1. 서론
This manual provides detailed instructions for the safe and efficient operation of the Komshine GX39 Fiber Fusion Splicer. The GX39 is designed for precise fiber optic splicing with features such as fast splicing and heating times, low splice loss, and a versatile 3-in-1 fiber holder. Please read this manual thoroughly before using the device.
위에view of the Komshine GX39 Fiber Fusion Splicer highlighting its core features.
2. 안전 정보
부상과 장비 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- Do not look directly into the fiber end when the splicer is operating, as invisible laser light may be present.
- 작업 공간이 깨끗하고 조명이 밝은지 확인합니다.
- Handle optical fibers with care; they are fragile and can cause splinters.
- 기기를 물과 과도한 습기로부터 멀리하세요.
- 제공된 전원 어댑터와 배터리만 사용하십시오.
- 직접 기기를 분해하거나 수리하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
3. 패키지 내용
Verify that all items are present in your Komshine GX39 package:
- Komshine GX39 Fiber Fusion Splicer
- 파이버 스트리퍼
- 광섬유 절단기
- AC 어댑터
- 리튬 배터리(5200mAh)
- 예비 전극
- 충전기
- 냉각 트레이
- Operation Manual CD
- 운반 케이스
- 청소용 물티슈
Complete Komshine GX39 Fiber Fusion Splicer kit.
4. 설정 및 작동
Follow these steps for proper setup and operation of the GX39 Fusion Splicer.
4.1. 배터리 충전
The GX39 is equipped with a 5200mAh lithium battery. Connect the AC adapter to the splicer and a power outlet to charge the battery. A full charge allows for approximately 320 splicing and heating cycles.
4.2. Fiber Preparation
Proper fiber preparation is crucial for successful splicing.
- 섬유를 벗겨내세요: Use the fiber stripper to remove the outer coating of the optical fiber to the required length.
- 섬유를 깨끗하게 세척하세요: After stripping, use cleaning wipes moistened with alcohol to thoroughly clean the bare fiber. This removes any residue that could affect splice quality.
- 섬유를 분리하세요: Place the cleaned fiber into the optical fiber cleaver. Ensure the fiber is positioned correctly for a precise, perpendicular cut. The cleaver features a tungsten steel blade for a smooth cut surface and has a blade life of up to 48,000 times with a cleaving angle of less than 0.5 degrees.
Optical fiber cleaver with tungsten steel blade for precise cuts.
4.3. Fiber Placement and Splicing
The GX39 features a 3-in-1 fiber holder compatible with various fiber types.
- Place the Fiber: Open the splicer's cover and carefully place the prepared fibers into the 3-in-1 fiber holders on both sides. Ensure the fiber ends are aligned in the V-grooves. The holder supports 3.0mm jumper, 0.9mm pigtail, FTTH fiber, and bare fiber.
- 접합 시작: Close the cover. The splicer will automatically detect the fibers and begin the alignment process. The 3.5-inch 800*480 HD LCD screen will display the fiber alignment.
- Splicing Cycle: The GX39 performs fast splicing in approximately 9 seconds. The screen will show the estimated splice loss, typically around 0.01dB for SM fiber.
The 3-in-1 fiber holder accommodates various fiber types.
Splicer display showing fiber alignment and estimated loss.
4.4. Heat Shrinking
After successful splicing, the splice point needs protection.
- Position Heat Shrink Tube: Move the heat shrink tube over the welded fiber joint.
- Place in Heater: Carefully place the fiber with the heat shrink tube into the heating oven.
- 가열 주기: Close the heater cover. The GX39 performs fast heating in approximately 20 seconds.
- 냉각: Once heating is complete, remove the fiber and place it in the integrated cooling tray to cool down before handling.
Heat shrinking process for protecting the fiber splice.
4.5. 작동 영상 가이드
This video demonstrates the complete fiber optic fusion splicing process using the Komshine GX39, including fiber preparation, splicing, and heat shrinking.
5. 유지관리
Regular maintenance ensures the longevity and performance of your GX39 Fusion Splicer.
5.1. 전극 교체
The electrodes have a life of approximately 4000 splices. When the splicer indicates electrode wear or splice quality degrades, replace them. The GX39 features an innovative tool-free electrode replacement design.
Tool-free electrode replacement for convenience.
5.2. 청소
Regularly clean the V-grooves, objective lenses, and other optical components with a soft, lint-free cloth and appropriate cleaning solution. Keep the entire device free from dust and debris.
5.3. Durability and Storage
The GX39 is designed with enhanced toughness and features a silicone protective case, making it water-resistant, dust-resistant, and shock-resistant. Store the splicer in its carrying case in a dry, cool environment when not in use to protect it from environmental factors and physical damage.
Silicone protective case for enhanced durability.
6. 문제 해결
If you encounter issues with your Komshine GX39, refer to the following common troubleshooting tips:
- Poor Splice Quality: Check fiber cleave quality, clean V-grooves and electrodes, and ensure electrodes are not worn out.
- 배터리가 충전되지 않음: Verify the AC adapter connection and ensure the power outlet is functional.
- 디스플레이 문제: Restart the device. If the problem persists, contact support.
- Fiber Not Detected: Ensure fibers are correctly placed in the V-grooves and the fiber holders are properly closed.
For more complex issues, consult the detailed troubleshooting section on the provided Operation Manual CD or contact Komshine customer support.
7. 사양
| 특징 | 사양 |
|---|---|
| 스플라이싱 시간 | 9 seconds (fast splicing) |
| 가열 시간 | 20 seconds (fast heating) |
| 전극 수명 | 4000번 |
| Average Splice Loss | SM: 0.02dB; MM: 0.01dB; DS: 0.04dB; NZDS: 0.04dB |
| 배터리 용량 | 5200mAh (approx. 320 circular welds) |
| 표시하다 | 3.5 inch 800*480 HD LCD Screen |
| 광섬유 확대 | 300X (X-axis or Y-axis); 150X (X-axis or Y-axis) |
| 파이버 홀더 | 3-in-1 (SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable) |
| 데이터 저장 | 10000 groups splicing results; 100 sets of images |
| 연결성 | USB interface for data download and software updates |
| 치수 | 122mm(W) × 148mm(H) × 130mm(D) |
| 무게 | Min. 1.44kg (without battery) |
| 환경 저항성 | Water-resistant, dust-resistant, shock-resistant, high-temp-resistant |
Key specifications and features of the Komshine GX39.
8. 보증 및 지원
The Komshine GX39 Fiber Fusion Splicer comes with a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official Komshine website. For technical support, service, or spare parts, please contact Komshine customer service through their official channels.
