Physionics LFBD01

Physionics LFBD01 Foldable Treadmill User Manual

Model: LFBD01

소개

Thank you for choosing the Physionics LFBD01 Foldable Treadmill. This manual provides essential information for the safe assembly, operation, and maintenance of your new fitness equipment. Please read this manual thoroughly before first use and keep it for future reference.

중요 안전 지침

심각한 부상 위험을 줄이려면 런닝머신을 사용하기 전에 모든 지침과 경고를 읽으십시오. 제조업체는 이 제품의 사용으로 인해 발생한 인명 피해 또는 재산 피해에 대해 책임을 지지 않습니다.

Physionics LFBD01 Treadmill with safety lock, pulse sensors, and incline adjuster highlighted.

Image: The Physionics LFBD01 Treadmill in use, highlighting key safety features like the magnetic safety lock, pulse sensors on the handlebars, and the manual incline adjuster at the base.

Product Components and Parts

Your Physionics LFBD01 Treadmill package includes the following main components and accessories:

Assembly tools and small parts for Physionics LFBD01 Treadmill.

Image: Included assembly tools and small parts, such as L-shaped wrenches, a tightening knob, safety key, and securing pins, necessary for treadmill setup.

조립 및 설정

The Physionics LFBD01 Treadmill requires self-assembly. Follow the included multilingual assembly instructions carefully. Ensure all parts are present before beginning assembly.

짐 풀기

  1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
  2. 본체 프레임을 깨끗하고 평평한 표면에 놓으십시오.
  3. Verify all parts against the parts list in the assembly manual.

조립 단계 (일반 안내)

  1. Attach the uprights to the base frame using the provided hardware.
  2. Secure the console to the top of the uprights.
  3. Connect any necessary electrical cables between the console and the main unit.
  4. Install the handlebars and any other accessories.
  5. 모든 볼트와 나사가 단단히 조여져 있는지 확인하십시오.

기울기 조정

The treadmill features a 3-level manual incline adjustment (5, 10, or 15 degrees). Adjust the incline before starting your workout by manually setting the support legs at the rear of the treadmill to the desired position. Refer to the assembly instructions for detailed steps on how to adjust the incline safely.

작동 지침

시작하기

  1. Plug the power cord (150 cm length) into a grounded 220 V / 50 HZ outlet.
  2. Attach the safety key clip to your clothing and insert the magnetic end into the console's designated slot. The treadmill will not operate without the safety key in place.
  3. 런닝머신 벨트 위로 올라가 손잡이를 잡고 균형을 유지하세요.
  4. Press the "START" button on the console to begin your workout. The belt will start moving at a low speed.
Close-up of Physionics LFBD01 Treadmill console showing LED display, control buttons, USB port, and speakers.

이미지: 상세 view of the treadmill's control panel, featuring the LED display, buttons for speed adjustment, mode selection, start/stop, a USB port, and integrated speakers.

Console Functions and Display

The LED display (approx. 36x19 cm) shows various workout metrics:

사전 설정 프로그램

The treadmill includes 5 pre-set workout programs. Press the "MODE" button to cycle through and select a program. Each program offers varying speed and intensity profiles. Refer to the full assembly manual for detailed descriptions of each program.

Bluetooth and USB Connectivity

Physionics LFBD01 Treadmill console with a tablet in the holder, showing Bluetooth connectivity.

Image: The treadmill console featuring a tablet holder, demonstrating how users can place their devices for entertainment during workouts, with the Bluetooth symbol indicating connectivity.

접기 및 보관

The treadmill is designed to be foldable for convenient storage. To fold:

  1. 런닝머신이 꺼져 있고 플러그가 뽑혀 있는지 확인하세요.
  2. Carefully lift the running deck until it locks into an upright position.
  3. Secure the deck with the locking pin if available.

When folded, the dimensions are approximately 61 x 22 x 123 cm (L/W/H), making it suitable for smaller spaces.

Physionics LFBD01 Treadmill shown in folded position with dimensions.

Image: The treadmill depicted in its folded state, illustrating its compact design for storage, with an arrow indicating the folding motion and folded dimensions.

유지

정기적인 유지 관리는 런닝머신의 수명 연장과 안전한 작동을 보장합니다.

