CRAFTSMAN CMXEHAO80FAK

CRAFTSMAN 80,000 BTU Forced Air Kerosene/Diesel Portable Heater Instruction Manual

Model: CMXEHAO80FAK

1. 안전 정보

Read and understand all instructions before operating this heater. Failure to follow these instructions may result in fire, explosion, electric shock, or serious injury.

  • 통풍: Always ensure adequate ventilation when operating the heater. This unit is designed for use in indoor/outdoor construction and commercial environments where proper ventilation is available.
  • 연료: Use only Kerosene, #1 and #2 Diesel Fuel, or JP-8 (Jet A Fuel). Do not use gasoline or other volatile fuels.
  • 놓기: Position the heater on a stable, level surface. Maintain clear distances from combustible materials as specified in the operating manual.
  • 작업: Never leave the heater unattended while burning. Keep children and pets away from the heater.
  • 안전 기능: This heater is equipped with a high temperature safety shut-off switch and a photo cad cell flame sensor to ensure safe operation.

2. 제품 오버view

The CRAFTSMAN 80,000 BTU Forced Air Portable Heater is a robust heating solution designed for demanding environments such as garages, workshops, job sites, and farms. It features durable steel construction, a factory-installed thermostat, and the versatility to run on multiple fuel types including kerosene, diesel, and JP-8 without conversion. The unit is capable of heating up to 2,000 square feet.

CRAFTSMAN 80,000 BTU Forced Air Portable Heater

Figure 1: CRAFTSMAN 80,000 BTU Forced Air Portable Heater, side view.

3. 설정

3.1 포장 풀기 및 조립

  • 히터를 포장에서 조심스럽게 꺼내세요.
  • Inspect the unit for any damage. If damaged, do not operate and contact customer service.
  • Attach the handle using the provided screws. This is the only assembly required.
Close-up of the heater's handle

Figure 2: Close-up of the heater's handle for portability.

3.2 히터에 연료 공급하기

  • 연료를 넣기 전에 히터가 꺼져 있고 플러그가 뽑혀 있는지 확인하십시오.
  • Unscrew the fuel cap located on the top of the fuel tank.
  • Fill the tank with clean Kerosene, #1 or #2 Diesel Fuel, or JP-8 (Jet A Fuel). Do not overfill.
  • Monitor the fuel gauge to prevent overfilling.
  • 연료 캡을 단단히 닫으세요.
Close-up of the fuel cap on the heater

Figure 3: Fuel cap location for filling the tank.

Close-up of the fuel gauge on the heater

Figure 4: Fuel gauge indicating fuel level.

3.3 배치 및 전원 연결

  • 히터를 단단하고 평평한 표면에 놓으십시오.
  • Ensure adequate ventilation. This heater is suitable for indoor/outdoor construction and commercial environments with proper air circulation.
  • Keep the heater at a safe distance from walls, furniture, and any combustible materials.
  • Plug the heater into a properly grounded 110V/120V AC outlet.

4. 사용 설명서

4.1 히터 작동시키기

  • Ensure the heater is fueled and properly connected to power.
  • Turn the power switch to the 'ON' position. The heater will begin its ignition sequence.
  • The photo cad cell flame sensor will detect the flame, and the heater will start producing heat.
Close-up of the control panel with power switch and thermostat dial

Figure 5: Control panel showing the power switch and thermostat dial.

4.2 온도 조절

  • Use the thermostat control dial on the control panel to set the desired temperature.
  • 히터는 설정된 온도를 유지하기 위해 자동으로 켜지고 꺼집니다.

4.3 종료

  • 전원 스위치를 'OFF' 위치로 돌리세요.
  • Allow the heater to cool down completely before unplugging or moving.

5. 유지관리

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is OFF, unplugged, and cool before performing any maintenance.

