1. 서론
This manual provides essential information for the installation, operation, and maintenance of your ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card. Please read this guide thoroughly before installation to ensure proper setup and optimal performance.
1.1개 제품 이상view
The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo is a high-performance graphics card built on the NVIDIA Ampere architecture. It features enhanced RT Cores and Tensor Cores, new streaming multiprocessors, and 24GB of GDDR6X memory, designed for demanding gaming and professional applications.
1.2 주요 특징
- 엔비디아 Ampere architecture with 2nd Gen Ray Tracing Cores and 3rd Gen Tensor Cores
- 24GB 384-bit GDDR6X memory, 19.5 Gbps
- PCIe 4.0 interface
- HoloBlack design with SPECTRA 2.0 RGB Lighting
- IceStorm 2.0 Advanced Cooling system
- FREEZE Fan Stop and Active Fan Control
- PowerBoost technology
- Dual BIOS functionality
- Metal Frontplate and Lighted Backplate
- 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready
2. 패키지 내용
아래 나열된 모든 품목이 제품 패키지에 포함되어 있는지 확인하세요.
- ZOTAC 게이밍 지포스 RTX 3090 AMP Extreme Holo graphics card
- 3x Dual 6-pin to 8-pin power adapter (if applicable)
- ZOTAC GAMING RGB GPU Support Bracket
- 3-pin RGB Header cable
- 사용 설명서 (본 문서)
Image: Package contents including the graphics card, support bracket, and various cables.
Image: The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card alongside its retail packaging.
3. 설정
3.1 시스템 요구 사항
- 마더보드: PCI 익스프레스 4.0 x16 슬롯
- 전원 공급 장치: 800와트 전원 공급 장치 권장
- 운영 체제: Windows 10 64비트(빌드 2004 이상)
- 메모리: Minimum 8GB system RAM (16GB recommended)
- 저장: 1.5GB available hard-disk space
3.2 하드웨어 설치
- 시스템 준비: 컴퓨터 전원을 끄고 모든 케이블을 분리하세요. 컴퓨터 케이스를 여세요.
- PCIe 슬롯 찾기: Identify an available PCI Express 4.0 x16 slot on your motherboard. Remove any expansion slot covers that obstruct the installation.
- 그래픽 카드 설치: Carefully align the graphics card with the PCIe slot and press down firmly until it is securely seated. Secure the card to the chassis with a screw.
- 전원 연결: Connect three 8-pin PCIe power connectors from your power supply to the corresponding ports on the graphics card. Ensure all connections are firm. If your power supply does not have three 8-pin connectors, use the provided 6-pin to 8-pin adapters.
- Install GPU Support Bracket: Attach the ZOTAC GAMING RGB GPU Support Bracket to prevent card sag, following the instructions provided with the bracket. Connect the 3-pin RGB Header cable from the bracket to the graphics card's RGB header.
- 사건 종결: 컴퓨터 케이스를 닫고 모든 케이블을 다시 연결하십시오.
3.3 드라이버 설치
After hardware installation, you must install the latest NVIDIA drivers for your graphics card. These drivers are crucial for optimal performance and stability.
- 드라이버 다운로드: NVIDIA 공식 웹사이트를 방문하세요. web사이트 (www.nvidia.com/drivers) and download the latest Game Ready Drivers for the GeForce RTX 3090.
- 드라이버 설치: Run the downloaded installer and follow the on-screen instructions. A restart may be required after installation.
- NVIDIA GeForce Experience: Consider installing NVIDIA GeForce Experience for automatic driver updates, game optimization, and other features.
4. 그래픽 카드 작동 방법
4.1 디스플레이 연결
The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo supports up to four simultaneous displays. Connect your monitors to the available ports:
- DisplayPort 1.4a 3개 (최대 7680x4320@60Hz)
- 1 x HDMI 2.1 (up to 7680x4320@60Hz)
Image: Display output ports on the graphics card, including DisplayPort and HDMI.
4.2 Software Features and Customization
Utilize ZOTAC's FireStorm utility for advanced control and customization of your graphics card.
- SPECTRA 2.0 RGB 조명: Customize the RGB lighting effects on your card and the RGB GPU Support Bracket.
- IceStorm 2.0 고급 냉각 기능: Monitor fan speeds and temperatures.
