DIGITUS 1D Barcode Scanner (Model DA-81001) User Manual

1. 제품 오버view

The Digitus 1D barcode scanner is designed for reliable and efficient barcode reading. Its ergonomic design ensures comfortable handling, making it suitable for various work environments such as retail, logistics, and commercial applications. The scanner performs 200 scans per minute and supports bi-directional scanning for optimal results. It is capable of reading high-resolution barcodes with up to 90 characters. Each successful scan is confirmed by both visual and acoustic signals. The device is built to be dust-proof and water-resistant (IP54), and its silicone case provides shock absorption to protect against damage.

주요 특징:

• Precise scanning of 1D barcodes.
• High-resolution scanning capability.
• 200 scans per minute, bi-directional operation.
• Supports barcodes up to 90 characters.
• Dust-proof and water-resistant (IP54) design.

2. 설정 가이드

Follow these steps to set up your DIGITUS 1D Barcode Scanner:

1. 스캐너 풀기: Carefully remove the barcode scanner and its USB RJ45 cable from the packaging.
2. 케이블 연결: Insert the RJ45 end of the cable into the port at the base of the scanner handle. Ensure it clicks securely into place.
3. 컴퓨터에 연결: Plug the USB-A end of the cable into an available USB port on your computer or host device.
4. 드라이버 설치: The scanner is typically plug-and-play (HID device) and should be recognized automatically by most operating systems without requiring additional driver installation. Wait for your system to confirm the device is ready for use.
5. 초기 테스트: Open a text editor or a compatible application on your computer and scan a test barcode to confirm proper functionality.

이미지: 하단 view of the scanner, highlighting the RJ45 port for cable connection.

3. 사용 설명서

To operate your DIGITUS 1D Barcode Scanner:

1. 스캐너를 잡으세요: Grip the scanner comfortably in your hand. The trigger button is located on the top of the handle.
2. Aim at Barcode: Point the scanner's reading window towards the barcode you wish to scan. Ensure the red laser line covers the entire barcode.
3. 방아쇠를 당기세요: Press and hold the trigger button. The scanner will emit a red laser line.
4. 스캔 확인: Upon a successful scan, the scanner will emit an audible beep and a visual indicator (e.g., an LED light) will flash. The barcode data will be transmitted to your connected computer as if typed from a keyboard.
5. Bi-directional Scanning: The scanner supports bi-directional scanning, meaning it can read barcodes regardless of the orientation of the scanner relative to the barcode.
6. 스캐닝 거리: Maintain an appropriate distance from the barcode, typically a few centimeters, for optimal reading performance.

Image: User holding the scanner and aiming at a barcode on a package.

4. 유지관리 및 관리

적절한 유지 관리는 스캐너의 수명과 성능을 보장합니다.

• 청소: The scanner is dust-proof and water-resistant (IP54). To clean the exterior, use a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the scanning window is kept clean and free of smudges or debris for accurate reading.
• 케이블 관리: Avoid bending or twisting the USB RJ45 cable excessively. Do not pull the cable to disconnect it; always grasp the plug.
• 저장: 사용하지 않을 때는 스캐너를 극한 온도와 직사광선을 피해 깨끗하고 건조한 곳에 보관하세요.
• 충격 보호: While the silicone case provides shock absorption, avoid dropping the scanner or subjecting it to severe impacts.

5. 문제 해결

스캐너에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

• 스캐너 전원이 켜지지 않음:
  • USB 케이블이 스캐너와 컴퓨터에 단단히 연결되어 있는지 확인하세요.
  • 스캐너를 컴퓨터의 다른 USB 포트에 연결해보세요.
  • 컴퓨터의 USB 포트가 정상적으로 작동하는지 확인하십시오.
• 스캐너가 바코드를 읽지 못함:
  • Ensure the barcode is a 1D type. This scanner does not read 2D barcodes (like QR codes).
  • Check that the scanning window is clean and free from obstructions.
  • 스캐너와 바코드 사이의 거리와 각도를 조정하세요.
  • Ensure the barcode itself is not damaged or poorly printed.
  • Confirm the scanner is properly connected and recognized by your computer.
• 컴퓨터로 데이터 전송 없음:
  • After a successful scan (audible beep and visual confirmation), ensure your cursor is active in a text field or application where data input is expected.
  • Restart your computer and reconnect the scanner.
  • Check your computer's device manager to ensure the scanner is listed and has no error indicators.

6. 기술 사양

7. 보증 및 지원 정보

For warranty details and technical support, please refer to the documentation included with your product or visit the official Digitus website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

For further assistance, contact Digitus customer support through their official channels.