SJoyBring 후면view 카메라 사용 설명서 (모델: B098NJLVWD)

1. 서론

The SJoyBring Rearview 이 카메라는 선명하고 넓은 화각을 제공하여 차량 안전을 향상시키도록 설계되었습니다. view of the area behind your vehicle. This manual will guide you through the setup, operation, and maintenance of your camera to ensure optimal performance.

주요 특징:

• 간편한 설치: Compatible with most 12V vehicles, the 1080P backup camera can be mounted on the front and rear license plate frames, ensuring quick and easy setup.
• Waterproof and Night Vision: Designed with fully sealed glue filling craft, the rearview camera is resistant to car washes, rainy days, and even storms, ensuring consistent performance. It also features night vision capabilities for low-light conditions.
• 170° 광각: The backup camera offers a 170° wide viewing angle with an adjustable angle, providing a broad vision and high-sensitive color for safe reversing and driving.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• SJoyBring 후면view 카메라
• 전원 케이블
• RCA Extension Cable (approx. 19.6 ft)
• 장착 나사(2개)
• 사용자 설명서

Image 1: Contents of the SJoyBring Rearview Camera package, including the camera, cables, and mounting hardware.

3. 설치 가이드

Follow these steps to properly install your SJoyBring Rearview Camera. Professional installation is recommended for optimal results.

3.1. 카메라 장착

The camera is designed for easy mounting on your vehicle's license plate frame. Ensure the camera has a clear, unobstructed view 차량 후면의.

1. Identify the optimal mounting location, typically above the license plate.
2. Use the provided screws to securely attach the camera bracket to the vehicle.
3. 원하는 각도로 카메라 각도를 조정하세요. view관점을 갖고 있습니다.

Image 2: The SJoyBring Rearview Camera mounted, illustrating its 170-degree wide-angle view 주차 지원을 위해.

3.2. Wiring the Camera to Your Car Stereo

This process involves connecting the camera to your car's head unit (stereo/monitor) and power source. Refer to the diagram below for visual guidance.

1. Connect the camera's video output (yellow RCA) to the "CAM IN" or "Video IN" port on your car stereo/monitor.
2. Locate the reverse line (or back line) on your car stereo's wiring harness. This wire typically signals the stereo to switch to the camera view 차량이 후진할 때.
3. Connect the red wire from the camera's power cable to the 12V+ positive terminal of your car's backup light.
4. Connect the black wire from the camera's power cable to the GND (ground) terminal of your car's backup light.
5. 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.

중요 참고 사항: The SJoyBring camera supports AHD video signal format (1280x720P 25fps or 1920x1080P 25fps). Before purchasing, verify that your car monitor or stereo supports the AHD format. If your monitor does not support AHD 1920x1080P, do not cut the white line on the camera cable.

4. 사용 설명서

4.1. 카메라 활성화

Once properly installed, the camera will automatically activate when your vehicle is shifted into reverse, displaying the rear view on your connected car stereo/monitor.

4.2. Adjusting Parking Guide Lines and Resolution

The camera features adjustable parking guide lines and resolution settings. These adjustments are typically made through the settings menu of your car's head unit.

• 가이드라인: The camera comes with parking guide lines. If you wish to remove them, cut the green wire on the camera cable. To make them reappear, keep the green wire intact.
• 해결: The camera supports 720P and 1080P resolutions. To switch to 1080P, cut the white wire on the camera cable. To revert to 720P, keep the white wire intact. After cutting, remember to restart your device and set up the reversing camera format in your head unit's settings.
• Adjusting Ruler Line: On certain head units, you can adjust the position and angle of the reversing ruler lines directly through the camera settings interface. Ensure to save any changes made.

Image 3: Comparison of the camera's view during day and night, highlighting its night vision capabilities.

5. 유지관리

To ensure the longevity and optimal performance of your SJoyBring Rearview Camera, follow these maintenance guidelines:

• 청소: 부드러운 천으로 카메라 렌즈를 정기적으로 청소하세요.amp 먼지, 흙 또는 물 얼룩을 제거하기 위한 천으로 막힘을 방지합니다. view. 연마성 세척제는 피하세요.
• 방수 디자인 : The camera is designed to be waterproof. However, avoid directing high-pressure water jets directly at the camera for extended periods during car washes.
• 케이블 검사: Periodically inspect all cables and connections for any signs of wear, damage, or loose connections. Secure or replace as necessary.
• 환경 조건: The camera is built to withstand various harsh weather conditions, including extreme temperatures. However, prolonged exposure to severe conditions may affect its lifespan.

6. 문제 해결

If you encounter any issues with your SJoyBring Rearview Camera, refer to the following troubleshooting tips:

• 화면이 나오지 않거나 검은 화면이 나타나는 경우:
  • Check all cable connections (video and power) to ensure they are secure.
  • Verify that your car stereo/monitor is set to the correct input source for the camera.
  • Ensure your car stereo/monitor supports the AHD video signal format. Incorrect format settings can lead to a black screen or interference. Adjust the camera settings (NTSC/PAL, AHD 720p/1080p) in your head unit if applicable.
  • Confirm the camera is receiving power (e.g., check the backup light connection).
• 이미지 간섭/왜곡:
  • 비디오 케이블이 헐거워지거나 손상되었는지 확인하십시오.
  • Ensure proper grounding of the camera's power cable.
  • Avoid routing video cables near high-voltag전선이나 기타 전기 간섭원.
  • Verify the correct video format (NTSC/PAL) is selected in your head unit's settings.
• Image Reversed (Left-to-Right):
  • Some car stereos have a "mirror image" or "left and right mirror images" setting in their reverse camera options. Adjust this setting to correct the image orientation.
• Parking Guide Lines Missing/Incorrect:
  • If the green wire was cut, the guide lines will disappear. Reconnect the green wire if you want them to appear.
  • Adjust the ruler line position and angle through your head unit's camera settings if supported.

7. 사양