mophie Powerstation Go Rugged AC - Instruction Manual

위에view

The mophie Powerstation Go Rugged AC is a versatile portable power solution designed to keep your devices charged and your vehicle running. Equipped with a 55.5 mWh internal battery, it features two USB-A ports and a 65W AC port for charging various electronics, from smartphones and tablets to laptops and small appliances. Beyond personal devices, it functions as a portable car jump starter for full-sized vehicles like cars, trucks, and boats, including shock-proof jumper cables for safe operation. An integrated LED floodlight and intuitive LCD display enhance its utility in emergency situations. Its rugged design and compact size make it an ideal companion for travel, outdoor adventures, or everyday emergencies.

상자 안에 무엇이 들어있나요?

• powerstation - mophie jump starter
• AC 벽 플러그
• 점퍼 케이블
• Charging Cable (USB-C Cable)
• 운반 파우치
• 빠른 시작 가이드

제품 특징

55.5 mWh Internal Battery

Equipped with a robust 55.5 mWh internal battery, providing amp다양한 용도에 필요한 전력을 공급합니다.

65W AC Power Port

Features a 65W AC port to power laptops, tablets, and other small electrical appliances.

듀얼 USB-A 포트

Two USB-A ports allow simultaneous charging of smartphones, tablets, and other USB-enabled devices.

휴대용 자동차 점프 스타터

Capable of jump-starting full-sized vehicles like cars, trucks, and boats with included mini jumper cables.

직관적인 LCD 디스플레이

Easy-to-read display shows battery level, voltage, and safety checks.

밝은 LED 투광 조명

Built-in LED floodlight for illumination in low-light conditions or emergencies.

설치 지침

초기 충전

1. Connect the included AC wall plug to the powerstation's charging port.
2. Plug the AC wall plug into a standard wall outlet.
3. Allow the powerstation to charge completely until the LCD display shows 100%.

Connecting Jumper Cables

1. Locate the jump start port on the powerstation.
2. Plug the mini jumper cables into the jump start port. Ensure a secure connection. The cables are designed to fit only one way to prevent incorrect polarity.

작동 지침

Charging Devices via USB-A Ports

1. Connect your device's USB charging cable to one of the two USB-A output ports on the powerstation.
2. The powerstation will automatically begin charging your device. Monitor the device's charging status.

Powering Devices via 65W AC Port

1. Open the protective cover for the 65W AC output port.
2. Plug your device's AC power adapter into the AC port.
3. Press the AC power button to activate the AC output. The LCD display will indicate AC power is active.
4. Ensure your device is compatible with 65W AC power.

점프 스타트 차량

1. Ensure the powerstation is fully charged.
2. Connect the mini jumper cables to the powerstation's jump start port.
3. 빨간색(양수) cl을 연결합니다.amp 차량의 배터리 양극 단자에 연결합니다.
4. 검은색(음극) cl을 연결하세요amp to the vehicle's negative battery terminal or a grounded part of the vehicle chassis.
5. Press the jump start button on the powerstation. Wait for the indicator light to turn solid green.
6. Start your vehicle. Once started, immediately disconnect the jumper cables from the vehicle battery, then from the powerstation.

LED 투광등 사용

1. Press the floodlight button to turn on the LED light.
2. Press the button again to cycle through different light modes (e.g., bright white, red, flashing red).
3. Press and hold the button to turn off the floodlight.

Using the Air Compressor (for models with this feature)

The mophie Powerstation Go Rugged AC may include an integrated air compressor for inflating tires or other inflatables. Refer to the quick-start guide for specific instructions on connecting the air hose and setting desired pressure.

유지

• Keep the powerstation clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Store the powerstation in a cool, dry place away from direct sunlight and extreme temperatures.
• For optimal battery life, fully charge the powerstation every 3 months, even if not in use.
• 기기를 직접 분해하거나 수리하려고 하지 마세요. 도움이 필요하면 고객 지원에 문의하세요.

문제 해결

기기가 충전되지 않음

• Ensure the charging cable is securely connected to both the powerstation and the power source.
• 벽면 콘센트가 정상적으로 작동하는지 확인하십시오.
• Check if the powerstation itself has sufficient charge.

Vehicle Not Jump Starting

• Confirm the jumper cables are correctly connected to the vehicle battery terminals (red to positive, black to negative).
• Ensure the powerstation has adequate charge for jump starting.
• Check for any error messages on the LCD display and consult the quick-start guide for their meaning.

명세서

보증 및 지원

mophie products are designed for reliability and performance. For detailed warranty information, product registration, or technical support, please visit the official mophie website or refer to the warranty card included in your product packaging. You can also contact mophie customer service directly for assistance with any issues or questions.