BRIKSMAX LED Lighting Kit for LEGO 76388 Hogsmeade Village Visit - Instruction Manual

소개

This instruction manual provides detailed guidance for installing and operating your BRIKSMAX LED Lighting Kit, specifically designed for the LEGO 76388 Hogsmeade Village Visit model. This kit enhances your LEGO set with custom lighting, bringing the model to life with illuminated details. Please read these instructions carefully before beginning installation to ensure proper setup and safe operation.

안전 정보

• 소형 부품 경고: 이 키트에는 질식 위험을 초래할 수 있는 작은 부품이 포함되어 있습니다. 어린아이의 손이 닿지 않는 곳에 보관하십시오.
• 전기 안전: Ensure all connections are secure before powering on. Do not expose wires or components to water or excessive moisture.
• 배터리 사용: If using a battery holder, ensure batteries are inserted with correct polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the kit will not be used for an extended period.
• Handling Wires: Handle wires carefully to avoid damage. Do not pinch or cut wires during installation.

패키지 내용

설치를 시작하기 전에 아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하십시오.

이미지: 이상view of the BRIKSMAX LED Lighting Kit components, including various dot lights, expansion boards, connecting cables, USB power cable, battery holder, adhesive squares, and a random LEGO plate.

• 4 x 30cm White Dot Lights
• 2 x 15cm Warm White Dot Lights (L)
• 1 x 30cm USB Power Cable
• 6 x 30cm Warm White Dot Lights
• 2 x Warm White Strip Lights
• 2 x 접착 사각형
• 2 x 15cm Warm White Dot Lights
• 2 x 6-port Expansion Boards
• 2 x LEGO Plate (Random Color)
• 1 x 30cm Yellow Dot Light
• 2 x 8-port Expansion Boards
• 1 x AA Battery Holder (Batteries not included)
• 5 x 15cm 연결 케이블

설정 및 설치

The BRIKSMAX LED Lighting Kit is designed for integration with your existing LEGO 76388 Hogsmeade Village Visit model. Detailed, step-by-step instructions are provided in the included user guide. The general installation process involves:

1. 준비: Ensure your LEGO 76388 model is fully assembled and stable. Identify the areas where lights will be installed as indicated in the BRIKSMAX user guide.
2. Disassembly (Partial): Carefully remove specific LEGO bricks as instructed in the BRIKSMAX user guide to create space for wires and lights. This may involve detaching roof sections or wall panels.
3. 조명 배치: Position the dot lights and strip lights according to the provided diagrams. Use the adhesive squares for secure placement where necessary.
4. 배선: Route the connecting cables discreetly between LEGO bricks. Connect the lights to the expansion boards. Ensure wires are not pinched or stressed.
5. Expansion Board Connection: Connect the expansion boards to each other and to the power source (battery holder or USB cable) as shown in the instructions.
6. 재조립: Carefully reattach the LEGO bricks, ensuring all wires are neatly tucked away and do not interfere with the brick connections.
7. 전원 연결: Connect the USB power cable to a compatible USB power source (e.g., power bank, USB wall adapter) or insert AA batteries into the battery holder, observing correct polarity.

For visual guidance, refer to the detailed images and diagrams in your physical BRIKSMAX user guide. The following images illustrate the illuminated model after successful installation:

Image: The Hogsmeade Village Visit model with the BRIKSMAX LED lighting kit installed, showcasing the warm glow from inside the buildings and the street lamp.

Image: An alternative perspective of the lit Hogsmeade Village, emphasizing the exterior illumination and the overall ambiance created by the LED kit.

이미지: 자세한 view of the Honeydukes shop entrance, brightly lit from within, showcasing the intricate details of the LEGO model.

Image: A close-up of the illuminated street lamp, adding a touch of realism to the Hogsmeade Village scene.

작동 지침

Once the BRIKSMAX LED Lighting Kit is fully installed and connected to a power source, operation is straightforward:

• 전원 켜기: If using the battery holder, ensure batteries are correctly inserted. If using the USB power cable, connect it to a powered USB port. The lights should illuminate automatically.
• 전원 끄기 : Disconnect the USB power cable from its source or remove the batteries from the battery holder.
• No Switches: This lighting kit typically does not include an on/off switch. Power is controlled by connecting or disconnecting the power source.

유지

• 청소: To clean the LED components or wires, gently wipe with a dry, soft cloth. Do not use liquids or abrasive cleaners.
• 와이어 검사: Periodically inspect wires for any signs of damage, fraying, or pinching. If damage is found, discontinue use and contact customer support.
• 저장: When not in use, store the LEGO model with the lighting kit in a cool, dry place away from direct sunlight and extreme temperatures. If using batteries, remove them before long-term storage.

문제 해결

If you encounter issues not covered here or require further assistance, please contact BRIKSMAX customer support.

명세서

• 모델 호환성: Designed for LEGO 76388 Hogsmeade Village Visit
• 전원: USB (5V) or AA Battery Holder (Batteries not included)
• 조명 유형: LED Dot Lights, LED Strip Lights
• Kit Dimensions (Packaging): 약 6.5 x 4.72 x 1.57cm(16.5 x 12 x 4인치)
• 제품 무게 (키트 기준): 약 8.2온스(232그램)
• 추천 연령: 8세 이상

보증 및 지원

BRIKSMAX is committed to providing high-quality products and customer satisfaction. If you experience any difficulties with your product, including missing parts, damaged components, or installation challenges, please contact our customer support team.

For assistance, please refer to the contact information provided in your physical user guide or visit the official BRIKSMAX website. We are dedicated to resolving any issues you may encounter.