- Active Fan Control with FREEZE Fan Stop: Configure fan behavior, including stopping fans at low temperatures for silent operation.
- 듀얼 BIOS: Switch between different BIOS profiles for performance or silent modes.
- 파워 부스트: Manage power delivery settings for enhanced stability.
Image: The graphics card's backplate featuring SPECTRA 2.0 RGB lighting.
이미지: 각도 view 그래픽 카드의 경우, 표시됨asing the triple-fan IceStorm 2.0 cooling system and RGB accents.
5. 유지관리
5.1 청소
정기적인 청소는 최적의 성능을 유지하고 그래픽 카드의 수명을 연장하는 데 도움이 됩니다.
- 전원 끄기 : 청소하기 전에 항상 컴퓨터 전원을 끄고 전원 콘센트에서 플러그를 뽑으세요.
- 먼지 제거: Use compressed air to gently remove dust from the fans, heatsink fins, and other components. Hold the fans in place to prevent over-spinning.
- 표면 청소: 부드럽고 보풀이 없는 천을 살짝 사용하십시오. dampened with isopropyl alcohol to clean the card's exterior surfaces. Avoid getting liquid into connectors or components.
5.2 펌웨어 업데이트
Periodically check the ZOTAC support website for any available firmware updates for your graphics card. Firmware updates can improve performance, stability, or add new features.
6. 문제 해결
그래픽 카드에 문제가 발생하면 다음과 같은 일반적인 문제 해결 단계를 고려해 보세요.
- 디스플레이 출력 없음: Ensure the monitor cable is securely connected to the graphics card and the monitor. Verify that the graphics card is fully seated in the PCIe slot and all power connectors are attached. Try a different display output port or cable.
- 드라이버 문제: Reinstall the latest NVIDIA drivers. Use Display Driver Uninstaller (DDU) in Safe Mode to completely remove old drivers before installing new ones.
- 시스템 불안정/충돌: Check your power supply wattage to ensure it meets the recommended 800W. Monitor GPU temperatures using ZOTAC FireStorm or other utilities to ensure it's not overheating. Ensure your system BIOS is up to date.
- 팬 소음/오작동: Check for any obstructions in the fan blades. Ensure Active Fan Control settings are configured correctly in FireStorm.
- RGB 조명 문제: Verify the 3-pin RGB Header cable is correctly connected. Check settings within ZOTAC FireStorm software.
For persistent issues, refer to the ZOTAC support web사이트 또는 기술 지원팀에 문의하세요.
7. 기술 사양
이미지: 상단 view of the graphics card, highlighting the IceStorm 2.0 triple-fan cooling solution.
| 특징 | 사양 |
|---|---|
| 그래픽 카드 | 엔비디아 지포스 RTX 3090 |
| CUDA 코어 | 10496 |
| 비디오 메모리 | 24GB GDDR6X |
| 메모리 버스 | 384비트 |
| 엔진 부스트 클럭 | 1815MHz |
| 메모리 클록 | 19.5Gbps |
| PCI 익스프레스 | 4.0 16배 |
| 디스플레이 출력 | 3 x 디스플레이포트 1.4a, 1 x HDMI 2.1 |
| HDCP 지원 | 2.3 |
| 멀티 디스플레이 기능 | Quad Display Capable |
| 추천 전원 | 800와트 |
| 전력 소비 | 맥스 맥스 맥스 |
| 전원 입력 | 3 x 8핀 |
| 카드 크기 (가로 x 세로 x 두께) | 355.9mm x 145.7mm x 59.7mm (3 slot) |
| 운영 체제 지원 | Windows 10 64비트(빌드 2004 이상) |
| DirectX 지원 | 12 얼티밋 |
| OpenGL 지원 | 4.6 |
| 불칸 API | RT API |
8. 보증 정보
ZOTAC products are covered by a limited warranty. The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo may be eligible for an extended warranty upon product registration. Please refer to the official ZOTAC website for the most current and detailed warranty terms and conditions, including registration requirements and regional variations.
중요한: Any modification or improper use of the product may void the warranty.
9. 지원
For customer service, technical support, or general inquiries regarding your ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card, please visit the dedicated support page on the official ZOTAC web대지:
The support page offers FAQs, driver downloads, and contact information for technical assistance.
