소개
This manual provides essential information for the proper installation, operation, and maintenance of your Behringer WING-DANTE expansion card. The WING-DANTE card enables 64x64 channel Audinate Dante AoIP networking for your Behringer WING digital mixing console, facilitating high-quality, low-latency audio transmission over standard IP networks.
안전하고 효율적인 작동을 위해 제품을 사용하기 전에 이 설명서를 자세히 읽어주세요.
중요 안전 지침
- 힘: Ensure the WING console is powered off and disconnected from the mains supply before installing or removing the WING-DANTE card.
- 설치: Only qualified personnel should install this expansion card. Refer to the WING console's manual for specific instructions on installing expansion cards.
- 환경: Do not expose the device to rain, moisture, dripping, or splashing. Do not place objects filled with liquids on the device.
- 통풍: Ensure proper ventilation around the WING console to prevent overheating.
- 청소: 마른 천으로만 닦으십시오. 액체 세제나 스프레이형 세척제를 사용하지 마십시오.
- 서비스: 모든 정비는 자격을 갖춘 서비스 담당자에게 맡기십시오. 이 제품을 직접 정비하려고 하지 마십시오.
패키지 내용
포장을 뜯으신 후 모든 구성품이 있는지, 그리고 양호한 상태인지 확인해 주십시오.
- Behringer WING-DANTE Expansion Card
- 빠른 시작 가이드(해당되는 경우, 이 설명서에 포함되지 않음)
누락되거나 손상된 품목이 있는 경우 즉시 대리점에 문의하십시오.
제품 끝view
The WING-DANTE card provides a powerful interface for integrating your WING console into a Dante Audio over IP network. It features dual Ethernet ports for redundant Dante networking and status indicators for network activity.
그림 1: 앞쪽 view of the Behringer WING-DANTE expansion card. Shows two Ethernet ports labeled 'PRIMARY' and 'SECONDARY', each with 'ACT/LINK 1G' status LEDs. The card is black with white text.
그림 2: 각진 view of the Behringer WING-DANTE expansion card, highlighting the side profile and the green tab for insertion/removal. The two Ethernet ports and status LEDs are visible.
주요 특징:
- 64-channel 48 kHz, bi-directional audio interface for Dante IP networks.
- Low-latency 24-bit signal transmission with sample-accurate synchronization.
- Interfacing with standard 100 Mbit/s or Gigabit network infrastructure with DSCP-based QoS.
- 혼합ample and bit rates can coexist on the same Dante network.
- WING remote control possible on the same network, using the integrated Ethernet switch.
설정 및 설치
- Power Off WING Console: Before beginning, ensure your Behringer WING digital mixing console is completely powered off and disconnected from the main power supply.
- 확장 슬롯 찾기: Refer to your WING console's user manual to identify the expansion card slot.
- Insert WING-DANTE Card: Carefully align the WING-DANTE card with the expansion slot. Gently push the card into the slot until it is firmly seated. Do not force the card.
- 보안 카드: If your WING console has securing mechanisms for expansion cards (e.g., screws or latches), ensure the WING-DANTE card is properly secured.
- 네트워크 케이블을 연결합니다: Connect standard Ethernet cables from your Dante network to the 'PRIMARY' and 'SECONDARY' ports on the WING-DANTE card. For redundant operation, connect both. For non-redundant, connect to 'PRIMARY'.
- Power On WING Console: Reconnect the WING console to the main power supply and power it on. The console should detect the new WING-DANTE card.
- 펌웨어 업데이트(필요한 경우): 베링거를 확인해 보세요 website for any firmware updates required for the WING console or the WING-DANTE card to ensure optimal compatibility and performance.
For detailed instructions on configuring Dante networks, refer to the Audinate Dante documentation and software (Dante Controller).
작업
Dante Network Configuration:
The WING-DANTE card integrates seamlessly with the Dante ecosystem. Configuration is primarily managed using Audinate's 단테 컨트롤러 software, available for Windows and macOS.
- Install Dante Controller: Download and install the latest version of Dante Controller from the Audinate web사이트 (www.audinate.com).
- 네트워크 연결 : Ensure your computer running Dante Controller is connected to the same network as your WING-DANTE card.
- 장치 인식: Open Dante Controller. Your WING console with the WING-DANTE card should appear as a recognized Dante device.
- 오디오 라우팅: Use Dante Controller to establish audio routes between the WING-DANTE card (representing your WING console's inputs/outputs) and other Dante-enabled devices on your network.
- 시계 동기화: Dante automatically manages clock synchronization. Ensure one device is designated as the master clock, or allow Dante to automatically select one.
- IP 주소 지정: By default, Dante devices use Automatic Private IP Addressing (APIPA). For larger or more complex networks, you may configure static IP addresses or use DHCP.
상태 표시기 :
The WING-DANTE card features LEDs next to each Ethernet port:
- ACT (Activity) LED: Flashes to indicate network data activity.
- LINK 1G (Link/Speed) LED:
- 녹색(단색): Indicates a 1 Gigabit Ethernet link.
- 주황색(단색): Indicates a 100 Megabit Ethernet link.
- 끄다: 네트워크 링크가 감지되지 않았습니다.
유지
- 청소: Use a soft, dry cloth to clean the exterior of the WING-DANTE card. Do not use abrasive cleaners, solvents, or waxes.
- 펌웨어 업데이트: 베링거 제품을 주기적으로 점검하세요 website for new firmware versions for both the WING console and the WING-DANTE card. Keeping firmware updated ensures optimal performance, compatibility, and access to new features.
- 환경 조건: Operate and store the card within recommended temperature and humidity ranges to prevent damage. Avoid extreme temperatures and high humidity.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| WING-DANTE card not recognized by WING console. | Card not fully seated; console firmware outdated. | Power off, reseat the card firmly. Check Behringer website for WING console firmware updates. |
| No network link (LINK 1G LED off). | Faulty Ethernet cable; network switch off/misconfigured; incorrect port. | Check Ethernet cable connections. Verify network switch is powered on and configured correctly. Try a different port or cable. |
| Dante Controller does not see the WING-DANTE card. | Computer not on same network; firewall blocking; IP address conflict. | Ensure computer is on the same subnet. Temporarily disable firewall. Check for IP address conflicts using network tools. |
| Audio dropouts or glitches. | Network congestion; incorrect clocking; high latency settings. | Ensure network is dedicated for Dante traffic. Verify clock master is correctly set in Dante Controller. Adjust Dante latency settings (increase if necessary). Use Gigabit switches. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | 윙 단테 |
| 채널 | 64x64 (bi-directional) |
| Samp르 레이트 | 48kHz |
| 비트 깊이 | 24비트 |
| 연결성 | Ethernet (Dante AoIP) |
| 네트워크 호환성 | Standard 100 Mbit/s or Gigabit Ethernet |
| QoS 지원 | DSCP 기반 QoS |
| 치수(높이 x 너비 x 깊이) | 약 1.42 x 5.67 x 5.12mm(36 x 144 x 130인치) |
| 무게 | 약 12.1온스(343g) |
| 호환 장치 | Behringer WING Digital Mixing Console |
그림 3: Rear label of the WING-DANTE card showing model number, manufacturer, and regulatory compliance markings (FCC, CE, UKCA, EAC).
보증 및 지원
자세한 보증 정보 및 기술 지원은 베링거 공식 웹사이트를 방문하십시오. website or contact your local Behringer distributor.
베링거 공식 Web대지: www.behringer.com
Product registration is recommended to receive updates and support.