문제 해결

러닝머신 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

문제가능한 원인해결책
런닝머신이 시작되지 않음전원 코드가 뽑혀 있고, 안전 키가 삽입되어 있지 않으며, 전원 스위치가 꺼져 있습니다.Ensure power cord is securely plugged in, insert safety key, turn on power switch.
벨트가 미끄러지거나 멈춤벨트가 너무 헐거워졌습니다. 벨트에 윤활유를 발라야 합니다. 모터에 과부하가 걸렸습니다.Adjust belt tension, lubricate belt (refer to manual), reduce user weight or speed.
작동 중 이상한 소음Loose components, belt friction, motor issue.Check and tighten all bolts, lubricate belt, contact customer support if noise persists.
디스플레이가 작동하지 않음케이블 연결이 헐거워졌거나 전원에 문제가 있을 수 있습니다.Check console cable connections, ensure stable power supply.

For issues not listed here or if problems persist, please contact Physionics customer support.

기술 사양

모델LFBD01
모터 파워500와트
속도 범위0.8~10km/h
최대 사용자 무게100kg
경사 수준3 manual levels (5/10/15 degrees)
프로그램5개의 사전 설정 프로그램
디스플레이 유형LED (Scan, Speed, Distance, Pulse, Time, Calories)
연결성블루투스, USB 포트
전원 공급 장치220V/50Hz
총 치수(길이 x 너비 x 높이)대략. 120 x 61 x 112cm
접힌 치수(L x W x H)대략. 61 x 22 x 123cm
러닝 표면 (길이 x 너비)대략. 100 x 35.5cm
제품 무게25kg
재료Steel (tubes), PVC composite (running belt), ABS plastic (other)
Physionics LFBD01 Treadmill with key dimensions and weight labeled.

Image: An illustration of the treadmill with its key dimensions (length, width, height, running surface) and weight (25kg) clearly marked, along with the power cable length (150cm).

보증 정보

Specific warranty details are typically provided with your purchase documentation or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims. The warranty generally covers manufacturing defects under normal use conditions.

고객 지원

For further assistance, technical support, or spare parts, please contact Physionics customer service. Refer to your purchase documentation or the Physionics web연락처 정보 사이트.

관련 문서 - LFBD01

사전view Physionics Aerobic Step FSB02 사용 설명서 및 안전 가이드
Gorilla Sports GmbH에서 제공하는 Physionics Aerobic Step(모델 FSB02)에 대한 포괄적인 사용자 매뉴얼에는 안전 지침, 조립 가이드, 유지 관리, 훈련 연습 및 보증 정보가 포함되어 있습니다.
사전view Physionics Fitness Step Board FSB02 사용 설명서 및 트레이닝 가이드
본 가이드는 Physionics FSB02 피트니스 스텝 보드에 대한 포괄적인 지침을 제공하며, 조립, 안전 예방 조치, 사용 지침, 운동 루틴 및 유지 관리에 대한 내용을 다룹니다. Gorilla Sports GmbH에서 발행합니다.
사전view Physionics Espalier SPWD01C 사용 설명서 및 안전 가이드
Physionics Espalier(모델 SPWD01C)에 대한 종합 안내서로, 조립, 안전 지침, 유지 관리, 트레이닝 팁 및 보증 정보를 포함합니다. 이 문서는 피트니스 장비를 안전하고 효과적으로 사용하는 데 필요한 필수 정보를 제공합니다.
사전view Physionics HNTLB010A0000000 웨이트 벤치 사용 설명서 및 조립 가이드
Physionics HNTLB010A0000000 웨이트 벤치에 대한 종합적인 사용자 설명서 및 조립 가이드로, 안전 지침, 설치, 유지 관리 및 훈련 팁을 포함합니다.
사전view Physionics SPWD02 벽걸이 바 - 조립, 안전 및 교육 가이드
Physionics SPWD02 월 바에 대한 종합 가이드로, 조립 지침, 중요 안전 정보, 관리 및 유지보수, 그리고 트레이닝 팁을 제공합니다. 효과적인 운동을 위해 월 바를 안전하게 설치하고 사용하는 방법을 알아보세요.
사전view Physionics 벽걸이용 풀업 바(SPWD01C) - 사용 설명서 및 안전 가이드
Gorilla Sports의 Physionics 풀업 바(모델 SPWD01C)에 대한 종합적인 사용 설명서 및 안전 가이드입니다. 조립 설명서, 안전 주의사항, 사용 팁 및 보증 정보가 포함되어 있습니다.