1. 서론
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your XPG DDR4 D50 RGB Desktop Memory Kit. This high-performance memory kit is designed to enhance your system's speed and responsiveness, featuring customizable RGB lighting and support for advanced overclocking profiles.
Figure 1.1: XPG DDR4 D50 RGB Memory Modules
The image displays two XPG DDR4 D50 RGB memory modules, showcasing their sleek grey heatsink design and the vibrant RGB light bar along the top edge.
2. 설정 및 설치
Before installing the memory modules, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to your components.
2.1 시스템 호환성
This DDR4 288-Pins U-DIMM memory kit is compatible with most desktop PC motherboards. It specifically supports new Intel X299 platforms and AMD X570 chipsets. Always refer to your motherboard's manual for specific memory slot configurations and maximum supported memory capacity.
2.2 물리적 설치
- 시스템 준비: Power down your computer and disconnect all cables. Open your computer case.
- 메모리 슬롯 위치 찾기: Identify the DDR4 memory slots on your motherboard. These are typically long slots with clips on either end.
- 열린 클립: Gently push the clips on both ends of the memory slot outwards to open them.
- 메모리 모듈 정렬: Align the notch on the bottom edge of the memory module with the key in the memory slot. Ensure the module is oriented correctly.
- 모듈 삽입: Place the module into the slot and press down firmly on both ends simultaneously until the clips snap into place, securing the module.
- 추가 모듈에 대해서도 동일한 과정을 반복하십시오. If installing multiple modules, repeat the process for the remaining slots, following your motherboard's dual-channel or quad-channel configuration guidelines.
- 케이스를 닫고 전원을 켜세요: 컴퓨터 케이스를 닫고 모든 케이블을 다시 연결한 다음 시스템 전원을 켜십시오.
Figure 2.1: XPG DDR4 D50 RGB Memory Kit
This image shows an angled perspective of two XPG DDR4 D50 RGB memory modules, highlighting their metallic heatsinks and the XPG branding.
3. 사용 설명서
3.1 XMP(Extreme Memory Pro) 활성화file)
To achieve the advertised speeds of your XPG DDR4 D50 RGB memory, you must enable the Extreme Memory Profile (XMP) in your system's BIOS. By default, newly installed RAM kits operate at JEDEC standard speeds, which are lower than the advertised XMP speeds.
Figure 3.1: Extreme Memory Profile (XMP)
This graphic emphasizes the "Extreme Memory Profile XMP" feature, showing multiple XPG RGB RAM sticks glowing with various colors installed in a motherboard.
Steps to Enable XMP in BIOS:
- BIOS/UEFI로 들어가세요: Restart your computer and repeatedly press the designated key (commonly Del, F2, F10, or F12) during startup to enter the BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
- Locate OC Settings: Navigate to the "OC" (Overclocking) or "Advanced Memory Settings" section within the BIOS.
- Enable XMP Profile: Find the "Extreme Memory Profile (XMP)" option. It might be labeled as "A-XMP" for AMD systems or simply "XMP Profile". Select "Enabled" or choose the desired XMP profile (e.g., Profile 1 또는 프로file 2 if multiple are available).
- 저장 및 종료: Save your changes and exit the BIOS. Your system will then reboot.
- Verify Speed: After rebooting, you can re-enter the BIOS or use system information software within your operating system to confirm that the memory is now running at the advertised XMP speed (e.g., 3600MHz or higher, depending on the profile).
Video 3.1: How to Set Up XMP Profile BIOS에서
This video from XPG (ADATA) provides a step-by-step guide on how to enable the XMP (Extreme Memory Profile) in your computer's BIOS to achieve optimal memory speeds. It demonstrates the process using an MSI motherboard, showing how to navigate to the OC settings, enable XMP, and verify the increased DDR speed after rebooting.
3.2 RGB 조명 사용자 정의
The XPG D50 RGB memory features customizable RGB lighting effects. You can control these effects using the XPG RGB Sync App or compatible RGB software from major motherboard manufacturers (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
그림 3.2: 사용자 정의 가능한 RGB 조명
A close-up shot of the XPG DDR4 D50 RGB memory modules, highlighting the bright and colorful illumination from the RGB light bar, showcasin사용자 정의 가능한 조명 효과.
4. 유지관리
XPG DDR4 D50 RGB memory modules are designed for durability and require minimal maintenance.
- 손질: Always handle memory modules by their edges to avoid touching the gold contacts or the integrated circuits.
- 청소: If necessary, gently clean the heatsinks with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- 환경: Ensure your computer case has adequate airflow to prevent excessive heat buildup, which can affect memory performance and longevity.
Figure 4.1: Solid Heatsink Construction
This image highlights the robust "Solid Heatsink Construction" of the XPG DDR4 D50 RGB memory module, designed for effective heat dissipation and enhanced durability.
5. 문제 해결
If you encounter issues with your XPG DDR4 D50 RGB memory, refer to the following common troubleshooting steps:
- 시스템이 부팅되지 않음 / 화면이 표시되지 않음:
- 메모리 모듈이 슬롯에 완전히 장착되었는지 확인하세요. 다시 단단히 장착하세요.
- Verify that the memory modules are installed in the correct slots according to your motherboard's manual for optimal configuration.
- Test modules individually if you have multiple, to identify a potentially faulty stick.
- Advertised RAM Speed Not Showing (e.g., 3600MHz):
- By default, newly installed RAM kits operate at JEDEC standard speeds. To run at the advertised speed, you must enable and change your XMP profile in BIOS. Refer to Section 3.1 for detailed instructions.
- 시스템 불안정/충돌:
- Ensure your motherboard BIOS is updated to the latest version, as this can improve memory compatibility and stability.
- If XMP is enabled, try disabling it to see if stability improves. If it does, your system might require manual tuning or a different XMP profile.
- Check for proper cooling within your PC case to prevent overheating of components.
6. 사양
Below are the key specifications for the XPG DDR4 D50 RGB 16GB (2x8GB) 3600MHz Memory Kit:
| 특징 | 사양 |
|---|---|
| RAM 용량 | 16GB(2x8GB) |
| 램 종류 | DDR4 U-DIMM |
| 메모리 속도 | 3600MHz(PC4-28800) |
| CAS 대기 시간 | CL18-22-22 |
| 권tage | 1.2 Volts (Standard) |
| 다리 | 288핀 |
| 색상 | Grey Heatsink RGB |
| 치수(길이x너비x높이) | 5.25 x 1.57 x 0.31 인치 |
| 호환 장치 | 데스크탑 PC |
7. 보증 및 지원
7.1 보증 정보
XPG provides a 제한된 평생 보증 for the DDR4 D50 RGB memory modules. This warranty covers defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please visit the official XPG web대지.
7.2 고객 지원
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XPG customer support through their official website. You may find FAQs, drivers, and contact information on their support pages.
