1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AZ300 Mid-Tower Computer Case. Please read this guide thoroughly before beginning assembly to ensure proper setup and optimal performance.
Figure 1: aigo AZ300 Mid-Tower Computer Case, showcasing its tempered glass panels and spacious interior.
2. 주요 특징
- 강화 유리 패널: Two 4mm-thick tempered glass panels provide a full view 내부 구성 요소의 일부입니다.
- 마더보드 호환성: Supports ATX and Micro-ATX motherboards.
- 냉각 시스템 지원: Flexible configuration for water coolers with radiators of 360mm, 240mm, and 120mm.
- 저장 옵션 : Accommodates 2 x 2.5" SSDs and 2 x 3.5" HDDs.
- GPU 정리: Maximum GPU length of 400mm.
- 먼지 필터링: Equipped with two dust filters, including a top magnetic strip filter and a bottom PSU filter for easy maintenance.
- 전면 I/O 패널: Includes 1 x Type-C Port, 1 x USB 2.0 Port, 1 x USB 3.0 Port, 2 x HD Audio jacks, Power button, and Reset button (with LED).
3. 설정 및 설치
Follow these steps for proper assembly and installation of components within your aigo AZ300 computer case.
3.1 컴포넌트 오버view
Figure 2: Internal component layout and compatibility for the aigo AZ300 case. This diagram illustrates placement for ITX, M-ATX, and ATX motherboards, HDD/SSD drives, PSU, and various fan/radiator sizes (120mm, 240mm, 360mm).
3.2 마더 보드 설치
The aigo AZ300 supports ATX and Micro-ATX motherboards. Ensure standoffs are correctly aligned for your motherboard size before securing it with screws.
Figure 3: Motherboard mounting areas within the case, indicating support for ITX, M-ATX, and ATX form factors.
3.3 저장 드라이브 설치
Install up to two 2.5" SSDs and two 3.5" HDDs in the designated bays. Refer to Figure 2 for drive locations.
3.4 냉각 시스템 구성
The case supports various cooling configurations. Radiators of 360mm, 240mm, and 120mm can be installed in designated areas. Ensure proper airflow for optimal cooling performance.
비디오 1: 끝view of the aigo AZ300 Computer Case, demonstrating its features and potential cooling setups.
3.5 전원 공급 장치(PSU) 설치
Install the PSU in the bottom mount area. Ensure all cables are routed efficiently for clean cable management and unobstructed airflow.
4. 사용 설명서
The front I/O panel provides convenient access to essential functions and ports.
Figure 4: Front I/O Panel layout, detailing the Type-C, USB 2.0, USB 3.0, Headset, Microphone, Reset/LED, and Power connections.
- 전원 버튼: Press to power on or off your computer.
- Reset/LED Button: Press to reset the computer or cycle through LED lighting modes (if applicable).
- USB 포트: Connect USB devices to the Type-C, USB 2.0, or USB 3.0 ports. The USB cables are shielded for interference-free data transmission.
- HD 오디오 잭: Connect your headset and microphone to the respective audio jacks.
5. 유지관리
정기적인 유지 관리는 컴퓨터 케이스의 최적 성능과 수명 연장을 보장합니다.
5.1 먼지 필터 청소
The aigo AZ300 case is equipped with two dust filters to prevent dust accumulation. The top magnetic strip dust filter and the bottom PSU dust filter are designed for easy removal and cleaning.
- Gently remove the magnetic top filter for cleaning.
- Slide out the bottom PSU filter for cleaning.
- Clean filters with a soft brush or by rinsing with water (ensure they are completely dry before reinstallation).
Figure 5: Top magnetic dust filter, designed for easy removal and cleaning.
6. 문제 해결
If you encounter any issues during the installation or operation of your aigo AZ300 computer case, please review the following general tips:
- 전원 문제: Ensure all power cables are securely connected to the motherboard, GPU, and power supply unit. Verify the PSU switch is in the "ON" position.
- 구성 요소 호환성: Double-check that all components (motherboard, GPU, drives) are correctly seated and secured according to their respective manuals.
- I/O Panel Functionality: Confirm that the front I/O panel cables are properly connected to the motherboard headers.
- 과열: Ensure all fans are spinning correctly and are oriented to provide adequate airflow. Clean dust filters regularly.
추가 지원이 필요하면 보증 및 지원 섹션을 참조하세요.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | Aigo 사와 |
| 모델명 | AZ300 |
| 케이스 유형 | 미드 타워 |
| 마더보드 호환성 | ATX, 마이크로 ATX |
| 재료 | 강화 유리 |
| 품목 무게 | 19.66파운드 |
| 패키지 크기 | 21 x 20 x 16 인치 |
| USB 2.0 포트 수 | 1 |
| USB 3.0 포트 수 | 1 |
| Number of USB Type-C Ports | 1 |
| 냉각 방식 | 공기 |
| 전원 공급 장치 장착 유형 | 바텀 마운트 |
8. 보증 및 지원
aigo is committed to providing excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please do not hesitate to contact us. We will endeavor to provide prompt assistance and resolve any concerns you may have.
For support, please visit the official aigo store or contact their customer service channels.