소개
Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
안전 정보
경고: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltag전압 범위는 100-277V입니다.
제품 특징
- Bright & Powerful: Equipped with energy-efficient 45W LEDs, delivering 3750 lumens of illumination.
- Tunable Light (3CCT): Offers three selectable color temperatures (3000K warm white, 4000K cool white, 5000K daylight) to customize your lighting ambiance.
- 부드러운 밝기 조절: Features flicker-free Triac dimming, allowing brightness adjustment from 10% to 100% with compatible dimmer switches.
- 멀티볼tage 작업: Operates efficiently within a 100-277V range, ensuring stable performance.
- 긴 수명: Engineered for longevity with an average life of 50,000 hours, providing dependable lighting for over 50 years under normal use.
- 인증된 품질: ETL and Energy Star certified, complying with stringent safety and energy standards.
- 내구성 있는 디자인: Constructed with a durable alloy steel housing, frosted acrylic shade, and solid metal base, resistant to rust and impacts.
Figure 1: Key Features of the ASD LED Light Fixture.
Figure 2: 3CCT Color Temperature Options.
설치 지침
필요한 도구: Screwdriver, Wire Strippers, Drill (if anchors are needed).
중요한: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- 고정물 준비: Unscrew the cap nuts counter-clockwise and carefully remove the metal ring and the lens from the fixture.
- 장착 플레이트 부착: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
- 배선 연결: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
- Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Figure 3: Installation Steps.
For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)
작동 지침
Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.
유지
The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp 천을 사용하십시오. 연마성 세척제나 용제를 사용하지 마십시오. 마감재나 전기 부품이 손상될 수 있습니다.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 고정 장치에 전원이 공급되지 않습니다. 배선이 잘못되었습니다. 스위치에 결함이 있습니다. | 회로 차단기/퓨즈를 확인하십시오. 배선 연결 상태를 확인하십시오. 스위치를 테스트하거나 교체하십시오. |
| 예상치 못하게 불빛이 깜빡이거나 어두워집니다. | 호환되지 않는 디머 스위치. 배선 연결이 느슨합니다. 권tag전자 변동. | Ensure dimmer is Triac compatible. 모든 배선을 점검하고 고정하세요. Verify stable power supply (100-277V). |
| 광량이 너무 낮거나 높습니다. | 조광 설정. Incorrect CCT selection. | Adjust dimmer to desired level. Re-check CCT switch setting on fixture (requires re-accessing fixture). |
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 자폐증 |
| 모델명 | LED 이중 링 플러시마운트 |
| 품목 모델 번호 | A-LFMOV-M32D45C-N-2p |
| 색상 | Brushed Nickel (2pk) |
| 재료 | Durable Alloy Steel Housing, Frosted Acrylic Shade, Matte White Diffuser Cover, Solid Metal Base |
| 제품 치수 | 32.44인치 길이 x 18.13인치 너비 x 4.81인치 높이 |
| 광원 유형 | 주도의 |
| 왓tage | 45 와트 |
| 명도 | 3750루멘 |
| 밝은 색상 | 3000K/4000K/5000K (CCT Adjustable) |
| 권tage | 100-277 볼트 |
| 밝기 조절 가능 | Yes (Triac Dimming) |
| 평균 수명 | 50,000시간 |
| 인증 | ETL, Energy Star, cETL |
| 실내/실외 사용 | 실내(Damp 위치 평가) |
| 품목 무게 | 7.8 파운드 |
| 포함된 구성 요소 | Light Fixture, Mounting Plate, Screws, Anchors, Wire Nuts |
Figure 4: Product Specification Diagram.
보증 및 지원
This ASD LED Flush Mount Light Fixture is covered by a 5년 제조사 보증. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting web대지.
Figure 5: Warranty and Certifications.
제품 응용 예amp레
Figure 6: Versatile Applications of the Light Fixture.