  • 청소: Keep the exterior of the heater clean. Use a soft, damp 천. 연마성 세척제는 사용하지 마십시오.
  • 연료 필터: Refer to the owner's manual for instructions on checking and cleaning the fuel filter.
  • Split Upper Shell: The unit features a split upper shell design for easy access during maintenance.
  • 저장: 히터를 장기간 보관할 경우 연료 탱크를 비우고 본체를 깨끗하고 건조하게 유지하십시오. 서늘하고 건조한 곳에 보관하십시오.

6. 문제 해결

히터가 제대로 작동하지 않을 경우, 고객 지원 센터에 문의하기 전에 다음의 일반적인 문제들을 먼저 확인해 보세요.

문제가능한 원인해결책
히터가 시작되지 않습니다No power, no fuel, or safety switch activated.Check power connection, ensure fuel tank is not empty, reset safety switch if tripped.
히터가 예기치 않게 꺼집니다.Overheating, low fuel, or flame sensor issue.Ensure proper ventilation, refill fuel, clean flame sensor.
이상한 냄새나 연기Improper fuel, poor ventilation, or dirty components.Use correct fuel, increase ventilation, clean unit.

7. 사양

특징세부 사항
상표장인
모델 번호CMXEHAO80FAK
열 출력80,000비티유
난방 범위최대 2,000 평방 피트
연료 유형Kerosene, #1 & #2 Diesel Fuel, JP-8 (Jet A Fuel)
특징Portable, Thermostat Control, Safety Shut-off
건설강철
제품 치수29인치 깊이 x 16인치 너비 x 17인치 높이
품목 무게34.1파운드
한국어:089301003323
Dimensions of the CRAFTSMAN 80,000 BTU Forced Air Portable Heater

Figure 6: Product dimensions for the portable heater.

8. 보증 및 지원

For warranty information, technical support, or to order replacement parts, please refer to the official CRAFTSMAN product manual included with your heater or visit the CRAFTSMAN web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.

관련 문서 - CMXEHAO80FAK

사전view CRAFTSMAN CMXEHAO80FAK 등유/디젤 강제 공기 히터 사용 설명서
This instruction manual provides detailed information for the CRAFTSMAN CMXEHAO80FAK Kerosene/Diesel Forced-Air Heater, covering safety precautions, operating instructions, maintenance, troubleshooting, and specifications. Designed for temporary heating in construction, alteration, or repair environments.
사전view CRAFTSMAN CMXEHA080FAK 등유/디젤 강제 공기 히터 사용 설명서
CRAFTSMAN CMXEHA080FAK 등유/경유 강제 공기 히터 사용 설명서입니다. 건설 및 작업장 난방 용도에 대한 안전 경고, 작동 지침, 유지 관리, 문제 해결 및 보증 정보가 포함되어 있습니다.
사전view CRAFTSMAN CMXEHA080FAK Kerosene/Diesel Forced-Air Heater Instruction Manual
This document provides comprehensive operating, safety, maintenance, and troubleshooting instructions for the CRAFTSMAN CMXEHA080FAK Kerosene/Diesel Forced-Air Heater. It includes detailed specifications, a parts list, wiring diagram, and warranty information.
사전view Craftsman Propane Forced-Air Heater Instruction Manual
This instruction manual provides essential information for the safe and effective operation of the Craftsman Propane Forced-Air Heater, designed for temporary heating in construction, alteration, or repair environments. It details critical safety precautions, operating instructions, maintenance procedures, and specifications for models CMXEHA060FAV and CMXEHA0125FAV.
사전view Craftsman 113225900 벨트 및 디스크 샌더 사용 설명서
이 사용 설명서는 Craftsman 113225900 벨트 및 디스크 샌더의 조립, 작동, 안전 지침, 유지 관리 절차 및 문제 해결 요령을 포함하여 자세한 사용 설명서를 제공합니다.
사전view CRAFTSMAN 19.5인치 장작 난로 사용 설명서
CRAFTSMAN 19.5인치 장작 난로 공식 사용 설명서입니다. 필수 안전 정보, 조립 단계, 작동 방법, 유지 관리 지침 및 보증 정보를 제공합니다.