Total TTAC2506 12V Car Air Compressor User Manual

1. 중요 안전 지침

Read all instructions carefully before operating the compressor. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• 압축기는 항상 환기가 잘 되는 곳에서 작동하십시오.
• 압축기를 비나 습한 환경에 노출시키지 마십시오.
• 압축기를 작동하는 동안 어린이와 주변 사람이 접근하지 못하도록 하세요.
• Ensure the power source (12V car battery) is appropriate for the compressor.
• Do not overinflate tires. Always refer to the vehicle or tire manufacturer's recommended pressure.
• Disconnect the power cable from the car battery when not in use or before performing any maintenance.
• 작동 중 또는 작동 직후에는 뜨거운 표면을 만지지 마십시오.

2. 제품 오버view

The Total TTAC2506 is a portable 12V car air compressor designed for inflating vehicle tires and other inflatable items. It features a dual-cylinder design for efficient inflation.

그림 2.1: Total TTAC2506 Car Air Compressor with included accessories. This image shows the main unit, the coiled air hose with pressure gauge, and various nozzle adapters for different inflation needs.

그림 2.2: Total TTAC2506 Car Air Compressor, showing the unit alongside its branded carrying bag and retail packaging. The bag provides convenient storage and portability.

그림 2.3: Total TTAC2506 Car Air Compressor with the air hose fully connected and ready for use. This view highlights the connection point for the hose and the integrated pressure gauge.

패키지 내용:

• Total TTAC2506 Car Air Compressor
• Coiled Air Hose with Pressure Gauge
• Various Nozzle Adapters
• Carrying Bag (may vary by package)

3. 설정

1. 준비: Ensure your vehicle's engine is running to provide stable 12V power to the compressor. Park the vehicle on a level surface and engage the parking brake.
2. 전원에 연결: Connect the compressor's power cable directly to your vehicle's 12V car battery terminals. Connect the red clamp 양극(+) 단자와 검은색 cl에amp 음극(-) 단자에 연결하십시오. 안전한 연결을 확인하십시오.
3. 공기 호스 부착: Screw the coiled air hose securely onto the air outlet port of the compressor.
4. 어댑터 선택: Choose the appropriate nozzle adapter for the item you wish to inflate (e.g., tire valve, sports ball needle).

4. 사용 설명서

1. 항목에 연결: Attach the chosen nozzle adapter to the item you intend to inflate. For tires, firmly screw the tire valve connector onto the tire valve stem.
2. 압력 확인: The integrated pressure gauge will display the current pressure of the item. Note this reading.
3. 인플레이션 시작: Turn on the compressor using the power switch located on the unit. The compressor will begin to inflate the item.
4. 모니터 압력: Continuously monitor the pressure gauge during inflation. Inflate to the recommended pressure for your tire or item. Do not exceed the maximum recommended pressure.
5. 인플레이션 중지: 원하는 압력에 도달하면 압축기를 끄십시오.
6. 연결 해제: Carefully disconnect the nozzle adapter from the item and then disconnect the power clamp자동차 배터리에서 나온 것입니다.
7. 쿨다운: Allow the compressor to cool down after use, especially after prolonged operation.

메모: For optimal performance and to prevent overheating, avoid continuous operation for more than 10-15 minutes. Allow the unit to cool for at least 10 minutes between uses if prolonged inflation is required.

5. 유지관리

정기적인 유지관리는 압축기의 수명과 최적의 성능을 보장합니다.

• 청소: Wipe down the compressor with a dry or slightly damp 사용 후 천으로 닦아주세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
• 저장: Store the compressor in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cable and Hose Inspection: Periodically inspect the power cable, air hose, and connectors for any signs of wear, damage, or kinks. Replace if necessary.
• 노즐 어댑터: 노즐 어댑터를 깨끗하고 잔해물이 없도록 유지하십시오.

6. 문제 해결

7. 사양

8. 보증 및 지원

Total products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Total Tools web대지.

구매 영수증을 보관하여 보증 청구에 대비하세요.