1. 서론
Thank you for choosing the IROAD NX7 Dash Cam. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera. The IROAD NX7 is a high-performance 2-channel dash cam featuring Full HD 1080P recording for both front and rear cameras, a 3-inch touch panel display, 24-hour parking surveillance with motion and impact detection, and advanced driving assistance systems (ADAS).
2. 패키지 내용
다음 품목이 모두 패키지에 포함되어 있는지 확인하세요.
- IROAD NX7 Front Dash Cam Unit
- 후방 카메라
- 후면 카메라 연결 케이블
- OBDⅡ Power Cable (for general and hybrid vehicles)
- 16GB 마이크로SD 카드
- 사용 설명서 (본 문서)
- 접착식 마운트
3. 제품 오버view
Familiarize yourself with the components and ports of your IROAD NX7 Dash Cam.
그림 3.1: The IROAD NX7 main dash cam unit and its accompanying rear camera, showcasin컴팩트한 디자인이 특징입니다.
그림 3.2: IROAD NX7 Front and Rear Dash Cam with labeled components. The image shows the front camera with its lens, security LED, and operation LED. The rear camera is also shown. Various ports are labeled: DC-IN power terminal, GPS terminal, rear camera terminal, memory card slot, power switch, and bracket.
그림 3.3: 하향식 view of the IROAD NX7 dash cam and its rear camera, highlighting their sleek design.
- 카메라 렌즈: 동영상 foo를 캡처합니다.tage.
- 보안 LED: Indicates security recording status.
- 작동 LED: Indicates device operation status.
- 까치발: Used for mounting the dash cam.
- DC-IN Power Terminal: 전원 케이블에 연결합니다.
- GPS Terminal: For connecting an external GPS module (if applicable).
- 메모리 카드 슬롯: Insert the MicroSD card here.
- 전원 스위치: 장치를 켜거나 끕니다.
- Front Terminal: Connection point for the front camera (if separate).
- Rear Camera Terminal: 후방 카메라를 연결합니다.
4. 설정 및 설치
4.1 MicroSD 카드 준비
- Before first use, it is recommended to format the included 16GB MicroSD card using the IROAD PC Viewer software or directly on the device via the touch screen menu.
- Insert the MicroSD card into the memory card slot until it clicks into place. Ensure the card is inserted correctly to avoid damage.
4.2 대시캠 장착
The IROAD NX7 uses an adhesive mounting method for secure attachment.
- 일반적으로 뒷부분 뒤쪽의 앞 유리에서 최적의 위치를 선택하십시오.view 거울을 사용하여 시야를 가리지 않도록 합니다. view.
- Clean the chosen area on the windshield thoroughly to ensure strong adhesion.
- Attach the adhesive mount to the dash cam bracket.
- Peel off the protective film from the adhesive pad and firmly press the dash cam with the mount onto the cleaned windshield area for at least 30 seconds.
- Repeat the process for the rear camera, mounting it on the rear windshield.
4.3 전원 연결
The IROAD NX7 comes with an OBDⅡ power cable for easy and reliable power supply.
- Locate your vehicle's OBDⅡ port (usually under the dashboard on the driver's side).
- Connect the OBDⅡ power cable to the OBDⅡ port.
- Connect the other end of the OBDⅡ power cable to the DC-IN Power Terminal on the IROAD NX7 front dash cam.
- Route the power cable neatly along the vehicle's interior trim to avoid interference with driving.
- Connect the rear camera to the front unit using the provided rear camera connection cable.
5. 사용 설명서
5.1 전원 켜기/끄기
- The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on, provided it is connected via the OBDⅡ power cable.
- To manually power off, press and hold the Power Switch until the device shuts down.
5.2 기본 녹화 모드
The IROAD NX7 supports continuous recording, event recording, and parking surveillance recording.
- 연속 녹화 : Automatically starts when the vehicle is powered on. Footage is recorded in 1-minute segments and saved to the MicroSD card.
- Event Recording (Impact Recording): In case of a sudden impact or collision, the G-sensor triggers an event recording, saving the footage separately to prevent overwriting.
- Loop Recording (Overwrite Recording): When the MicroSD card is full, the oldest continuous recording files are automatically overwritten to make space for new recordings. Event recordings are protected from overwriting.
