NEO Z-Wave Plus 사이렌 경보 NAS-AB02ZU-G 사용 설명서

1. 서론

The NEO Z-Wave Plus Siren Alarm is an intelligent device designed to enhance home security and automation systems. It integrates with Z-Wave controller gateways to provide audible alarms and visual strobe alerts in response to various home events. This device can associate with other Z-Wave notification sensors, such as motion sensors, door/window sensors, water leakage sensors, and smoke sensors, to trigger alerts.

Ensure your Z-Wave controller supports Z-Wave Plus devices for optimal functionality.

2. 제품 오버view

The NEO Z-Wave Plus Siren Alarm combines audio and visual alerts with flexible power options and smart home integration capabilities.

그림 1: 앞쪽 view of the NEO Z-Wave Plus Siren Alarm, showcasing its compact design with a central speaker grille and a blue LED ring.

그림 2: Diagram illustrating key features including high-dB ringing, flashing alarm, trigger alarm, push notification support, Micro-USB power, and unique appearance.

3. 특징

• Audio & Visual Alerts: Provides distinct chimes and alarms accompanied by a flashing red LED for various home events.
• 이중 전원 공급 장치: Supports both battery power (2 CR123A batteries, included) and USB charging (6V, 0.5A). The device reports low power when voltage는 4.5V와 6V 사이입니다.
• 사용자 지정 가능한 일정: Allows for the creation of daily audio schedules for reminders or notifications.
• Emergency Integration: Connects with other Z-Wave safety devices to provide immediate alerts for events like broken glass, unlocked safes, smoke detection, or floods.
• Adjustable Configurations: Advanced parameters enable control over alarm duration, volume, and tone. Custom code may be required for full functionality with SmartThings.
• Z-Wave Plus 기술: Offers improved battery consumption, extended signal range, and enhanced connectivity. Compatible with SmartThings (refer to setup for details).

그림 3: The siren alarm's compact size, shown held in a hand, highlighting its small and portable design.

그림 4: Illustration demonstrating the 100dB loud alarm capability of the device, with sound waves emanating from it.

4. 사양

5. 설정

5.1 장치 전원 공급

The siren alarm can be powered using two methods:

1. 배터리 전원: Insert the two included CR123A batteries into the battery compartment. Ensure correct polarity.
2. USB 전원 : Connect a Micro-USB cable (not included) to the device and a 6V, 0.5A USB power adapter (not included).

The device will report low power when the battery voltage drops between 4.5V and 6V.

그림 5: The siren alarm connected via USB power, illustrating the dual power supply options (USB and battery).

5.2 Z-Wave 네트워크 연결(페어링)

To integrate the siren alarm into your Z-Wave network:

1. Place your Z-Wave controller or gateway into inclusion/pairing mode. Refer to your controller's manual for specific instructions.
2. Follow the device-specific instructions (usually a button press sequence) to put the siren alarm into pairing mode.
3. Once successfully paired, the siren alarm will appear in your Z-Wave controller's device list.

Important Compatibility Note for SmartThings Users:

• The NEO Z-Wave Plus Siren Alarm is designed to work with SmartThings.
• For access to all advanced features, including customizable chimes, volume, and tone adjustments, the SmartThings Classic app and a custom device handler (DTH) are required.
• The newer SmartThings app and Edge platform may not fully support all advanced features without a compatible DTH, which may no longer be manually addable. The device may function as a basic siren in these newer environments.
• 이 장치는 호환되지 않음 with Wink, Ring, Iris, or certain alarm panels like Vivint (unless custom actions are configured on the panel, which is not officially supported by NEO).

6. 사용 설명서

Once successfully paired with your Z-Wave gateway, the siren alarm can be controlled and configured through your Z-Wave controller's interface or associated smart home application.

6.1 Triggering Alarms and Chimes

The siren alarm can be triggered by various events configured within your Z-Wave network. This typically involves:

• Association with Sensors: Link the siren alarm to other Z-Wave sensors (e.g., motion, door/window, smoke, water leak) so that when a sensor is triggered, the siren activates.
• 장면 활성화: Include the siren alarm in smart home scenes or routines that activate under specific conditions (e.g.,

  관련 문서 - NAS-AB02ZU-G

  	NEO SOS/원격 제어 사용 설명서 - Z-Wave 보안 장치 Z-Wave Plus 인증 보안 장치인 NEO SOS/리모컨의 종합 사용 설명서입니다. Shenzhen NEO Electronics Co., Ltd.의 기능, 기술 사양, 설치, 작동, 고급 구성 및 보증에 대해 알아보세요.
  	NEO NAS-CW01W6 스마트 시계: 온도, 습도 및 조도 모니터 사용 설명서 NEO NAS-CW01W6 스마트 시계에 대한 자세한 사용 설명서입니다. 설정, 기능, 사양, 그리고 온도, 습도, 주변광 모니터링을 위한 앱 연동 방법을 다룹니다. FCC 규정 준수 정보도 포함되어 있습니다.
  	NEO Matter Smart Power Plug Instruction Manual Detailed instructions for setting up and using the NEO Matter Smart Power Plug. Covers specifications, installation, compatibility, and integration with Tuya, Apple Home, Google Home, and Amazon Alexa smart home platforms.
  	NEO Stormer Lite RGB LED 1000W Colouring Strobe User Manual User manual for the NEO Stormer Lite, a 1000W RGB LED Colouring Strobe light. Details menu functions, DMX addressing, and technical specifications for operation and setup.
  	NEO Zigbee 온도 및 습도 센서 NAS-TH02B2 사용 설명서 | 스마트 홈 모니터링 NEO NAS-TH02B2 지그비 온도 및 습도 센서 사용 설명서입니다. 이 스마트 홈 기기를 설정, 구성 및 사용하여 실시간 환경 모니터링을 수행하는 방법을 알아보세요.
  	NEO Wi-Fi 스마트 워터 밸브 사용 설명서 NEO Wi-Fi 스마트 정수 밸브(모델 NAS-WV02W)의 사용 설명서에는 스마트 홈 정수 관리를 위한 설치, 앱 설정, 제품 사양, 기능 및 작동 방법이 자세히 설명되어 있습니다.