소개
Thank you for choosing the BLS T36-3 36 LED Closet Light. This super bright, battery-powered under cabinet lighting solution is designed to enhance visibility and convenience in various indoor spaces. Featuring a motion sensor and a 1500mAh rechargeable battery, these wireless lights offer efficient and flexible illumination.
- 36개의 매우 밝은 LED: Provides 180 Lumens of 5500K Daylight White light, ideal for closets, cabinets, kitchens, and more.
- Ultra-Long Battery Run Time: Equipped with a 1500mAh rechargeable battery, offering up to 120 days of use (based on 10 uses/day, 20 seconds/use).
- Reliable Motion Sensor with 2 Modes: Features ON/OFF/AUTO NIGHT/AUTO DAY & NIGHT modes. BLS Constant-Sense technology ensures the light stays on as long as motion is detected, turning off 15 seconds after inactivity.
- 무선 설치: Built-in strong magnets allow for easy attachment to metal surfaces or use with provided 3M adhesive magnetic plates for non-metal surfaces.
- 다양한 용도: Suitable for various indoor locations including wardrobes, attics, basements, drawers, garages, and vanity mirrors.
설치 지침
- 조명 충전: Before first use, fully charge each LED light using the provided USB charging cable. The charging port is located on the side of the light. A red indicator light typically signifies charging, turning green or off when fully charged.
- 장착 표면 준비: 원하는 설치 표면이 깨끗하고, 건조하고, 매끄러운지 확인하세요.
- Attach Magnetic Plates (for non-metal surfaces):
- Peel off the protective film from one side of the 3M adhesive on the magnetic plate.
- Firmly press the adhesive side of the magnetic plate onto the desired installation location.
- Repeat for all lights.
- 빛을 탑재하다:
- If installing on a metal surface, simply attach the light directly as it has a built-in strong magnet.
- If using magnetic plates, align the magnets on the back of the LED light with the installed magnetic plates and gently attach. The lights are easily detachable for recharging.
작동 지침
The BLS T36-3 LED Closet Light features a slide switch with multiple operating modes:
- OFF : Power off the light.
- AUTO NIGHT (Moon Icon): Motion sensor mode. The light will only turn on when it detects motion in dark or very dim conditions. Ideal for bedrooms, hallways, or basements at night.
- AUTO DAY & NIGHT (Sun Icon): Motion sensor mode. The light will turn on when it detects motion, regardless of ambient light conditions (day or night). Suitable for closets, cabinets, or under-cabinet lighting where light is needed at all times.
- 에: The light remains continuously on, regardless of motion or ambient light.
The BLS Constant-Sense technology ensures the light stays illuminated as long as motion is detected nearby, automatically turning off approximately 15 seconds after motion ceases.
유지
- 충전 중: When the light dims or stops responding, it indicates a low battery. Detach the light from its mounting, connect the provided USB cable to the charging port, and plug it into a USB power source. A red indicator light typically signifies charging, turning green or off when fully charged.
- 청소: Wipe the light's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish or electronic components.
- 저장: If storing the lights for an extended period, ensure they are fully charged and stored in a cool, dry place. Recharge periodically to maintain battery health.
충전 시연 영상
Video: A demonstration on how to charge the BLS LED Closet Light using the provided USB cable. This video shows the charging port and indicator light behavior.
Battery Life Information Video
Video: This video highlights the 1500mAh rechargeable battery and its extended run time of up to 120 days, demonstrating the product's efficiency.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 배터리가 부족합니다. Incorrect mode setting. Insufficient darkness (in AUTO NIGHT mode). | 조명을 완전히 충전하세요. Check the slide switch and ensure it's set to ON, AUTO NIGHT, or AUTO DAY & NIGHT. Test in a darker environment or switch to AUTO DAY & NIGHT mode. |
| 모션 센서가 작동하지 않습니다. | Incorrect mode setting. 센서가 막혔습니다. Ambient light too bright (in AUTO NIGHT mode). | Ensure the switch is set to AUTO NIGHT or AUTO DAY & NIGHT. 센서 주변의 장애물을 제거하십시오. Test in a darker area or switch to AUTO DAY & NIGHT. |
| 빛이 장착 표면에서 약해집니다. | 접착제가 충분히 강하지 않거나 표면이 깨끗하지 않습니다. Magnetic plates not properly secured. | Clean the surface thoroughly before applying adhesive. Use new 3M adhesive strips if necessary. Consider using screws for more permanent installation if the surface allows. |
| 배터리 수명이 짧습니다. | 잦은 활성화. Continuous ON mode usage. 시간이 지남에 따라 배터리가 저하됩니다. | Optimize mode setting (e.g., use AUTO NIGHT in dark areas). Avoid prolonged use in ON mode. Ensure full charge cycles. If battery life remains significantly short, contact support. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 블루스 |
| 모델명 | 36 LED Closet Lights (T36-3) |
| 색온도 | 5500K 데이라이트 화이트 |
| LED의 수 | 36 |
| 명도 | 180루멘 |
| 전원 | 1500mAh Rechargeable Lithium Ion Battery (included) |
| 왓tage | 3 와트 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌, 알루미늄 |
| 제품 치수 | 8.9인치 길이 x 1.4인치 너비 x 0.6인치 높이 |
| 품목 무게 | 0.42킬로그램(14.8온스) |
| 설치 유형 | Wall Mount / Under Cabinet (Magnetic with 3M adhesive) |
| 특징 | 3-way switching, Motion Sensor, Instant On |
| 제어 방법 | 슬라이드 스위치 |
| 실내/실외 사용 | 실내 |
| 방수 레벨 | Waterproof (Note: Typically means splash-proof, not submersible) |
보증 정보
BLS offers an 18-month warranty for this product. To register for your free extended warranty, please scan the QR code provided on the product packaging or contact customer support.
고객 지원
For any support needs, questions, or concerns regarding your BLS T36-3 LED Closet Light, please contact us via email:
