YABER YA30 4-in-1 Car Battery Jump Starter User Manual

1. 서론

The YABER YA30 is a versatile 4-in-1 emergency tool designed for automotive and outdoor use. It functions as a powerful car battery jump starter, a portable air compressor, a high-capacity power bank, and an emergency LED light. This manual provides detailed instructions for safe and effective operation of your device.

2. 안전 정보

본 제품을 사용하기 전에 모든 안전 경고 및 사용 설명서를 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.

• Do not use the jump starter if the battery level is below 50% for optimal performance and safety.
• Ensure proper polarity when connecting the smart clamps to the vehicle battery (Red to positive, Black to negative).
• Disconnect the smart clamps from the vehicle battery within 30 seconds after the engine starts.
• 스마트클럭을 단락시키지 마십시오.amps by connecting the red and black clamp함께요.
• 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
• Do not expose the device to extreme temperatures (outside -20°C to 60°C) or direct sunlight for extended periods.
• 장치를 분해하거나 개조하지 마세요.
• 스마트 클amps feature multiple protection systems, including reverse polarity, short circuit, over-current, over-discharge, over-charge, input low-voltag예, 고용량 입력tage, and high-temperature protection.

이미지: 스마트 클amps Protection. This image illustrates the various safety features integrated into the smart clamps, such as protection against short circuits, reverse polarity, and high temperature, ensuring safe operation.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x YABER YA30 4-in-1 Car Battery Jump Starter
• 1 x Smart Jump Cable with Clamps
• 1 x 12V DC Cigarette Lighter Adapter
• 1 x USB-C 충전 케이블
• 3 x Pump Adapters (for various inflatables)
• 1 x 사용자 설명서
• 1 x 운반 케이스

Image: Package Contents. This image displays all the items included in the YABER YA30 product box, such as the jump starter unit, smart clamps, various cables, pump adapters, and the carrying case.

4. 제품 오버view

The YABER YA30 integrates multiple functions into a compact and robust design. It features a main unit with an air compressor, an LCD display for battery status, control buttons, and various ports for charging and power output. The smart clamps provide secure and protected connections for jump starting.

Image: YABER YA30 Main Unit. This image provides a general view of the YABER YA30 device, highlighting its robust design, integrated air compressor, and the smart jump starter clamps.

5. 장치 충전

Before first use, fully charge the YABER YA30. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

1. Connect the USB-C charging cable to the input port on the YABER YA30.
2. Connect the other end of the USB-C cable to a 5V/2A (or higher) USB wall adapter (not included).
3. The LCD display will show the charging progress. A full charge typically takes approximately 6-8 hours.

6. 사용 설명서

6.1. 차량 점프 스타트

The YABER YA30 can jump start 12V vehicles with all gas engines or diesel engines up to 8.0L.

1. 점프 스타터의 배터리 잔량이 최소 50% 이상인지 확인하십시오.
2. Insert the plug of the smart clip into the jump starter's port.
3. 빨간색(+) cl을 연결합니다.amp 차량 배터리의 양극 단자에 연결합니다.
4. 검은색(-) cl을 연결합니다.amp 차량 배터리의 음극 단자에 연결합니다.
5. Once connected, the smart clip's indicator light will show the status. If it's green, proceed. If it's red or beeping, check connections or refer to troubleshooting.
6. 차량의 엔진을 시동하세요.
7. 엔진 시동이 걸리면 즉시 검은색 (-) 플러그를 제거하십시오.amp, 그러면 빨간색 (+) clamp 차량 배터리에서.
8. Disconnect the smart clip from the jump starter.

Image: How to Start Your Car. This image provides a step-by-step visual guide on how to properly connect the YABER YA30 to a car battery for jump starting, and the sequence of operations.

6.2. 에어 컴프레서 사용

The integrated air compressor can inflate tires up to 150 PSI and features an automatic shut-off when the preset pressure is reached.

1. 공기 호스를 타이어 밸브에 연결합니다.
2. Press the 'R' button on the compressor display to turn it on.
3. Use the 'R' button to cycle through pressure units (PSI, BAR, KPA, kg/cm²).
4. Use the '+' and '-' buttons to set the desired pressure.
5. Press the 'AIR' button to start inflation. The compressor will automatically stop when the preset pressure is reached.
6. For continuous operation, the compressor should rest for 10 minutes after 10 minutes of use to prevent overheating.
7. Use the included adapters for inflating balls, air mattresses, and other inflatables.

Image: Tyre Inflator Function. This image demonstrates the YABER YA30's air compressor in action, showing it connected to a car tire and highlighting its digital display and automatic stop feature.

6.3. 보조배터리로 사용하기

The YA30 features a 24800 mAh power bank with USB and 12V DC outputs for charging electronic devices.

1. Press the 'On/Off Light' button to activate the power bank function. The LCD screen will illuminate.
2. Connect your electronic device (phone, tablet, etc.) to one of the USB output ports using a compatible USB cable.
3. For 12V devices (e.g., car vacuum cleaner), connect the 12V DC cigarette lighter adapter to the DC output port, then plug your device into the adapter.
4. The LCD display will show the remaining power and output voltage.

Image: Portable Charger Function. This image illustrates the YABER YA30 being used as a power bank, showing multiple devices like a smartphone and tablet connected to its USB output ports for charging.

6.4. 비상등 사용

The device includes a 5W LED light with multiple modes for emergency situations.

1. To turn on the light when the device is off, press and hold the 'On/Off Light' button for approximately 6 seconds.
2. If the device is already on, a short press (about 1 second) of the 'On/Off Light' button will activate the light.
3. Short press the 'On/Off Light' button repeatedly to cycle through the modes: Continuous Light > SOS Signal > Strobe Flash.
4. To turn off the light, press and hold the 'On/Off Light' button.
5. The LED light can be rotated nearly 360° and adjusted 90° for optimal illumination.

Image: Emergency Light Function. This image shows the YABER YA30's rotating LED emergency light in use, illuminating a tent, and highlights its adjustable angle and various light modes (illumination, SOS, strobe).

7. 유지관리

• 사용하지 않을 때는 장치를 서늘하고 건조한 곳에 보관하십시오.
• Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• 마른 부드러운 천으로 기기를 닦으십시오. 강한 화학 약품이나 연마제를 사용하지 마십시오.
• 포트에 먼지나 이물질이 들어가지 않도록 주의하세요.

8. 문제 해결

장치가 켜지지 않습니다:

Ensure the device is charged. If it has been stored for a long time, it might require a full charge cycle.

차량 시동이 걸리지 않습니다.

스마트클을 확인하세요amps are correctly connected to the battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge (above 50%). If the smart clip shows an error, refer to its indicator guide in the full manual.

압축기가 시작되지 않음:

Ensure the device is turned on and the desired pressure is set. Check that the air hose is securely connected. The compressor may enter protection mode if used continuously for too long; allow it to cool down.

Device goes into protection mode:

스마트 클amps have built-in protections. This could be due to short circuit, reverse polarity, over-current, or high temperature. Disconnect all connections, allow the device to cool, and re-attempt operation following instructions carefully.

9. 사양

10. 보증 및 지원

YABER products come with a manufacturer's warranty. For warranty claims, technical support, or any questions regarding your YABER YA30, please contact YABER customer service directly. Refer to the contact information provided in your product packaging or on the official YABER web대지.

Many users have reported positive experiences with YABER's customer service for product replacements or troubleshooting assistance.