소개
구매해주셔서 감사합니다asing the Shinco Bluetooth Speaker. This speaker is designed to deliver powerful audio with deep bass and vibrant party lights, suitable for various occasions. It features Bluetooth connectivity, True Wireless Stereo (TWS) pairing, and multiple input options including USB, TF card, AUX, and microphone/guitar inputs. Please read this manual carefully to ensure proper use and to maximize your listening experience.
그림 1: 앞쪽 view of the Shinco Bluetooth Speaker, showcasing its dual woofers with dynamic LED lighting.
상자 안에 무엇이 들어있나요?
Upon unpacking your Shinco Bluetooth Speaker, please ensure all items are present:
- Shinco Bluetooth Speaker
- 전원 어댑터 (충전용)
- Wired Microphone (if included with your model)
- 사용자 설명서
설정
스피커 충전하기
Before first use, fully charge the speaker. Connect the provided power adapter to the DC 5V input port on the speaker and plug the other end into a wall outlet. The charging indicator light will illuminate. Once fully charged, the indicator light may change color or turn off, depending on the model. A full charge typically takes several hours.
전원 켜기/끄기
To power on the speaker, press and hold the Power button located on the control panel. You will hear an audible prompt, and the LED lights will activate. To power off, press and hold the Power button again.
그림 2: Close-up of the speaker's control panel, showing the power button, mode selection, volume controls, and various input ports.
작동 지침
블루투스 연결
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth icon or LED.
- 휴대폰이나 태블릿에서 블루투스를 켜고 사용 가능한 기기를 검색하세요.
- Select "Shinco Speaker" (or similar name) from the list of devices.
- 연결이 완료되면 확인음이 들리고 블루투스 표시등이 깜빡임을 멈춥니다.
The speaker can maintain a stable connection within 65 feet (approximately 20 meters) in an open area.
진정한 무선 스테레오 (TWS) 페어링
TWS allows you to pair two Shinco Bluetooth Speakers for a stereo sound experience.
- 두 스피커 모두 전원이 켜져 있고 Bluetooth 장치에 연결되어 있지 않은지 확인하세요.
- On one speaker (this will be the primary speaker), press and hold the TWS button. You will hear a prompt indicating TWS pairing mode.
- 기본 스피커는 자동으로 보조 스피커를 검색하여 연결합니다.
- Once paired, you will hear a confirmation sound. The LED indicators on both speakers will show a stable connection.
- Now, connect your device to the primary speaker via Bluetooth as described above. Audio will play in stereo through both speakers.
그림 3: Two Shinco speakers operating in True Wireless Stereo (TWS) mode, providing a wider soundstage.
USB/TF 카드 재생
Insert a USB flash drive or TF (Micro SD) card into the respective port on the control panel. The speaker will automatically detect the storage device and begin playing audio files (MP3, WAV, etc.). Use the playback controls (Play/Pause, Next/Previous Track) on the speaker to manage your music.
AUX 입력
Connect an external audio device (e.g., MP3 player, laptop) to the AUX input port using a 3.5mm audio cable. The speaker will automatically switch to AUX mode, or you may need to press the Mode button to select AUX. Audio will then be played from your connected device.
Microphone/Guitar Input
Plug a 1/4" microphone or guitar into the MIC/GUITAR input port. Adjust the microphone volume using the dedicated knob (if available) or the main volume control. This feature is ideal for karaoke or live performances.
파티 조명
The speaker features integrated LED party lights. Press the LED button on the control panel to cycle through various lighting modes and patterns. The lights can flash, blink, and synchronize with the rhythm of the music, enhancing the atmosphere.
유지
- 청소: 부드럽고 마른 천을 사용하여 스피커 외부를 닦으세요. 연마성 세제, 왁스 또는 용제를 사용하지 마세요.
- 저장: 스피커는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 배터리 관리 : 배터리 수명을 연장하려면 배터리를 자주 완전히 방전하지 마세요. 스피커를 사용하지 않더라도 정기적으로 충전하여 배터리 성능을 유지하세요.
- 물 노출: 이 스피커는 방수 기능이 없습니다. 물이나 과도한 습기에 노출시키지 마십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커의 전원이 켜지지 않습니다. | 배터리가 소진되었습니다. | 제공된 어댑터를 사용하여 스피커를 전원에 연결하고 충전하세요. |
| 스피커에서 소리가 나지 않습니다. | 볼륨이 너무 작습니다. 입력 모드가 잘못되었습니다. 기기가 제대로 연결되지 않았습니다. | Increase volume on both the speaker and the connected device. Ensure the correct input mode (Bluetooth, AUX, USB/TF) is selected. Reconnect the device. |
| 블루투스 연결에 실패했습니다. | Speaker is out of range; device's Bluetooth is off; speaker is connected to another device. | Move the device closer to the speaker. Ensure Bluetooth is enabled on your device. Disconnect from other devices and try pairing again. |
| TWS 페어링이 실패합니다. | 스피커 간 거리가 너무 멀어요. 스피커 하나는 이미 블루투스로 연결되어 있어요. | Ensure both speakers are close to each other. Disconnect any Bluetooth devices from both speakers before initiating TWS pairing. |
| Microphone sound is poor or absent. | Microphone not fully plugged in; microphone volume too low; faulty microphone. | Ensure the microphone is securely plugged into the 1/4" input. Adjust microphone volume. Test with another microphone if possible. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | B08PTZVWF2 |
| 치수(HWD) | 22.83 x 11.42 x 10.63인치 (제품 특징 설명에 따르면 약 21 x 9.65 x 8.66인치) |
| 무게 | 10.38파운드 |
| 연결성 | Bluetooth, USB, TF Card, AUX (3.5mm Jack), 1/4" Microphone/Guitar Input |
| 특별 기능 | Party Lights (LED), True Wireless Stereo (TWS), Built-in Handles |
| 전원 | 배터리 구동(리튬 이온 배터리 1개 포함) |
| 색상 | 검정, 빨강 |
그림 4: Shinco Bluetooth Speaker illustrating its physical dimensions.
보증 및 지원
Shinco products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical support, troubleshooting assistance, or warranty claims, please contact Shinco customer service. Contact information can typically be found on the product packaging or on the official Shinco website. Please have your product model number (B08PTZVWF2) and proof of purchase ready when contacting support.