3M 14316

3M 해양용 접착 실란트 4000 UV 사용 설명서

모델: 14316

브랜드 : 3M

1. 제품 오버view

The 3M Marine Adhesive Sealant 4000 UV is a versatile, medium-strength adhesive sealant designed for marine environments. It offers excellent holding power, remains flexible, and is resistant to UV degradation, making it suitable for above-waterline applications.

주요 특징

Image of 3M Marine Adhesive Sealant 4000 UV cartridge

Figure 1: 3M Marine Adhesive Sealant 4000 UV cartridge. This image displays the product packaging, highlighting its brand, model, and key features.

2. 준비 및 적용

2.1 표면 준비

For optimal adhesion, surfaces must be clean, dry, and free of oil, grease, wax, and loose particles. Lightly abrade smooth surfaces with fine sandpaper (e.g., 180-220 grit) to improve mechanical adhesion. Clean abraded surfaces with an appropriate solvent, such as isopropyl alcohol or 3M General Purpose Adhesive Cleaner, and allow to dry completely.

2.2 신청 지침

  1. Ensure the sealant cartridge is at room temperature (65-75°F / 18-24°C) for best flow.
  2. 노즐을 원하는 비드 크기로 자릅니다.
  3. Insert the cartridge into a standard caulking gun.
  4. Apply a continuous, even bead of sealant to one of the prepared surfaces.
  5. Assemble parts within 10 minutes of application. Apply sufficient pressure to ensure good contact and spread of the sealant.
  6. Tool the sealant bead immediately after application to achieve a smooth finish and ensure proper contact with the substrate.

경화 시간: The sealant typically skins over in 30-60 minutes and cures to a tack-free state in approximately 24 hours. Full cure strength is achieved in 3-5 days, depending on temperature and humidity.

3. 이용 가이드라인

3.1 Bonding and Sealing

3M Marine Adhesive Sealant 4000 UV is suitable for bonding and sealing applications where a medium-strength, flexible, and UV-resistant bond is required. It is particularly effective for sealing deck hardware, through-hull fittings, and other components exposed to marine conditions and sunlight.

3.2 UV Resistance

This sealant is formulated with enhanced UV resistance to prevent degradation and yellowing when exposed to sunlight, ensuring long-term performance and aesthetic integrity in outdoor marine applications.

4. 유지 관리 및 보관

4.1 청소

Uncured sealant can be cleaned with a solvent such as mineral spirits or acetone. Cured sealant must be removed mechanically, typically by scraping or sanding. Always test solvents on an inconspicuous area first to ensure they do not damage the substrate.

4.2 보관 권장 사항

Store unused sealant in its original, tightly sealed container in a cool, dry place away from direct sunlight and extreme temperatures. Proper storage helps maintain product quality and extends shelf life.

5. 문제 해결

5.1 Sealant Does Not Cure

If the sealant fails to cure after following all instructions, remove the uncured material and reapply with a fresh cartridge, ensuring proper surface preparation and environmental conditions.

6. 기술 사양

사양
재료고무
상표3M
스타일콤팩트
품목 무게16 온스
치수(길이 x 너비 x 높이)10 x 3 x 2 인치
방수 레벨방수복
품목 형태반죽
한국어:076308143169
단위 수1.0 카운트
항목 수1
색상검은색
표면 추천Marine surfaces
제조업체3M
부품 번호14316
배터리 포함아니요
필요한 배터리아니요

7. 보증 및 지원

For information regarding product warranty, technical support, or further assistance, please refer to the official 3M web해당 웹사이트를 방문하거나 3M 고객 서비스 센터에 직접 문의하십시오. 구매 영수증을 보관하여 구매 증빙 자료로 활용하십시오.

You can visit the official 3M store for more product information: 3M Official Store