소개
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your HVAC 4MXF8518A10N0A 18,000 BTU Console Indoor Mini-Split Heat Pump Unit. Please read this manual thoroughly before attempting to install or operate the unit. Keep this manual for future reference.
This unit is designed for indoor use and requires a compatible outdoor unit for complete system functionality. The remote control is not included with this indoor unit.
안전 정보
WARNING: RISK OF ELECTRIC SHOCK. MAY CAUSE INJURY OR DEATH.
Always disconnect all electric power supply before servicing or performing any maintenance on the unit. Failure to do so can result in severe injury or death.
This appliance must be properly grounded. Do not operate the unit with damaged wiring or if it is not functioning correctly. Refer all servicing to qualified service personnel.
Image showing the product's warning label, detailing electrical shock risk and the necessity to disconnect power before servicing. It also lists model number, rated voltage, frequency, cooling/heating capacity, fan motor amp, design pressures, and refrigerant type.
설정 및 설치
Installation of this mini-split heat pump unit should only be performed by a certified HVAC technician. Improper installation can lead to inefficient operation, damage to the unit, or safety hazards.
- 짐 풀기: 제품을 포장에서 조심스럽게 꺼내세요. 배송 중 손상된 부분이 있는지 확인하세요.
- 설치: The unit is designed to be a console-style indoor unit. Ensure the mounting surface is sturdy and level.
- 냉매 연결: The unit uses R-410A refrigerant. Connections are 1/4" X 1/2" Flare. Ensure all connections are secure and leak-free.
- 전기 연결: The unit requires a 208-230V, 60Hz, 1 Phase power supply. All electrical wiring must comply with local and national electrical codes.
Image showing the front of the indoor console unit, still partially covered in protective plastic film and secured with tape, as it would appear upon unboxing.
Image displaying the underside of the indoor unit, revealing the structural components and potential mounting points for installation.
작동 지침
This indoor unit is designed for individual zone temperature control, allowing precise climate management in the room where it is installed. Operation is typically managed via a compatible remote control (not included) or a wall-mounted thermostat.
- 전원 켜기/끄기: Use the designated button on your remote or thermostat to turn the unit on or off.
- 모드 선택: Select between Cooling, Heating, Fan, or Dry modes as needed.
- 온도 조절: 위/아래 화살표를 사용하여 원하는 온도를 설정하세요.
- 팬 속도: 최적의 편안함과 소음 수준을 위해 팬 속도를 조절하세요.
- 타이머 기능: If available on your remote/thermostat, set timers for automatic operation.
유지
Regular maintenance ensures the longevity and efficiency of your unit. Always disconnect power before performing any maintenance.
- 공기 필터 청소: 공기 필터는 2~4주마다 청소하거나, 사용량이 많거나 먼지가 많은 환경에서 사용하는 경우에는 더 자주 청소하십시오. 필터를 분리하여 순한 비누와 물로 세척하고, 깨끗이 헹군 후 완전히 건조시킨 다음 다시 장착하십시오.
- 외부 청소: 부드러운 천으로 기기 외부를 닦아주세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- 전문적인 서비스: Schedule annual professional maintenance to check refrigerant levels, clean coils, and inspect electrical components.
문제 해결
서비스에 문의하기 전에 다음과 같은 일반적인 문제를 확인하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다 | No power; remote batteries dead; circuit breaker tripped | Check power supply; replace remote batteries; reset circuit breaker |
| 냉방/난방이 부족합니다 | Dirty air filter; blocked airflow; incorrect mode/temperature setting; low refrigerant | Clean air filter; clear obstructions; adjust settings; contact technician for refrigerant check |
| 비정상적인 소음 | Loose parts; foreign object; fan motor issue | Inspect unit; contact technician |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 자격을 갖춘 서비스 기술자에게 문의하세요.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 4MXF8518A10N0A |
| 정격 볼륨tage | 208-230V/1 |
| 정격 주파수 | 60Hz |
| 냉각 용량 | 18,000 BTU/시 |
| 가열 용량 | 19,800 BTU/시 |
| Input Fan Motor Amp | 0.15A |
| 설계 압력(높음) | 550 피지 |
| 설계 압력(낮음) | 240 피지 |
| 냉각제 | R-410A |
| 연결 | 1/4" X 1/2" Flare |
| 제품 크기(높이 x 너비 x 깊이) | 23-3/4"H X 27-1/2"W X 8-1/2"D |
| 품목 무게 | 40파운드 |
| 시어 | 18 |
| BEE 별점 | 4성 |
Image showing the main view of the indoor console unit, highlighting its compact design.
보증 및 지원
For warranty claims or technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. The serial number for warranty purposes can typically be found on a label on the unit or its packaging.
The model number for this unit is 4MXF8518A10N0A. A typical serial number format might be similar to S130901626X, as seen on product packaging.
Image of the product box label, clearly displaying the model number 4MXF8518A10N0AA and a section for the serial number, which is crucial for warranty and support.
For customer support regarding your purchase, you may also refer to the seller's customer service channels.
