겐미츠 PROVerXL 4030 V1 ~ 6060 XY축 확장 키트 사용 설명서

1. 서론

Welcome to the Genmitsu PROVerXL 4030 V1 to 6060 XY-Axis Extension Kit. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new extension kit. This kit is designed to expand the working area of your existing Genmitsu PROVerXL 4030 V1 CNC machine from its original 4030 dimensions to a larger 6060 (24x24 inch) size, enhancing your machine's capabilities for larger projects.

Note: This kit is specifically designed for the PROVerXL 4030 V1 and is not compatible with the PROVerXL 4030 V2.

2. 안전 정보

Adhering to safety guidelines is crucial for preventing injury and damage to equipment. Please read and understand all safety instructions before proceeding with assembly or operation.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves, when operating or maintaining the CNC machine.
• Ensure the machine is powered off and unplugged before performing any assembly, maintenance, or adjustments.
• 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
• Operate the machine in a well-ventilated area to prevent dust accumulation.
• Familiarize yourself with the emergency stop procedure and location.
• 작동 중에 기계를 무인 상태로 두지 마십시오.

3. 설치 및 조립

This extension kit is designed for straightforward assembly. The process involves replacing existing XY-Axis components with the new, longer ones provided in the kit.

3.1. 준비

• 모든 구성품을 풀어서 포장 목록과 비교해보세요.
• Ensure your existing Genmitsu PROVerXL 4030 V1 machine is powered off and disconnected from the power source.
• Clear a spacious and stable workspace.

3.2. Disassembly of Existing XY-Axis

Carefully remove the existing XY-Axis components from your PROVerXL 4030 V1 machine. Refer to your original PROVerXL 4030 V1 manual for specific disassembly instructions if needed.

3.3. Installation of Extension Kit Components

The kit includes pre-installed axis carriages for ease of installation. Follow these general steps:

1. Attach the new, longer XY-Axis rails and lead screws to the main frame of your CNC machine.
2. Secure all connections using the provided hardware.
3. Ensure all moving parts glide smoothly without obstruction.

3.4. 검증

• Once assembled, manually move the gantry and spindle along all axes to check for smooth movement and proper alignment.
• Double-check all screws and fasteners to ensure they are securely tightened.

For detailed step-by-step visual guidance, please refer to the installation guide available on the Genmitsu resource center.

그림 1: 이상view of the Genmitsu PROVerXL 4030 V1 CNC router after installation of the 6060 XY-Axis Extension Kit, highlighting the larger frame and increased working area.

Figure 2: A visual representation of the expanded 600mm x 600mm (24x24 inch) working area provided by the extension kit, with dimensions indicated.

Figure 3: The individual components included in the extension kit, such as the longer aluminum profiles, lead screws, and cable management chains, ready for assembly.

Figure 4: A comparative view illustrating the significant increase in working area from the original 4030 dimensions to the expanded 6060 dimensions after the kit installation.

그림 5: 자세한 view of the extended XY-axis components, focusing on the lead screw mechanism and linear rails that facilitate precise movement across the larger work area.

4. Operating with the Extension Kit

The extended 6060 (24x24 inch) working area allows for larger projects and increased material capacity. Follow these guidelines for optimal operation:

4.1. 소프트웨어 구성

• After physical installation, it may be necessary to update your CNC control software (e.g., GRBL settings) to reflect the new machine dimensions. Consult your software's documentation or Genmitsu support for specific parameter adjustments related to the increased travel distance.

4.2. 재료 Clamp잉

• 항상 안전하게 clamp your workpiece to the spoilboard to prevent movement during carving. Use appropriate clamps for the size and type of material.

4.3. Toolpath Generation

• When creating toolpaths in your CAM software, ensure the design fits within the new 600x600mm working area.

4.4. 첫 번째 실행

• Perform a dry run (air cut) without a workpiece to verify the machine's movement and ensure the toolpath is correctly executed within the new dimensions.
• Start with conservative cutting parameters (feed rate, plunge rate, depth of cut) and adjust as needed for your specific material and bit.

5. 유지관리

정기적인 유지보수는 확장형 CNC 기계의 수명과 최적의 성능을 보장합니다.

• 청소: Regularly clean dust and debris from the lead screws, linear rails, and other moving parts using a brush or compressed air.
• 매끄럽게 하기: Apply a thin layer of appropriate lubricant to the lead screws and linear rails periodically to ensure smooth operation and prevent wear.
• 점검: Periodically inspect all fasteners, belts (if applicable), and electrical connections for tightness and wear. Replace any worn or damaged components immediately.
• 스핀들 관리: Keep the spindle clean and free of debris. Follow the manufacturer's recommendations for spindle maintenance.

6. 문제 해결

If you encounter issues with your extension kit or CNC machine, refer to the following common troubleshooting steps:

6.1. Machine Not Moving/Incorrect Movement

• Check all electrical connections, especially to stepper motors and limit switches.
• Verify software settings (e.g., GRBL parameters) match the extended dimensions.
• Ensure no physical obstructions are blocking the gantry or spindle movement.

6.2. Poor Carving Quality/Inaccuracy

• Check for loose components or excessive play in the axes. Tighten all fasteners.
• 공작물이 단단히 고정되었는지 확인하십시오.amp편집.
• Verify cutting parameters (feed rate, depth of cut) are appropriate for the material and bit.
• Inspect the cutting bit for dullness or damage.

6.3. Limit Switch Errors

• Ensure limit switches are correctly installed and wired.
• Check for physical obstructions preventing the switches from being triggered or reset.

7. 사양

8. 보증 및 지원

For warranty information and technical support, please refer to the official Genmitsu web사이트를 방문하거나 판매점에 문의하세요.

Online resources, including FAQs and additional guides, are available at the Genmitsu Store: Genmitsu Store