5.3 주차 감시 모드
The IROAD NX7 offers 24-hour parking surveillance with advanced features:
- 동작 감지: The dash cam detects motion around the vehicle and automatically records footage.
- 충격 감지: If an impact is detected while parked, the device records and saves the event footage.
- Time-lapse & Hyperlapse: For extended parking surveillance, the dash cam can record in time-lapse mode, compressing long periods into shorter videos, saving storage space.
- Battery Over-discharge Prevention: The dash cam monitors your vehicle's battery voltage and automatically cuts off power if the voltage drops below a set threshold, preventing battery drain.
5.4 Touch Panel Operation
The 3-inch touch panel allows for easy navigation and settings adjustment.
- Tap icons to access menus such as Live View, Playback, Settings, and File 관리.
- Swipe to navigate through recorded files.
- Adjust settings like recording resolution, G-sensor sensitivity, parking mode options, and time/date.
5.5 첨단 운전 보조 시스템(ADAS)
The IROAD NX7 includes ADAS features to enhance driving safety:
- LDWS(차선 이탈 경고 시스템): 차량이 차선을 이탈하면 경고음을 울립니다.
- FCWS(전방 충돌 경고 시스템): 앞 차량과의 충돌이 임박했음을 경고합니다.
- FVDW(전방 차량 출발 경고): Notifies you when the vehicle in front starts moving from a standstill.
Note: ADAS features are supplementary and should not replace safe driving practices.
5.6 LED 신호등 호환성
The IROAD NX7 is designed to record clearly even when facing LED traffic signals, minimizing flicker and ensuring reliable footage.
6. 유지관리
6.1 MicroSD 카드 관리
- Regularly format the MicroSD card (at least once a month) to maintain optimal recording performance and prevent data corruption. This can be done via the dash cam's settings or the IROAD PC View어.
- Use only high-quality, genuine MicroSD cards recommended by IROAD.
- Replace the MicroSD card every 6-12 months, depending on usage, as flash memory has a limited lifespan.
6.2 장치 청소
- Wipe the camera lenses and the device body with a soft, dry, lint-free cloth.
- Do not use chemical cleaners or abrasive materials, as they may damage the device.
- 청소하기 전에 장치의 전원이 꺼져 있는지 확인하세요.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | No power supply; loose cable connection; faulty power cable. | Check OBDⅡ cable connection; ensure vehicle ignition is on; test with another power source if possible. |
| 녹음이 중지되거나 정지됩니다. | MicroSD 카드 오류; MicroSD 카드 용량 초과; MicroSD 카드 호환 불가. | Format the MicroSD card; replace with a new, compatible card. |
| 비디오 품질이 좋지 않습니다. | 렌즈가 더럽습니다. 렌즈에 보호 필름이 여전히 붙어 있습니다. 해상도 설정이 잘못되었습니다. | Clean the lens; remove any protective film; check video resolution settings. |
| 주차 모드가 작동하지 않습니다. | Parking mode disabled; low vehicle battery voltage; incorrect sensitivity settings. | Enable parking mode in settings; check vehicle battery; adjust motion/impact sensitivity. |
8. 사양
| 특징 | 설명 |
|---|---|
| 모델명 | 아이로드 NX7 |
| 디스플레이 유형 | LCD 터치 패널 |
| 화면 크기 | 3인치 |
| 비디오 캡처 해상도 | 1080p 풀 HD (전면 및 후면) |
| View잉 각도 | 140° 광각 |
| 플래시 메모리 유형 | MicroSD 카드(16GB 포함) |
| 장착 유형 | 점착제 |
| 제어 방법 | 만지다 |
| 특별 기능 | Motion Sensor, 24-Hour Parking Surveillance, Impact Recording, Loop Recording, LED Signal Compatible, ADAS (LDWS, FCWS, FVDW), Time-lapse, Hyperlapse, Battery Over-discharge Prevention, Format Free 2.0, Windows Viewer |
| 호환 차량 유형 | General vehicles, Parking |
| 포함된 구성 요소 | User Manual, Charging Cable (OBDⅡ Power Cable), MicroSD Card |
9. 보증 및 지원
For warranty information and technical support, please refer to the warranty card included with your product or visit the official IROAD web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
For further assistance, you may contact IROAD customer service through their official channels.
