Concept OPP1250SS Under-Cabinet Range Hood User Manual

1. 소개 및 이상view

This user manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your Concept OPP1250SS Under-Cabinet Range Hood. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Concept OPP1250SS is an ultra-slim 50cm under-cabinet range hood designed to effectively remove cooking odors and steam from your kitchen. It features LED lighting for improved visibility and push-button controls for ease of use.

그림 1: 전면 view of the Concept OPP1250SS Under-Cabinet Range Hood.

2. 안전 정보

일반 안전:

• 자격을 갖춘 사람이 기기를 올바르게 설치했는지 확인하십시오.
• Do not operate the range hood if it is damaged.
• 작동 중에는 어린이가 제품 가까이에 두지 않도록 하십시오.
• 화재 위험을 초래할 수 있는 기름때 축적을 방지하기 위해 필터를 정기적으로 청소하십시오.
• 가스나 기타 연료 연소 기기와 함께 레인지 후드를 동시에 사용할 경우 실내 환기가 적절히 이루어지도록 하세요.

전기 안전:

• 청소 또는 유지 보수를 하기 전에 항상 제품의 전원을 차단하십시오.
• 제품의 플러그를 뽑기 위해 전원 코드를 당기지 마십시오.
• 전원 코드가 손상된 경우 위험을 방지하기 위해 제조업체, 서비스 대리점 또는 이와 유사한 자격을 갖춘 사람이 교체해야 합니다.

3. 상자 안에 무엇이 들어있나요?

포장을 풀 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.

• 1x Concept OPP1250SS Under-Cabinet Range Hood
• 1x LED light bulb (6500 K) (pre-installed or separate)
• 2x Metallic anti-particulate filters (pre-installed)
• 사용 설명서 (본 문서)
• Mounting hardware (screws, wall plugs, etc. - check packaging for specifics)

4. 설정 및 설치

배치 요구 사항:

• The minimum distance above an electric hob is 65 cm.
• The minimum distance above a gas hob is 70 cm.
• Ensure the installation area allows for proper air circulation, especially if using the recirculation option.

설치 단계:

1. Carefully unpack the range hood and check for any damage.
2. Determine the desired mounting location under the cabinet, adhering to the minimum distance requirements from the hob.
3. Mark the drilling points for mounting the hood. Refer to the included mounting template (if provided) for precise measurements.
4. Drill the necessary holes and insert wall plugs.
5. Secure the range hood to the cabinet using the provided screws.
6. Connect the power supply. Ensure the power is off at the main circuit breaker before making any electrical connections.
7. If using the ducted extraction option, connect the 120mm diameter extraction duct to the outlet.
8. If using the recirculation option, ensure the carbon filters are installed (sold separately for some models) and the air outlet is clear for filtered air to return to the kitchen.

Figure 2: Dimensions of the Concept OPP1250SS Under-Cabinet Range Hood (Height: 82mm).

5. 사용 설명서

The Concept OPP1250SS features intuitive push-button controls located on the front panel.

Figure 3: Control panel of the range hood.

전원 켜기/끄기:

• Press the power button (usually marked with a circle and a vertical line) to turn the hood on or off.

팬 속도 선택:

• The hood offers 3 power levels. Press the corresponding fan speed buttons (often marked with I, II, III or fan symbols) to adjust the extraction power according to your cooking needs.
• Use lower speeds for light cooking and higher speeds for heavy frying or grilling.

LED 조명:

• Press the light button (usually marked with a light bulb symbol) to turn the LED illumination on or off. The LED light provides bright, energy-efficient lighting for your cooking surface.

6. 유지관리

정기적인 유지관리를 통해 최적의 성능과 레인지 후드의 수명을 보장할 수 있습니다.

Cleaning the Metallic Anti-Particulate Filters:

• The metallic filters capture grease and should be cleaned regularly (approximately every 2-4 weeks, depending on usage).
• To remove the filters, locate the release latches or handles and gently pull them down or slide them out.
• Clean the filters by hand using warm soapy water or in a dishwasher. Ensure they are completely dry before re-installing.
• Do not bend the filters during cleaning or re-installation.

Replacing Carbon Filters (for Recirculation Mode):

• If your hood is operating in recirculation mode, carbon filters (not included with all models) are used to remove odors. These filters cannot be washed and must be replaced every 3-6 months, depending on usage.
• Refer to the specific instructions provided with your carbon filters for replacement procedures.

Cleaning the Hood Exterior:

• 후드 외부 표면을 부드러운 천으로 닦으십시오.amp중성세제를 사용했습니다.
• 연마성 세척제, 부식성 세제 또는 거친 브러시를 사용하지 마십시오. 마감재가 손상될 수 있습니다.

Replacing the LED Bulb:

• Ensure the appliance is disconnected from the power supply before attempting to replace the bulb.
• Carefully remove the old LED bulb.
• Install a new LED bulb of the same type and wattage (1x LED lamp, 6500 K).

7. 문제 해결

If you encounter issues with your range hood, consult the following common troubleshooting tips:

• 후드가 켜지지 않음: Check if the power cord is securely plugged into the outlet and if the circuit breaker has tripped.
• 흡입력이 약함: Ensure the metallic filters are clean and not clogged. If using recirculation, check if the carbon filters need replacement. Verify that the ducting (if applicable) is not obstructed.
• 과도한 소음 : Check for loose components or obstructions in the fan. Ensure the hood is securely mounted.
• 조명이 작동하지 않음: Check if the LED bulb needs replacement. Ensure the light button is pressed.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

8. 사양

Figure 4: Energy Efficiency Label for the Concept OPP1250BC.

9. 보증 및 지원

Your Concept OPP1250SS Under-Cabinet Range Hood comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.

For technical support, spare parts, or warranty claims, please contact the Concept customer service department. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장.