베링거 GB3002-A 어쿠스틱 기타 스탠드 사용 설명서

1. 서론

Thank you for choosing the Behringer GB3002-A Acoustic Guitar Stand. This stand is designed to provide a secure and stable resting place for your acoustic guitar, featuring durable construction and protective foam padding. This manual provides essential information for the proper setup, operation, and maintenance of your guitar stand.

2. 안전 지침

• Ensure the stand is placed on a flat, stable, and level surface to prevent tipping.
• Do not exceed the intended weight capacity of the stand. This stand is designed for a single acoustic guitar.
• Keep the stand away from high-traffic areas where it could be accidentally bumped.
• Avoid placing the stand near heat sources, direct sunlight, or areas with extreme temperature fluctuations.
• Regularly inspect the stand for any signs of wear or damage to the frame or protective foam. Discontinue use if damage is observed.
• Keep out of reach of small children and pets to prevent accidents.

3. 패키지 내용

포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.

• 1 x Behringer GB3002-A Acoustic Guitar Stand

4. 설정

The Behringer GB3002-A guitar stand is designed for quick and easy setup. It arrives in a folded, compact state for transport and storage.

1. 스탠드 펼치기: Gently grasp the top and bottom sections of the folded stand. Pull the two main legs apart until the stand forms a stable 'A' shape. Ensure the locking mechanism at the top clicks into place, securing the stand in its open position.

Figure 4.1: The Behringer GB3002-A stand in its compact, folded state.

2. 안정성 확인: Once unfolded, gently press down on the top of the stand to confirm it is fully open and stable. The rubber feet at the base should make full contact with the floor.

Figure 4.2: The Behringer GB3002-A stand fully unfolded and ready for use.

5. 사용 설명서

To safely place your acoustic guitar on the stand:

1. Ensure the stand is fully open and stable on a level surface.
2. Carefully lift your acoustic guitar.
3. Position the guitar so that its lower bout rests securely on the two padded arms at the base of the stand. The neck of the guitar should lean against the padded upper support.
4. Verify that the guitar is balanced and stable on the stand before releasing your grip. The foam protection on the stand's contact points is designed to prevent scratches and dings to your instrument.

Figure 5.1: An acoustic guitar properly placed on the Behringer GB3002-A stand.

6. 유지관리

Proper maintenance ensures the longevity and continued protection for your instrument:

• 청소: Wipe the metal frame with a soft, dry cloth. For stubborn dirt, a slightly damp 천을 사용하여 세척 후 바로 말리세요. 연마성 세척제나 용제는 사용하지 마세요.
• 폼 보호: Periodically check the foam padding for any signs of wear, tears, or compression. While durable, damaged foam may reduce protection for your guitar.
• Joints and Hinges: Ensure all moving parts and joints operate smoothly. If any stiffness occurs, a small amount of silicone-based lubricant can be applied, avoiding contact with the foam or your instrument.
• 저장: When not in use for extended periods, fold the stand for compact storage in a dry, temperate environment.

7. 문제 해결

If you encounter any issues with your Behringer GB3002-A guitar stand, consider the following:

• 스탠드 불안정성: Ensure the stand is fully unfolded and the top locking mechanism is engaged. Verify it is placed on a completely flat and level surface. Check that all rubber feet are intact and making full contact with the floor.
• Guitar Not Sitting Securely: Confirm that the guitar's lower bout is fully seated in the padded arms and the neck is resting against the upper support. Adjust the guitar's position until it feels balanced and stable.
• Scratches/Dings: If you notice any new marks on your guitar, inspect the stand's foam padding for damage or displacement. Ensure the guitar is not making contact with any unpadded metal parts of the stand.

8. 사양

9. 보증 및 지원

For information regarding warranty coverage, technical support, or service inquiries, please refer to the official Behringer website or contact your local Behringer distributor. Please retain your proof of purchase for any warranty claims.