO Smart Toilet E16, please contact EPLO customer service. You can reach us through the Amazon platform, and we commit to replying within 24 hours to assist you.
For detailed troubleshooting or parts inquiries, please provide your model number (EP-E16) and a description of the issue.
