XFIT BMW Uni EVO 2웨이/3웨이 부분 액티브 전면 스피커 시스템 사용 설명서

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your Audio System XFIT BMW Uni EVO 2-Way 3-Way Partially Active Front Speaker System. Designed for compatibility with various BMW E/F/G Series and Mini models, this speaker set enhances your vehicle's audio experience with its 3-way partially active design.

Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

패키지 내용

패키지에 모든 구성품이 들어 있는지 확인하세요.

• 2 x HS 25 EVO 2 Tweeters
• 2 x FWK TW EVO + FWK MID Crossovers
• 2 x EX 80 SQ EVO 2 Mid-range Speakers
• 2 x LSR 80 BMW I + 2 x LSR 80 BMW II Speaker Adapters
• 2 x AX 08 BMW PLUS EVO Woofers
• 1 x HLAC BMW Connector (pair)
• 2 x Original BMW Connectors
• 마운팅 액세서리
• 설치 지침

그림 1: 위에view of the Audio System XFIT BMW Uni EVO 2 speaker system components. This image displays the main components of the speaker kit, including the large woofers, smaller mid-range speakers, dome tweeters, passive crossovers, and various wiring harnesses and adapters required for installation.

설정 및 설치

Professional installation is recommended for this speaker system. Incorrect installation can damage the product or your vehicle's electrical system. Always disconnect the vehicle's battery before beginning any electrical work.

일반 설치 단계:

1. 준비: Ensure the vehicle's ignition is off and the battery is disconnected. Gather all necessary tools.
2. Access Existing Speakers: Carefully remove door panels, seat bases, or other trim pieces to access the factory speaker locations. Refer to your vehicle's service manual for specific trim removal procedures.
3. Woofer Installation: The AX 08 BMW PLUS EVO woofers are designed to fit under-seat locations in compatible BMW models. Use the provided LSR 80 BMW I and LSR 80 BMW II adapters as needed to ensure a secure fit. Connect the woofers using the original BMW connectors or the HLAC BMW connector pair.
4. Mid-range Speaker Installation: Install the EX 80 SQ EVO 2 mid-range speakers into the designated door or dashboard locations.
5. 트위터 설치: Mount the HS 25 EVO 2 tweeters in the factory tweeter locations, typically in the door sails or A-pillars.
6. 크로스오버 연결: Connect the FWK TW EVO + FWK MID crossovers between the amplifier output and the respective speakers (tweeters and mid-range). Ensure correct polarity. These crossovers manage the frequency distribution to each speaker for optimal sound.
7. 배선: Route all speaker wires securely, avoiding sharp edges and moving parts. Ensure all connections are tight and insulated.
8. 테스트: Before reassembling the interior, reconnect the vehicle battery and test the speaker system with various audio sources to confirm proper functionality and sound quality.
9. 재조립: Once confirmed, carefully reassemble all removed trim pieces.

작동 지침

The Audio System XFIT BMW Uni EVO 2 speaker system is a passive component designed to work with your vehicle's existing or aftermarket amplifier. Once correctly installed, its operation is integrated with your car's audio head unit and amp리퍼.

• 오디오 소스: 차량의 헤드 유닛(라디오, CD, 블루투스 등)을 통해 오디오를 재생하세요.
• 볼륨 조절: Adjust the volume using your car's standard controls.
• 오디오 설정: 헤드 유닛의 이퀄라이저, 밸런스 및 페이더 컨트롤을 사용하여 원하는 대로 사운드를 미세 조정하십시오.
• Amp설정: If using an aftermarket amplifier, refer to its manual for optimal gain, crossover, and other settings.

유지

The Audio System XFIT BMW Uni EVO 2 speaker system requires minimal maintenance. Follow these guidelines to ensure long-term performance:

• 청소: Keep speaker grilles free from dust and debris. Use a soft, dry cloth to gently wipe surfaces. Avoid using harsh chemicals or abrasive cleaners.
• 환경 조건: Ensure the speakers are not exposed to excessive moisture or extreme temperatures, which can affect performance and lifespan.
• 전문 검사: If you notice any degradation in sound quality or suspect damage, consult a professional car audio technician for inspection.

문제 해결

스피커 시스템에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 스피커에서 소리가 나지 않습니다:
  • Check all wiring connections for looseness or disconnections.
  • 확인해주세요 amplifier의 전원이 켜져 있고 올바르게 작동하고 있습니다.
  • Ensure the head unit is outputting audio and volume is not muted or set too low.
  • Inspect fuses in the amplifier or vehicle's fuse box.
• 왜곡된 소리:
  • Reduce the volume level; distortion often occurs at excessively high volumes.
  • 확인하다 amplifier gain settings; if set too high, it can cause distortion.
  • 스피커 콘에 물리적 손상이 있는지 검사하십시오.
  • 스피커 선이 합선되거나 다른 금속 표면에 닿지 않도록 하십시오.
• 스피커 하나가 작동하지 않습니다.
  • Check the specific speaker's wiring connections and crossover.
  • Swap the non-working speaker with a known good one (if possible) to determine if the issue is with the speaker or the wiring/amp리파이어 채널.
  • 헤드 유닛의 밸런스 및 페이더 설정을 조정하십시오.
• 간헐적인 소리:
  • Loose wiring connections are a common cause. Re-secure all terminals.
  • Check for damaged speaker wires that might be intermittently losing contact.

If these steps do not resolve the issue, contact customer support or a qualified technician.

명세서

보증 및 지원

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Audio System products are designed for durability and performance, and specific warranty terms may vary by region and retailer.

For technical support, installation assistance, or further inquiries, please visit the official Audio System website or contact their authorized service centers. You can often find contact details on the product packaging or the manufacturer's web대지.

제조업체: 오디오 시스템

Web대지: www.audio-system.de