1. 서론
The TASCAM TM-82 is a dynamic microphone engineered for capturing vocals and instruments. Its robust construction and cardioid directivity make it suitable for various live and studio applications, providing clear sound reproduction while minimizing unwanted ambient noise.
The TASCAM TM-82 dynamic microphone is designed for capturing vocals and instruments.
2. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- TASCAM TM-82 Dynamic Microphone
- 마이크 홀더
The TM-82 microphone comes with a compatible mic holder for standard microphone stands.
3. 설정
- Attach the Mic Holder: Securely screw the included mic holder onto a standard microphone stand.
- 마이크 장착: Insert the TASCAM TM-82 microphone into the mic holder. Ensure it is firmly seated.
- 케이블 연결: Connect an XLR cable (not included) to the XLR output connector at the base of the microphone. Connect the other end of the XLR cable to your mixer, audio interface, or amp리퍼.
- 힘: The TM-82 is a dynamic microphone and does not require phantom power for operation.
4. 사용 설명서
4.1. 마이크 배치
Optimal microphone placement is crucial for sound quality. Experiment with distance and angle to achieve the desired sound. The TM-82 features a cardioid directivity, meaning it is most sensitive to sound coming from the front and rejects sound from the sides and rear. This helps reduce feedback and isolate the intended sound source.
4.2. For Vocals
Position the microphone 2-6 inches (5-15 cm) from the vocalist's mouth. Adjust the distance to control proximity effect (increased bass response when close to the mic) and prevent plosives (harsh 'p' and 'b' sounds). The cardioid pattern helps minimize stage bleed from other instruments.
The TM-82 is suitable for vocal performances, capturing nuances while minimizing room noise.
4.3. For Instruments
When miking instruments, place the microphone in front of the sound source. For acoustic guitars, aim towards the soundhole or where the neck meets the body for a balanced sound. For guitar amplifiers, position the microphone close to the speaker cone. The robust metal construction ensures reliable performance.
The microphone can be used for miking instruments, providing clear sound reproduction.
5. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | 티엠-82 |
| 제조업체 | 타스캠 |
| 마이크 폼 팩터 | 핸드헬드 |
| 극성 패턴 | 단방향 (카디오이드) |
| 연결 기술 | XLR |
| 커넥터 유형 | XLR |
| 임피던스 | 300옴 |
| 주파수 응답 | Approx. 20 Hz - 20 kHz (refer to diagram) |
| 신호 대 잡음 비율 | 78데시벨 |
| 재료 | 금속 |
| 품목 무게 | 1.76온스(50그램) |
| 제품 크기(L x W x H) | 2.01 x 2.01 x 6.69 인치 |
This diagram illustrates the frequency response and unidirectional (cardioid) polar pattern of the TM-82 microphone, showing its sensitivity across different frequencies and directions.
6. 유지관리
- 청소: 마이크 본체를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제는 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
- 저장: 마이크를 사용하지 않을 때는 건조하고 먼지가 없는 곳에 보관하십시오. 극한의 온도와 습도를 피하십시오.
- 손질: The TM-82 is built tough with metal materials, but avoid dropping or subjecting it to severe impacts, which can affect performance.
7. 문제 해결
- 사운드 출력 없음:
- Ensure the XLR cable is securely connected to both the microphone and the input device (mixer, interface).
- Check the input device's volume and gain settings.
- Verify that the input channel on your device is selected and active.
- 낮은 볼륨:
- 믹서 또는 오디오 인터페이스의 게인을 높이세요.
- Ensure the microphone is positioned optimally relative to the sound source.
- Unwanted Noise/Feedback:
- Reposition the microphone to utilize its cardioid pattern, aiming it away from speakers or noise sources.
- 케이블이나 연결 부분에 결함이 있는지 확인하십시오.
- Reduce gain levels if feedback persists.
8. 보증 및 지원
보증 정보 및 기술 지원에 대해서는 Tascam 공식 웹사이트를 참조하십시오. website or contact your local Tascam dealer. Warranty terms and conditions may vary by region.
방문하세요 타스캠 스토어 더 많은 제품과 정보를 확인하세요.
