Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. 서론

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. 안전 정보

• 구성 요소를 설치하거나 제거하기 전에 항상 벽면 콘센트에서 전원 공급 장치를 분리하세요.
• 정전기로 인한 손상을 방지하기 위해 모든 구성품을 조심스럽게 다루십시오. 정전기 방지 손목 스트랩 사용을 고려해 보세요.
• 케이스 내부의 날카로운 모서리에 주의하세요.
• 작은 부품과 나사는 어린이의 손이 닿지 않는 곳에 보관하십시오.
• 조립된 PC 주변의 환기를 적절히 하여 과열을 방지하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• 액세서리 상자(나사, 스탠드오프, 케이블 타이 등이 들어 있음)
• 사용 설명서 (본 문서)

4. 제품 오버view

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

주요 특징:

• 마더보드 지원: Compatible with ATX, Micro-ATX, and ITX motherboards.
• 냉각: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• 먼지 필터링: Equipped with a magnetic anti-dust mesh on the top panel.
• 저장: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• 사이드 패널 : Tempered glass side panels for an aesthetic view 내부 구성 요소.

그림 4.1: 전면 view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

그림 4.2: 상향식 view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. 설정 및 설치

5.1 측면 패널 제거하기

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 마더 보드 설치

1. 메인보드와 함께 제공된 I/O 쉴드를 케이스 뒷면의 개구부에 설치하십시오.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. 부속품 상자에 들어 있는 적절한 나사를 사용하여 마더보드를 고정하십시오.

5.3 전원 공급 장치(PSU) 설치

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 저장 드라이브 설치

• 3.5인치 HDD: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5인치 SSD: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 그래픽 카드 및 확장 카드

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 케이블 관리

마더보드 트레이 뒤쪽의 케이블 라우팅 컷아웃과 고정 지점을 활용하여 케이블을 정리하세요. 이렇게 하면 공기 흐름이 원활해지고 외관도 깔끔해집니다.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. 사용 설명서

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

그림 6.1: 클로즈업 view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. 유지관리

• 먼지 필터 청소: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• 일반 청소: 부드러운 d를 사용하세요amp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• 내부 먼지 제거: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. 문제 해결

8.1 Computer Does Not Power On

• 전원 케이블이 파워서플라이와 벽면 콘센트에 제대로 연결되어 있는지 확인하십시오.
• 파워서플라이 스위치가 '켜짐' 위치에 있는지 확인하십시오.
• 전면 패널 전원 스위치 케이블이 마더보드 헤더에 올바르게 연결되어 있는지 확인하세요.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 과열 문제

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• 먼지 필터와 내부 부품을 정기적으로 청소하십시오.
• CPU 쿨러와 GPU 팬이 제대로 작동하는지 확인하십시오.

9. 사양

10. 보증 및 지원

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.