1. 제품 오버view
The JBC Tools CD-2SQF is a high-performance digital soldering station designed for professional use. It offers precise temperature control and rapid heat-up, making it suitable for a wide range of soldering applications. This manual provides essential information for the safe and efficient operation of your soldering station.
그림 1: JBC Tools CD-2SQF Digital Soldering Station. This image shows the compact soldering station with its integrated stand, cleaning accessories (brass wool and sponge), and the connected T210 soldering iron. The station features a digital display showing temperature and power, along with control buttons.
패키지 내용:
- CD 제어 장치
- T210 Soldering Iron (tip not included)
- CL6210 브라스울
- S0354 스폰지
- 전원 단자
- 사용자 설명서
2. 설정 지침
짐 풀기: Carefully remove all components from the packaging. Inspect for any signs of damage during transit. Retain packaging for future storage or transport.
놓기: Place the CD-2SQF control unit on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
납땜 인두 연결: Connect the T210 soldering iron cable to the designated port on the front of the CD control unit. Ensure the connection is secure.
Prepare Cleaning Station:
- Insert the CL6210 brass wool into its designated compartment on the station.
- Moisten the S0354 sponge with clean water and place it in its compartment. The sponge should be damp, 젖지 않습니다.
전원 연결: Connect the power plug to the power input on the rear of the CD control unit. Then, plug the power cord into a grounded electrical outlet (230V AC, 50/60Hz).
초기 전원 켜기: Press the power button on the unit. The LED display will illuminate, indicating the station is ready for operation.
3. Operating the Soldering Station
3.1. 기본 동작
전원 켜기/끄기: Press the power button to turn the station on or off. The display will show the current temperature and power status.
온도 조절: 사용하세요 UP 그리고 아래에 arrow buttons on the control unit to adjust the desired soldering temperature. The temperature range is 90-450 °C.
팁 세척: Regularly clean the soldering iron tip using the brass wool or the damp sponge. This removes excess solder and oxidation, ensuring optimal performance and tip longevity.
납땜: Apply the soldering iron tip to the joint to be soldered, then feed solder onto the heated joint. Ensure proper wetting and flow of the solder.
대기 모드: When the soldering iron is placed in its stand, the station automatically enters standby mode, reducing the tip temperature to prolong its life and save energy.
3.2. Advanced Features (Refer to full manual for details)
- 메뉴 탐색: 사용하세요 메뉴 button to access advanced settings such as temperature presets, sleep mode settings, and unit calibration.
- PIN 보호: The station may feature a PIN protection option to prevent unauthorized temperature changes.
- 펌웨어 업데이트: JBC may release firmware updates for enhanced functionality. Consult the official JBC web지침 사이트.
4. 유지관리 및 관리
Regular maintenance ensures the longevity and optimal performance of your JBC CD-2SQF soldering station.
팁 유지 관리: Always tin the soldering iron tip with a small amount of solder before storing it or turning off the station. This prevents oxidation.
역 청소:
- Wipe the control unit and stand with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- Periodically replace the brass wool and sponge as they wear out or become excessively dirty.
케이블 검사: Regularly inspect the soldering iron cable and power cord for any signs of damage, fraying, or kinks. Replace damaged cables immediately.
저장: When not in use for extended periods, disconnect the station from power and store it in a clean, dry environment.
5. 문제 해결
이 섹션에서는 납땜기를 사용하면서 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 방송국 전원이 켜지지 않습니다. | 전원 공급 안 됨; 전원 코드 불량; 내부 퓨즈 단선. | Check power connection and outlet. Inspect power cord for damage. If fuse is suspected, contact authorized service. |
| 납땜인두가 가열되지 않습니다. | Soldering iron not properly connected; faulty heating element/tip; station in standby/sleep mode. | Ensure iron is securely connected. Check if the station is in standby (remove iron from stand). Replace tip if necessary. Contact service if problem persists. |
| 온도 표시에 오류가 표시됩니다. | Sensor malfunction; connection issue. | Turn off and restart the station. Check iron connection. If error persists, contact JBC support. |
| Poor solder joint quality. | Incorrect temperature; dirty/oxidized tip; improper soldering technique. | Adjust temperature. Clean and tin the tip. Review soldering technique. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact JBC customer support or an authorized service center.
6. 기술 사양
| 모델 | CD-2SQF |
| 상표 | 제이비씨(JBC) |
| 힘 | 40 와트 |
| 권tage | 230 볼트 |
| 온도 범위 | 90 - 450 °C (194 - 842 °F) |
| 온도 안정성 | ±1.5°C(±3°F) |
| 치수(길이 x 너비 x 높이) | 11 x 19 x 15cm(4.3 x 7.5 x 5.9인치) |
| 무게 | 3.51kg(7.74파운드) |
| 디스플레이 유형 | 주도의 |
| 재료 | 플라스틱 |
7. 보증 및 지원
JBC products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official JBC web사이트를 방문하거나 현지 유통업체에 문의하세요.
온라인 리소스: www.jbctools.com
고객 서비스: Refer to the contact information provided on the JBC web귀하의 지역에 대한 사이트.
